DIY beaded tree by master. Simple ways to weave trees from beads

Are you eager to do DIY golden tree made of beads at home? Then read this article, it tells and describes everything step by step! It will be interesting!

The craft with the self-explanatory name “Golden Autumn” is a tree made of beads, decorated with all the shades of the autumn season. At your request, it can become a wonderful decoration for your home or an original gift for lovers of everything unusual.

Think about what kind of tree you want to create - a slender birch, a majestic oak, a mysterious ash or a branchy maple. It may be a non-existent tree from a fantasy world, but it is sure to be dressed in crimson, yellow and golden colors.

Depending on how you want the base and trunk of the tree to look, you may need paint, fabric, tape, or plaster.

If you don’t have any materials, don’t be afraid to experiment - replace acrylic paints with floss threads, or do without varnish for the final painting.

The step-by-step diagram presented on the site is just a sample and a set of tips. The final appearance of the golden tree depends solely on your ingenuity and the items at hand.

Necessary materials:

Beads of different shades;
Thin and thick copper wire (diameter 0.3-0.5 mm and 1.2-2 mm);
Steel or aluminum wire;
Floss threads or colored adhesive tape;
Scissors;
Wire cutters;
Container for wood;
Bowl for preparing the mixture;
Alabaster, sand and cement;
Water;
PVA glue;
Foil;
Paint brushes;
Sandpaper and soft sponge;
Gouache;
Acrylic lacquer;
Decorative elements (pebbles, artificial moss, small cones, etc.).

Manufacturing

Twig for a tree

To make the tree's foliage look as natural as possible, it is better to collect a sufficient number of bags of beads in different tones: dark red, red, orange, yellow, gold.

About 4-5 bags of 150 grams will be enough. Translucent beads will look great.

To achieve the fall foliage effect, we will make several batches of twigs, each with a different color.

The branches will be arranged from darker to lighter colors, starting from the top of the crown. This way you will get a smoothly changing range of foliage.

Take a piece of thin copper wire 40-60 cm. Step back from the edge and start stringing beads of the same color, as shown in the photo.

If you want to make small leaves, then leave 12 beads on each loop, and for large ones - up to 20 pieces.

After the first leaf, simply twist the wire a couple of centimeters, then string beads in the same way onto the two remaining ends of the wire to make the side leaves.

One branch should have 5-11 leaves, arranged symmetrically or with a slight shift.

It will turn out just fine if all the branches turn out to be absolutely identical. Give the leaves a sharp or oval shape by pulling out the loops. Bend each branch slightly into a smooth arc.

As soon as the blanks contain 15-35 branches of different colors, you can proceed to the next stage.

Take 3-4 identical branches and form them into one bundle. To do this, use pliers to carefully twist the ends of the wires from each branch together, attaching another, thicker wire (copper or aluminum) to them, then tightly wrap the stems with tape or thread, securing them.

Using the same principle, the remaining blanks are fastened into large branches.

tree trunk

Once the bundles of colorful branches are ready, it is time to make the tree trunk. Use steel or aluminum wires twisted together for the frame if it seems to you that one is not enough.

Dark red or red branches are tied to the end of the wire with tape - this will be the top. Step back a few centimeters and boldly take on the next branch.

The next tier of branches should be a little lighter - orange, then yellow and, finally, golden branches will appear closest to the roots.

About halfway through the trunk, don’t forget to add some more long, strong wire to secure the structure. Leave 4-7 cm of the ends of the wire untouched - then they can be spread apart and stable roots can be formed.

The tree trunk itself can now be slightly bent, after which the entire craft can be checked for stability.

Two barrel design options

Method one

The first method is the simplest and only requires you to additionally wrap the base of the tree in several layers of tape to create a fairly thick trunk.

Then, starting from the branches and ending with the area near the rhizomes, the craft is tightly wrapped with floss threads, leaving no gaps.

To suit your taste, choose white, brown or beige for the color of the bark.

Second

It involves the use of alabaster and acrylic and will allow you to achieve maximum realism.

First, secure the beaded parts by wrapping the branches in foil bags. Then make a solution of PVA glue, water and alabaster. Stir until the mixture is liquid and cover all the branches and trunk with it.

Wait until it dries and prepare a new gypsum mixture, this time thicker and more flexible.

Alabaster should take up most of the solution of glue and water. Apply the solution evenly to the trunk to form a complete tree.

While the solution has not dried, use a blunt needle tip or a toothpick to draw uneven rotten bark over the entire surface of the plaster, making either light or deep furrows.

After a day, the wood will completely harden and will be ready for cosmetic treatment with sandpaper. Correct any remaining unevenness with a damp sponge, removing excess or debris of plaster, including dust.

Painting

The next stage is painting. If you want to create a birch tree, all you need is white and black paint with a final layer of varnish.

The starting layer will be yellow(only the trunk is covered), the next one is dark brown (together with the branches).

Don't wait for the second coat to dry, but immediately use a damp sponge to carefully wipe away some of the brown paint from the base of the tree.

After waiting for the paint to dry, you can do the finishing touches. Coat all parts of the tree, with the exception of beaded branches, with a layer of acrylic varnish, which after drying will become transparent and add gloss.

The “ground” and the roots of the tree also need to be painted and varnished.

After this, you can free the branches from the foil and start decorating the base from which our tree will grow.

What and how to build a container from?

A small bowl or a shaped silicone baking mold can become a tub or pot for a tree.

The bottom of a plastic bottle or spray bottle works well as a base if you cut off the neck and middle of the container evenly.

Then make a gypsum solution or dilute alabaster in a deep bowl. For the solution you will need some sand, cement and gypsum.

Gradually add a little water and stir until a thick mass similar to sour cream.

Now place the roots of the tree generously in the tub, once again making sure that the tree will not tilt or fall anywhere. Fill the container with the resulting solution and leave it to harden for a couple of hours.

The resulting base, which represents the soil, all that remains is to paint and correctly arrange the decorating elements.

Moss, smooth pebbles or simple small pebbles will look best. If desired, add small pine cones or twigs nearby.

Glue them securely and fill them with varnish so that all the parts blend perfectly with the rest of the wood.

Result

Now that you have achieved what you want with your own hands, you can admire gold beaded tree, as if he had just stepped out of a festive autumn postcard.

To get a more complete understanding of the needlework process, watch the video with the master class.

Thanks to the sites masterclassy.ru and ped-kopilka.ru for the photographic materials

Evgenia Smirnova

To send light into the depths of the human heart - this is the purpose of the artist

Content

Simply by tying several beads with wire, you can create any craft - from a bracelet, earrings and a simple souvenir to a mini-tree. The items do not require special attention and care and retain their appearance for many years. Below you will find several master classes on how to create the most beautiful beaded trees.

How to make trees from beads

Beading itself is very labor-intensive, so creating decorative trees from small beads is even more difficult. This is possible if you know the principles and techniques of doing crafts. The whole process consists of several stages. This:

preparation of necessary materials;
stringing bugles and beads in a certain sequence;
creating loops of different shapes;
formation of leaves, flowers and twigs;
design of the trunk and crown.

It is easier for beginners to weave a tree of beads using specially designed patterns with a detailed description of each step. First you need to prepare the materials:

glass beads and beads of different colors;
wire of different thicknesses;
Double-sided tape;
beading needle;
threads;
floral tape;
form for “planting” a tree;
plaster, alabaster or gypsum to secure the base;
strong wire or rigid rod to make the barrel;
additional decorative elements such as stones, leaves, coins.

Sakura from beads

The first of the instructions on how to make a tree from beads will be a master class on creating cherry blossoms. In Japan it is ranked on a par with wisteria. The main thing here is the color of the material. In summer the plant will turn out to be of green shades. To create an autumn beaded tree, you will need red tones. The weaving pattern is as follows:

Take a wire of medium length and thickness. String 5-6 beads on it and twist it to form a leaf.
Make 11 such petals, keeping a distance of 1 cm between them.
Fold this wire in half and twist it like at the base of the petals.
To get lush sakura, weave about 50-70 of these blanks.
Form small branches into large ones, connecting 3-4 pieces at a time.
Weave large branches into a crown.
Attach the upper branches first to a thick rod or wire using tape or floral tape, and then lower them, weaving in all the rest.
Wrap the finished product with protection to prevent it from getting dirty.
Place the tree trunk in the mold and fill it with plaster or alabaster. Use it to treat the exposed parts.
After drying, paint and varnish everything.
Decorate the area around the trunk with pebbles, beads or moss.

Beaded birch

Step-by-step instructions for creating a birch tree are as follows:

Take a wire 0.3 mm thick and put 7 beads on it. Twist the loop - it will be central.
After 1 cm to the right and left of the middle loop, make another one, using different shades of green.
Make 5 more of these loops on each side.
Bend the wire in half, leaving the center loop at the top. Twist the ends - you should get a twig.
Make 15 branches from 9 loops that will go to the top of the crown, and 57 branches, but with 11 loops, for the remaining branches.
Twist branches with 9 loops 3 together. Repeat the same with 11-loop branches.
Count the branches - you should get 5 for the top and 19 for the rest.
Using threads, wind 1 mm thick wire to 19 branches.
From branches that have fewer loops, form 2 tree tops for 2 trunks. Wrap the wire in the same way, but with a thickness of 3 mm.
Wrap 12 branches to the main trunk with a top of 3 branches.
Attach the remaining parts to the side shoot, the top of which consists of 2 branches.
Combine 2 trunks, making the main one a little higher.
For now, pack the branches in foil.
Wrap the barrel with masking tape to give it the desired thickness.
As in the previous instructions, secure the tree in a pot or other form.
Paint the trunk and branches with a mixture of PVA and alabaster.
After 12 hours, paint them with white paint, then make black spots on top, like on a real birch tree.

Money Tree

Instructions on how to make a money tree from beads include several steps:

String 10-12 beads onto the wire. Rotate it around its axis several times to create a loop.
Without making any indentations, make about 7-8 loops to make the branch saturated.
For a lush tree, weave about 60 of these branches.
Separately, make about 20 branches with coins. Attach the latter with glue to the wire loop.
Create several compositions from 3 bunches, each of which will have 3-4 beaded branches and 1 coin branch.
Wrap the resulting branches with floral tape and cover them with gold paint.
Once the paint is dry, assemble all the branches by twisting them together and securing them with tape or double-sided tape.
Spread the lower wire ends and place the tree in the mold. Secure with plasticine, thick plaster or plaster.

Yin Yang Tree

Among the colors of beads for the Yin-Yang tree, only white and black are used. The manufacturing sequence is as follows:

As in previous master classes, make tree branches using 8 beads for each leaf. First take only black color and make the distance between the loops 1-2 cm.
Form 100 of these branches, and then make another 70, but this time from white.
Using thicker wire, combine monochromatic branches into larger ones.
Form 2 semicircles from thick wire, and twist the ends together.
Attach white branches to one semicircle and black ones to the other.
Treat the trunk with plaster, and then insert it into the mold or give the wire ends the appearance of roots.
Decorate the protruding parts of the trunk with black using a dry brush.

Love tree

This master class describes how to make a love tree from beads. The entire instruction includes just a few steps:

Make branches again, adding 5-6 beads to each petal. Better color use red or pink.
Form several larger branches.
Take 2 thick wires. Twist them at one end, and form half-arcs at the other to make a heart.
Attach all the branches to the “heart” using thread and masking tape.
Secure the base of the trunk with plaster or alabaster in some form, for example, a flower pot.
Decorate the trunk in the color of the beads.

Bonsai

The next tree of happiness made from beads is a bonsai. It is a copy of any of the dwarf plants. The instructions for making such a craft are as follows:

String a lot of green beads onto the wire.
Make 8 loops on each branch, separating 8 beads and twisting the wire.
Form buds with 3 branches each.
Prepare about 50 of these buds.
Form the top of the tree by first connecting 3 buds into one using thread wrapping.
Then fasten all sets of buds together, distributing them in separate rows along the thick wire trunk.
Wrap the trunk with masking tape, decorate with plaster and paint.
Secure the tree in shape using alabaster or plaster.

Trees made of beads: photo

Handicraft material such as beads has been used for a long time. During this time, they made everything from it - beads, bracelets and other jewelry. Today, mini-plants, which are also made using the beading technique, are becoming more and more fashionable. You can weave anything, be it a palm tree or even an oak tree. You can find inspiration for creating one of them in the pictures with examples of finished products.

Video: DIY beaded trees

Among all types of needlework, beadwork is especially complex, so often one step-by-step instruction is not enough to create such a craft. In this case, videos come to the rescue, making it much easier to complete all the steps. Not only beginners, but also experienced masters often resort to visual lessons. Therefore, watch the video instructions on how to make a tree from beads.

Products made from beads have always fascinated with their beauty and unusual design. Various bracelets and baubles made of glass balls and tubes gave the girl individuality and emphasized her unique style. It is noteworthy that such decorations originate from ancient times. At that time, products made using glass beads and threads had the function of protecting against the evil eye and damage, and served as a talisman against evil spirits. In the 60s of the 20th century, a real hairdressing boom began thanks to the emerging hippie movement. Almost entirely the clothes of the “children of the sun” were hung with various beaded ornaments. Even on the wedding day, young people exchanged not rings, but miniature baubles.

Beading is still relevant today. And for beginners in this business, it is considered interesting how to weave wood. Before you start practicing beadwork, you need to stock up on all the necessary items - fishing line, needle, hooks, knitting needles and, of course, the beads themselves. It is worth noting that different jewelry requires different beads. Weaving is recommended to be done on a non-slip surface. To do this, you can lay a tablecloth or a linen napkin on the table.

All beadwork is reproduced in accordance with special patterns. To begin with, it is recommended to choose a lighter one. You should also make sure that there will be enough material to complete the entire product. After this, you need to familiarize yourself with the weaving method, for example, see how to weave a tree. It is possible to make any ornament from beads, but for beginners it is preferable to stick to a simpler one and try to weave a flower. To do this, you will need to have wire, scissors, and beads.

You should start working by threading beads through the wire and securing them. Next, you need to weave the subsequent rows in a similar way, constantly adding one more bead. As you weave, the number of beads will need to be increased - from 2 pink to 5 red, and then, on the contrary, reduced. This is necessary to give the flower symmetry. The flower will also need a middle, which can be completed using a large bead. The last step will be to connect the middle bead and the petals of the flower by threading the wire.

For the tree you will need all the same items and green and pink beads. You need to make a loop on the wire, first stepping back 15 cm from the end, and string the beads themselves onto it. With a gap of half a centimeter, you should weave tree leaves from 4 beads. The leaves will need to be straightened, and then twisted into 5 more similar wires. Following this, 3 wires are twisted into one. The resulting branches, 3 in number, must also be twisted into one. The final step will be to paint the tree trunk with brown paint. The branches should be straightened.

At all times, people admired the creativity of great masters and needlewomen and tried to imitate them. Original products - trees made of beads are becoming increasingly popular. With their beauty and uniqueness, they attract the attention of not only lovers of needlework, but also those who want to better understand this skill.

The fascinating process of handwork, when real masterpieces are created from miniature beads, attracts more and more art connoisseurs. To understand the secrets of this needlework, it is advisable to be patient, listen to wise advice and allocate enough time. After all, creating trees from beads is quite difficult. Each branch and leaf should be given special attention, and then, by connecting individual parts, you should get a nice product. To help beginning needlewomen improve their skills, many special schemes for the creative process have been developed. They are based on the characteristics of different types of trees that can be created using beads.

Getting to know the basics of craftsmanship

Many people have heard these wise words: “Who despises the day of humble beginnings?” And indeed, every business starts small, so you shouldn’t despise the basic basics of the creative process. To learn how to weave trees from beads, you must first learn the main principles of this needlework:

stringing glass beads on wire;
creating neat loops;
connection of structural parts;
understanding of work patterns;
correct color selection.

Having mastered the basic basics, you can begin to create a tree from beads with your own hands. To do this you need to prepare the following set of items:

It is important to take into account the fact that each tree has its own characteristics, so there is no single scheme. The photo shows different types of beaded trees made by experienced craftsmen. By taking into account the main principles, you can achieve similar successes and enjoy the creation of your hands.

To make the product elegant and beautiful, it is better to use thinner wire. It is much easier to work with, especially for beginner students.

The process of creating a tree from beads includes the following simple movements:

7 beads are strung on a thin wire about 50 cm long. Placed in the center.
Bend the metal thread to form a loop. In this case, the beads are at the top.
The ends of the wire are twisted and pulled apart in different directions.
Having stepped back from the place of twisting on the right side to a distance of about 1.5 cm, again collect 7 pieces of bugles. They do the same on the left side. The ends are twisted. In this way the branches of the future tree are woven. The more of them you can make, the more attractive the product will look.
When the branches are ready, begin assembly. To do this, they are connected in pairs, twisting at the base.
Branches are attached to a dense rod or thick wire. The result is a structural trunk that holds the weaving elements.
The tree is placed in a beautiful vase or flower pot. It is pre-filled with plaster or plasticine.

Such principles are applied to the manufacture of various types of trees, not forgetting that each design has its own individual characteristics.

The simplest option on how to make a tree from beads is the manufacturing process. In the Land of the Rising Sun, this plant is considered a symbol of the awakening of nature and feminine beauty. And for beginning needlewomen, this is a good way to acquire good craftsmanship skills. For work you should purchase the following materials:

pale pink beads;
flexible wire (necessarily of different thicknesses);
masking tape;
paints or gouache.

First of all, the flexible wire is cut into pieces 20 or 30 cm long. Beads of 5 or 6 pieces are strung on each of them. After this, the ends of the wire are connected to form a beautiful leaf. Next, a branch is formed. At one level, 2 petals are tied opposite each other. Then they are connected in groups of 3 together.

To form a trunk, the woven branches are wrapped with masking tape, which is later painted with paint or gouache. The finished structure is attached to the base using plaster or alabaster. It is important to work carefully so as not to stain the sakura petals

For a beautiful tree you will need from 90 to 120 branches. Therefore, you need to patiently and slowly move towards your goal.

These simple rules for beginners help beginners create their first tree from beads and enjoy the product of their hands.

Master class - a reliable guide for needlewomen

The desire to learn and improve in any matter is worthy of praise. You can’t do without it in acquiring handicraft skills. Beadwork is considered to be a simple form of creativity, so even amateurs can make pretty trees. Master classes play an important role in this, with the help of which you can create chic things.

Amazing wisteria - video master class

Russian birch weaving option

A cute tree with cascading branches remains at the peak of its glory for centuries. Many poems have been written about him and paintings have been painted. Lovers of handicrafts couldn’t resist it either. Using a master class on weaving trees from beads, in particular birch, it is easy to create your own masterpiece.

To work, you need to prepare the following tools:

beads in four shades of green (preferably in different contrasts);
wire: 0.3 mm, 1 and 3;
threads;
glue (PVA is possible);
acrylic paints;
wide and narrow brush.

Once the items are at hand, you can begin the creative process.

First, take a wire 0.3 mm thick and cut a piece 40 cm long. 9 pieces of beads are strung on it and placed in the center of the line. Step back 6 cm from the edge of the wire to beautifully twist the loop. Up to 9 pieces are made on one thread, keeping an interval of 1 cm. Then the strips are folded in half, leaving one loop in the center.
You need to make at least 15 such copies. In a similar way, another 57 branches are woven, consisting of 11 loops. Large branches will be evenly distributed throughout the tree, and small ones will serve to form the crown.

Bugles of various shades of green must first be mixed in order to be strung on a thread in any order.

Competent bead weaving involves constant control of the number of objects connected so that the trees turn out to be of bright beauty. Therefore, the next step begins with a simple calculation of the starting material. Then the branches, which consist of 9 loops, are connected into small bouquets. There should be 5 of them.

A 1 mm thick wire is screwed to long branches and set aside. Next, a structure consisting of two trunks is formed. One is made from 3 branches, the other from 2. After this, a 3 mm thick wire is attached to each of them, wrapping it with threads.

To get a beautiful crown, 12 long shoots are tied to the upper edge of the trunk, consisting of 3 branches. 7 more elongated branches are attached to the remaining two. The connection is made so that the thick part of the structure rises 2 cm above the product. The hanging threads are wrapped with tape, leaving the ends below to make roots from them. As a result, they will serve as a reliable fastening of the tree to the base.

Plaster or alabaster is poured into a small container and a birch tree is placed in it. You need to secure it so that the structure stands directly in the center. After 12 hours, when the liquid has hardened, they begin to decorate the trunk.

To prevent paint from getting on green birch branches, they can be hidden under foil.

First, apply primer using PVA glue. After a few hours, the trunk is coated with white paint in two thin layers. Black decor is applied after the main layer has completely dried. After waiting some more time, they remove the foil, straighten the branches and admire the result of their efforts.

Patterns for weaving wood from beads

Video instructions for making willow from beads

Winter beauty - rowan

Many needlewomen have noticed that special patterns help them create magnificent trees from beads. They consist of a text manual and are often accompanied by a set of pictures. The main thing is to follow all the instructions from the masters to improve your skills.

For weaving, you need to prepare not only beads, but also bright red beads that resemble ripe berries. Since the rowan branches consist of 9 leaves and a pretty bunch, you will have to work hard to achieve the final goal. But you shouldn’t give up without testing your strength.

The first step is to cut a wire up to 70 cm long. String a green bead onto it, placing it in the very center. The next rad is formed by passing both ends of the wire simultaneously through 2 glass beads. You need to tighten them so that they are on top of the previous row. Using this principle, all 9 petals are collected.

The second step is berries. A black bead is placed on a 70 cm wire. Then both ends are threaded through the hole of a large scarlet bead. After this, they are passed through brown beads. One bunch must contain at least 16 berries.

The third step is to combine the berries with the leaves. Such a tree will require up to 100 such branches. The process is performed in the usual classical way.

The final stage - the finished branches are collected in a bunch, forming a lush crown. The ends of the wire are twisted around a rod, which serves as the trunk of the tree. The structure is dipped into a plaster solution and the autumn beauty is ready. The product can be used to decorate your home interior.

Despite the fact that beaded flowers and trees do not need moisture or sunlight, they require careful care. To keep them looking perfect, it is important to regularly remove dust from them. To do this, you can use a soft brush. It is advisable not to place it near a window. Due to sunlight, beads quickly lose their color, becoming dull. Such simple rules help you admire your handiwork for a long time.

Step-by-step weaving of an orange tree from beads

Video master class on making wood from beads

Trees made of beads are a separate direction of creativity; sometimes it is impossible to believe that this can be created from ordinary beads and wire. Today we understand the technology of making trees from beads.

Weaving a tree from beads is a labor-intensive process, because the master creates every twig and every leaf by hand. Gradually forming the crown of a tree from small parts, a whole tree is obtained. At the same time, today many different schemes have been developed that convey the characteristics of different types of trees.

How to weave a tree from beads?

To weave a tree, you first need to master the basics of beading, namely the sequence of stringing glass beads onto wire and forming even loops.

To work you will need:

Beaded tree: instructions

Since each tree is individual and differs in texture, there cannot be a single instruction; each scheme is individual. And even when you start working, you will be convinced that your result will differ from the original picture.

Bead tree for beginners

For beginners, you should start working with the simplest tree in terms of design - sakura. You will only need one color of beads in a soft pink shade.

Cut approximately 1 meter of wire for the first branch.
String 6-7 beads onto the wire and secure them by twisting the ends of the wire as shown in the picture to form a petal.
Step back approximately 1-1.5 cm and repeat steps from step 2.
Make 11 petals, fold the wire in half and weave the petals in pairs to form a twig.
For a whole tree, weave about 90-120 similar branches; large branches will be obtained by weaving 3 ordinary ones.
Gradually screw all the branches onto a thick rod to form a trunk; use tape to securely fasten it.
To attach the tree to the base, use plaster or alabaster, sculpt the tree bark and roots onto the existing base, smoothly going into the ground. Be careful not to stain the tree crown.

Beaded tree, scheme for rowan

To assemble a bright autumn beauty, you will need not only beads, but also bright red beads that look like berries.

Each rowan branch consists of 9 leaves and a bunch of berries. For the leaf, use the diagram below.
Cut the wire about 70 cm long and place a green bead in the middle.
For the next row, pass both ends of the wire through 2 beads and pull them up so that they are above the bead of the first row. And so on, according to the scheme, collect 9 petals.
For the berries, cut a wire about 70 cm long, place a black bead in the middle, pass both ends of the wire through a large red bead, and then through brown beads. According to this scheme, collect 16 berries for one bunch.
Form a branch from berries and petals. For a tree you will need about 70-100 branches.
Form all the branches into a crown and twist them around the stem-trunk; use plaster to secure the tree to the base.

Incredibly beautiful winter rowan can be made using transparent beads to imitate snow.

Step-by-step autumn tree made of beads

To weave an autumn tree, you need to use beads in yellow, red, green tones. For example, a step-by-step diagram of maple weaving.

A maple leaf consists of 5 separate petals. Each petal is woven according to the following pattern (refer to the pictures below):

string 1 red bead onto the wire and place it in the center
pass the two ends of the wire through two red beads
pass the two ends of the wire through the red, yellow and red beads
pass two ends of the wire through a red, two yellow and again a red bead
pass two ends of the wire through 3 yellow beads
pass the two ends of the wire through 2 yellow beads
pass two ends of the wire through 1 green bead

When weaving the next petal in the fifth row, pass the wire through the fifth row of the first petal to keep them together. The petal should be finished as shown in the diagram, twisting the ends together.

Assemble a leaf from 5 parts, in total you will need about 150 leaves
Form branches from 3-5 leaves, twisting the ends and securing with floral tape
Form a tree from the branches, the ends of the wire can be wrapped around a heavy stone, which will be the base
Use plaster or alabaster to give the texture of wood to the trunk
After drying, paint with acrylic paints

Tree made of beads and copper wire: step-by-step photos

The combination of delicate blue beads and rich copper color gives the feeling of an airy haze around the tree. In this example, the wire will remain uncovered, since such beauty cannot be hidden.

We offer instructions for creating such a tree with a photo:

String 17 beads onto a piece of copper wire about 80 cm long.
Form a loop in the middle of the wire, step back about 1 cm, string the beads again and form a loop on each side of the center.
Twist to form a twig. Each branch should have seven petals.
Twist about 150 branches in total.
From 3 branches, assemble a large branch, you will get 50 branches in total.
From large branches, assemble the entire trunk, forming separate large branches and smaller branches, increasing the volume towards the bottom. Wind the ends of the wire into a ring of small diameter.
Dilute the plaster in a container, fill a third of the wood mold and place the ends of the wire there, pour in the remaining plaster and hold for 10-15 minutes until the mixture sets.
You can sprinkle the remaining beads on top of the plaster.
Arrange the branches as you wish.

Beaded money tree

It is believed that the money tree or crassula will bring prosperity to the house, but if you are not a fan of plants, then you can weave an artificial tree with your own hands. To work you will need:

beads of several green shades
wire
coins
gold paint
scotch

Cut a wire about 70 cm long, string 7-8 beads of different colors onto it and form a loop, string another 7-8 beads without indentation, form a second loop, repeat 6-8 times, in the end you will get a dense bud.
Twist about 60 buds for a small tree.
Cut a wire about 50 cm long, form a small loop in the middle and twist the ends. Glue a coin to the loop; you will need 15 of these branches.
Take 1 coin branch and 4 green ones, twist them together, repeat 2 more times and from the resulting 3 branches, assemble a large branch by wrapping the wire with paper adhesive tape. Paint the ribbon golden brown. Repeat with other branches.
Wrap all branches to the stem-trunk, wrap with tape and cover the trunk with plaster. Use acrylic paint to give the natural wood color to the plaster.

Yin-Yang tree made of beads

The Yin-Yang tree is a combination of two colors of beads, white and black, symbolizing the feminine and masculine principles, as well as their interrelation and complementarity. Of course, you won’t find such trees in nature, but with the help of beads it’s easy to convey this idea.

You will need white and black beads, thin wire, a rod and a base.

Cut the wire into pieces about 70 cm long.
String 5 white beads onto the wire and form a loop in the middle, stepping back 1 cm on each side, form 2 more loops and continue until you have 7 loops on the branch. Wrap the twig with white thread or ribbon. Collect 50-60 white branches.
String 5 black beads onto the wire and form a loop in the middle, stepping back 1 cm on each side, form 2 more loops and continue until you have 7 loops on the branch. Wrap the twig with black thread or ribbon. Collect 50-60 black branches.
Gather branches of each color into a tree and twist their trunks together.
Attach to the base using plaster, decorate the top of the base with a Japanese pattern, the Yin-Yang symbol.

Tree of love made of beads

According to the manufacturing technology, the tree of love is very similar to the Yin-Yang tree; two colors are also involved here, but not such contrasting combinations as black and white, but more delicate ones, for example, blue and pink, white and blue, etc.

Such a tree will be an excellent wedding gift, because it will symbolize the strength of the ties of the family that was born today.

Cut the wire into pieces about 70-90 cm long.
String 5 pink beads onto the wire and form a loop in the middle, stepping back 1-1.5 cm on each side, form 2 more loops and continue until you have 7 loops on the branch. Wrap the twig with pink thread or ribbon. Collect 50-60 pink branches.
String 5 blue beads onto the wire and form a loop in the middle, stepping back 1 cm on each side, form 2 more loops and continue until you have 7 loops on the branch. Wrap the twig with blue thread or ribbon. Collect 50-60 blue branches.
From small branches of each color, form larger ones.
Collect branches of each color into a separate tree, weave the bases of the trunks together and lay out halves of a heart from branches of each color.
Attach it to the base using plaster, paint the trunk pink and blue, and on the base you can draw the initials of the newlyweds and the wedding date.

Wisteria - bead crafts

Wisteria is one of the most beautifully flowering plants on earth; its bright colors and incredible color transitions can captivate anyone. In beads you can convey this beauty using different shades, and the weight of the resulting branches will give the necessary shape.

You will need:

beads in purple, soft pink, green and blue shades
wire
core and base

Cut the wire into 100 pieces 1 meter long.
On each piece of wire, fold the loops as shown in the diagram, smoothly changing the color from white to purple, twist the branches. Collect 70 white-purple twigs.
Twist green loops for the foliage on the remaining pieces of wire.
Gather all the branches, imitating the hanging crown of wisteria.
Wrap the ends of the wire around a heavy base and fill with plaster.

Master class on pine beading, diagram

The most popular trees in Russia are spruce and pine; they can also be made from beads and even decorated for the New Year.

Cut the wire into 30 cm long pieces.
String 8 beads onto the wire, leaving the outermost bead, pass the second end of the wire through the remaining 7, so that you get a needle.

On the remaining end of the wire, string 8 beads again and repeat step 2. In total, you should get 5 needles on 1 wire, then twist the ends.

For a small pine tree you will need 150-200 of these blanks.

We twist small branches into larger ones, securing them with tape or tape.
We assemble a trunk from large branches, twist the ends of the wire into a skein and secure it at the base.
Spread the branches to make the pine fluffy.

Beautiful beaded tree

A beautiful tree can be made using several different techniques and by mixing materials, for example adding pebbles, gluing them to hinges, or using bright leaves.

Photo: Beaded tree

Here are a few more ideas for trees that can be made from beads.

The beading technique opens up enormous possibilities for you. From such tiny elements you can create serious masterpieces that will decorate your home and an excellent gift for family and friends. New creative success to you!