/ 12/24/2015 at 21:19

Hello, friends!

Today, my dears, we are knitting braids. Every knitter sooner or later comes to the conclusion that she needs to master these knitting techniques. After all, how beautiful and rich knitted items look with various braids and strands!

For beginner knitters, tying braids at first causes some difficulties. Therefore, let's take a step-by-step look at how to knit some of their types. And then, if you master the technique and basic principles of knitting, then in the future you can even make very complex, intricate patterns with braids, plaits and arans.

So, let's begin. Knitting all patterns with braids, without exception, Aran knitting, is based on the technique of moving loops. In order to retake loops intended for movement, you need to acquire so-called auxiliary knitting needles, which come in different thicknesses and look like this:

Or like this:

Ideally, the auxiliary knitting needle is taken a little thinner than the main working knitting needles.

When knitting using an auxiliary knitting needle, the stitches intended for displacement are re-slipped onto this knitting needle and left either in front or behind the work. Then, having knitted the next loops in the row, knit the loops from the auxiliary needle (see photo). Moreover, you can knit loops either directly from this knitting needle, or return loops from it to the main left knitting needle, and then knit - as you prefer.

But even if for some reason you don’t have such knitting devices, it doesn’t matter. For this purpose, you can use an ordinary safety pin, although it is not so convenient (I’ll tell you a secret - I often do this myself).

Let's look at what moving loops is using the example of the simplest braid. We will perform it on 8 loops. For the sample, we will cast on 14 loops (12 loops for the braid and its “framing” + 2 edge loops).

Pattern Description:

1st row: 2 purl, 8 knit, 2 purl;

From 2nd to 4th row knitting, what does the knitting look like?– we knit knit stitches over the knit stitches, and purl stitches over the purl stitches (photo 1).

photo 1 - knitted the first 4 rows

5th row: Purl 2, 4 loops re-slip, without knitting them, onto an auxiliary needle and leave ahead of the work; knit the next 4 loops (at the beginning of knitting them, try not to have a large stretch between the loops). Then we slip 4 loops from the auxiliary needle onto the left needle and also knit them. It turned out that our loops seemed to cross with an inclination to the left (see photos 2 and 3).

photo 2 - we remove 4 loops on an auxiliary needle and leave them ahead of the work

photo 3 - remove the removed loops onto the left knitting needle and knit them with knit stitches

From 6th to 12th row - we knit according to the pattern.

And if you knit such braids in a row, you get this elegant pattern:

Such simple braids can be done on 4, 6, 10 and even 12 loops, the main thing is that the number is even. It all depends on how thick the yarn you use and what “swing” of the braid you want to get.

But you need to remember that the more loops there are for the braid, the more it contracts when the loops are displaced, and therefore the yarn consumption will increase. In addition, you can adjust how many rows to move the loops. The more often (through fewer rows) you move the loops, the “tighter” the braid will be twisted; the less frequently, the looser the braid will be and will not tighten the fabric so much. It all depends on your taste and preferences.

You can knit a simple braid, leaving loops on the auxiliary needle not in front, but behind the work. Then your braids will no longer intertwine to the left, but to the right. This is what it looks like:

More complex braids use combinations with offset loops, both to the left and to the right, and can also take into account different combinations of the number of loops intended for movement. And it is because of the ability to create such different combinations that we can create so many beautiful patterns.

Now let's look at a more complex braid. Here, as I said above, we move the loops both left and right.

Pattern Description:

Braid with 16 loops. We cast on 22 loops for the sample (16 for the braid, 4 for the “framing”, +2 for the edge loops).

1st row: P2, k16, p2;

From 2nd to 6th row: knit according to the pattern;

7th row: Purl 2, slip 4 loops onto an auxiliary needle and leave behind the work, knit the next 4 loops, then knit 4 loops from the auxiliary needle; Slip 4 loops onto an auxiliary needle and leave in front of the work, knit 4, knit 4 loops from the auxiliary needle, purl 2;

From 8th to 14th row: knit according to the pattern;

15th row: repeat the pattern starting from the 7th row.

And here is a pattern reminiscent of braided pigtails. You can find out how to knit it at this page.

By combining the displacements of the loops in a different way, you can get such a pattern (see diagram and description ):

In the examples given, the braids are made along the stockinette surface. But there are exceptions when both elastic bands and smaller braids are intertwined. For example:

A slightly different principle in Aran knitting: there the tracks from the front surface move in different intricacies along the back surface. And if in braids we move loops, dividing their number equally (for example, a braid of 6 loops: move 3 at a time), then here we can, for example, move 2 or 3 loops of the front stitch along the top, and 1 loop of the purl along the bottom iron. But the principle is the same - we reshoot, move:

In this selection of knitted braids there will be plaits with elements of a pearl pattern or putka. Such braids look very beautiful on headbands, hats and trims for outer knitted clothing.

Braid pattern:

Tangle braid:

Pattern diagram:

The diagram shows both front and back rows. We read the front (odd rows) from right to left, the purl (even rows) we read from left to right.

Pattern repeat 12 loops + 3+3 +2 edge loops.

Symbols for the diagram:

front (front - in the front rows, purl - in the back rows)

Cross 6 loops to the right (leave 3 loops on the auxiliary needle and leave BEHIND the work, knit 1 purl, 1 knit, 1 purl, then knit 3 loops on the auxiliary needle)

Cross 6 loops to the left (slip 3 loops onto an auxiliary needle and leave BEFORE working, then knit 3 knit stitches, then knit loops with an auxiliary needle as follows: k1, p1, k1).

Braid Medallion:

The number of loops is more than 13, on the purl stitch.

Knitting row 1: (front side) knit 4, repeat 3 times, knit 3;
Knitting 2 rows: purl 3, repeat 4 times, purl 2;
Knitting 3 and 4 rows: similar to the 1st and 2nd row;
Knitting 5 rows: C6F (put 3 loops on the knitting needle for the “braid” before work, knit the next 3 loops, then knit 3 loops from the knitting needle for the “braid”), 1 knit, C6B (put 3 loops on the knitting needle for the “braid” "at work, knit the next 3 loops, then knit 3 loops from the knitting needle for the braid);
Knitting 6 rows: knit purl;
Knitting row 7: knit;
from 8 to 11 rows: repeat the 6th and 7th rows 2 times;
Knitting row 12: knit purl;
Knitting 13 rows: C6B (put 3 loops on the knitting needle for the “braid” at work, knit the next 3 loops, then knit 3 loops from the knitting needle for the “braid”), 1 knit, C6F (put 3 loops on the knitting needle for the “braid” "before work, knit the next 3 loops, then knit 3 loops from the knitting needle for the braid);
Knitting row 14: similar to row 2;
Knitting row 15: similar to row 1;
Knitting row 16: similar to row 2;
Rows 1 to 16 form a pattern.

Scheme of a braid with a knot element:

The number of loops is a multiple of 20 + 2 + 2 chrome.

Row 1: * P2, K1, P1, K1, P1, K1, P1, K1, P3, K8, repeat from * , 2 p.

2nd r. and all even rows: knit loops according to the pattern.

Row 3: * P3, K1, P1, K1, P1, K1, P1, K1, P2, K8, repeat from * , 2 p.

5th and 9th r.: knit as 1st r.

7th row: knit as 3rd row.

11th row: * P2, k8, p2, cross 8 sts to the right (leave 4 sts on the auxiliary needle while working, k4 and knit stitches with the auxiliary knitting needle), repeat from *, purl 2.

13th, 15th, 17th and 19th days:* P2, k8, repeat from *, P2.

Row 21: * P2, cross 8 stitches to the right, P3, K1, P1, K1, P1, K1, P1, K1, repeat from *, 2 p.

Row 23: * P2, K8, P2, K1, P1, K1, P1, K1, P1, K1. P1, repeat from *, P2.

Row 25: * P2, K8, P3, K1, P1, K1, P1, K1, P1, K1, repeat from * , 2 p.

27th row: knit as 23rd row.

29th r.: knit as 25th r.

Repeat from 1st to 30th r.

Volumetric braid with knitting needles

Braid pattern:

The pattern with voluminous braids consists of 42 loops. Work rows from 1-30 once then repeat from 7-30. Knit knit and purl according to the pattern. Knit from right to left, purl from left to right.

Braid with pearl pattern

Cast on 17 stitches + 2 edges and knit according to the pattern on which the stitches are shown. R.

The numbers on the right show individuals. r., left - purl. R.

Pattern repeat = 16 stitches wide.

Original braid with knitting needles

Crossing 2*2 to the right: remove 2 loops on an additional knitting needle, leave them at work, knit 2 knits. from the left knitting needle, then k2. with an additional knitting needle.
Crossing 2*2 to the left: remove 2 loops on an additional knitting needle, leave them before work, knit 2 knits. from the left knitting needle, then k2. with an additional knitting needle.

How to knit braids: cast on stitches in multiples of 20 + 12 stitches.
1st row (front side): P2, K8, P2, *(K1, P1) - 3 times, K2, P2, K8, P2 ., repeat from *.
2nd row: k2, p8, k2, *(p1, k1) - 3 times, p2, k2, p8, k2, repeat from * .
Rows 3, 5, 7: repeat row 1.
Rows 4, 6, 8: repeat row 2. 9th row: P2, cross 2*2 to the right, cross 2*2 to the left, P2, repeat from *.
10th row: k2, (p1, k1) - 3 times, p2, k2, *p8, k2, (p1, k1) - 3 times, purl 2, knit 2, repeat from *.
11th row: P2, (K1, P1) - 3 times, K2, P2, *K8, P2, (K1, P1) - 3 times, k2, p2, repeat from *.
Rows 12, 14, 16, 18: repeat row 10.
Rows 13, 15, 17: repeat row 11.
19th row: repeat 9th row.
20th row: repeat 2nd row.

Braid in the middle with a twist:

Braid pattern:

How to knit braids with knitting needles

If we talk about patterns, those that look like braids look very beautiful. This pattern can suit children, women, and even men. The braid pattern can look great on any item. Moreover, such a pattern can freely go with a combination of other various patterns. In order to learn, you will need a little patience and skill, special knitting needles and a few secrets to create this masterpiece.

How to knit braids with knitting needles for beginners

Before you start knitting a pattern in which the main element is a braid, you need to know the following things. So, how to knit braids for beginners with your own hands:

How to knit a double braid

Among all the patterns, a double braid with knitting needles is the simplest element in terms of complexity of execution. This braid consists of two weaves. The pattern itself can be changed, the braid made narrower, the distance between the main patterns reduced or increased. Here are some examples that show how to knit a double braid using knitting needles.

Simple double braid

Simple double braid

In this pattern, all cast-on loops should be divided by 12, not counting two edge and three symmetry loops. For drawing, choose in advance. The first couple of rows are done in order to form the initial appearance of the pattern, after which the weaves themselves begin to be knitted. All work can be divided according to the following scheme:

• in rows 1 and 5, the loops need to be knitted in the following sequence: three knit, three purl, and at the end of the row there should be 3 loops left, they are knitted like three purl.
• the second row begins with the fact that all the rows are on the wrong side or even, you need to knit according to the following pattern in the figure: under the knit ones - the knit ones, and the purl ones under the purl ones.
• in the third row, weaving is done with an inclination to the left, so that an additional knitting needle should always be in front of the work. Knitting should be done in this way: purl 3, knit 3, then three stitches are removed onto the auxiliary needle and the next ones must be knit purl again. Next, the removed stitches need to be returned to knitting and knitted. At the end of the row you need to finish everything with three purl loops.
• The 7th row is performed by weaving with an inclination to the right side, do not forget about the auxiliary knitting needle. The sequence of stitches for knitting will be as follows: 3 purl stitches, three are removed on an additional knitting needle, the next three stitches are knitted with knit stitches, then again you need to pick up the knitted loops and knit them purlwise, then there are 3 knit stitches. The row ends with three purls.
• 9 and the following rows are knitted in the same way as from the first row.

Braid pattern pattern

Using the video below, you can familiarize yourself with a more detailed knitting pattern and see how a double-sided braid is knitted with knitting needles:

The braid patterns presented above turned out to be quite voluminous. Below you can see another example of knitting voluminous braids. This time, using a different combination of purl and knit stitches, in which the knit stitches predominate, the pattern comes out more prominent.

Relief braid

• this time the number of loops is taken as a multiple, 11 + 4 loops for edge and symmetry.
• The 1st and 3rd, 7th and 9th rows need to be knitted like this: 2 purl loops, 9 knit stitches. At the end of the row you need to knit two purl stitches for symmetry.
• if the rows are odd, then knit stitches are knitted at the beginning of the row, then knit stitches are made under the knit stitches, and purl stitches are made under the purl stitches.
• The weave of the braid is formed precisely in the fifth row and the row is knitted in this way: 2 purl, 3 loops are thrown onto a secondary knitting needle, while you need to leave it under the fabric. Then the next three are knitted with knit stitches, then the thrown stitches are knitted with purl stitches, and the three that remain are knitted with knit stitches. The row ends on two purl stitches.
• The eleventh row is knitted according to the following pattern: 2 purl loops, three knit stitches, then there are three loops that are thrown onto an additional knitting needle. The next three are purl, then we return the loops that were removed and knit them. At the end of the row you get two knit stitches.

Braid scheme

How to knit wide or triple braids correctly

You can use a wide or triple braid for women’s, cardigans, etc. An example of such a pattern is a pattern called “royal braid.”

Royal braid

In order to create such a pattern, you need to take the surface of their purl or front loops as a base. The number for the braid must be a multiple of 30. In order to create this pattern, you must do the following:

• 1r. All stitches are knitted
• from the second row, all purl rows must be knitted with purl loops.
• 3 rub. The loops are knitted in the following sequence: five loops are removed unknitted and transferred to an auxiliary knitting needle. The knitting needle must be left in front of the canvas. The next five loops are knit stitches, then the removed loops are knitted with knit stitches, then 10 knit stitches and again 5 loops are removed onto an auxiliary knitting needle, leaving them to work on. Next, as soon as the next five are knitted, the loops from the auxiliary needle are knitted with knits.
• the next rows 5 and 7 are knitted with facial loops.
• The ninth row should be knitted like this: knit five stitches of the braid, slip five onto a secondary needle and leave behind the fabric. Next, five knit stitches, the removed stitches are knitted with knit stitches, then again 5 stitches are thrown onto an auxiliary needle, but at the same time you leave them before work. Then knit 5 stitches, knit 5 retaken stitches, and then knit five stitches from the main needle.
• Row 11 is knitted with knit stitches
• knitting is repeated from the first row when the 13th row begins.

Scythe diagram

From the very beginning, it may seem that knitting a braid with knitting needles is a very difficult and overwhelming task. But in reality this is all untrue. You just need to get used to it, be patient and understand the specifics of creating this pattern. After this, any type of drawing will seem easy.

Beginning craftswomen, when planning to knit something, usually choose simpler patterns. And this is right - having honed your skills on simple patterns, you can begin to work on more labor-intensive, but beautiful designs. From this kind of abundance we can distinguish simple “braids” or “harnesses”, which are basically the same thing. The only difference is in the knitting technique: braids are one overlap of certain loops, and plaits are a whole system of overlaps folded into one complete pattern. But since the technique for performing them is similar, they are therefore combined into one type. Both subspecies will be discussed later in the article.

"Braids"

Knitting with knitting needles is not a difficult task, it will just be a little awkward to do at first. To knit them, you will need additional knitting needles or pins - you will need to remove the loops on them before crossing them. The movement of the loops in the pattern can be to the right or to the left - it depends on the pattern that is knitted on the fabric. When using braids to decorate shelves, a certain symmetry in the intersection of loops should be observed.

Simple "braid"

To knit a simple “braid” you will need to separate 8 loops on the main fabric - the number of loops can be changed, but you should take into account that the cross does not lead to the formation of a hole and the corresponding assembly of the fabric. To knit a sample, you will need to cast on 14 loops, 8 of which are the “braid” itself, 4 loops are needed to highlight it, and 2 are edge loops. Next, the sample is knitted in the following sequence:
1. First row: edge, 2 purl, 8 knit, 2 purl and edge.
2. Knit rows 2, 3 and 4 according to the pattern.
3. Fifth row: edge, 2 purl, remove 4 pieces onto a pin or auxiliary knitting needle, without knitting and holding before work, knit the next 4 loops, transfer the loops from the pin to the left knitting needle and knit, it turns out to be crossed to the left. Picking up stitches on a pin or auxiliary needle and leaving them behind the fabric leads to the formation of a crossing to the right side. Complete the row with two purls and an edge stitch.
4. From the 6th to the 12th row you should knit the way the knitting looks, and then cross the loops as in the fifth row.
The considered pattern is suitable for making any thing. You can make “braids” in a row on the canvas - it will look very beautiful. The same pattern looks good on hats, sweaters, vests, scarves and other things, both for children and adults.

Simple double braid

This pattern consists of two weaves, but they are not at all difficult to make. In it you can change the number of loops in the weaves, the distance between the “braids” and it is possible to “dilute” with other relief patterns. To complete the pattern, you need to cast on so many loops so that their sum is a multiple of 12, add three loops to them for symmetry and two edge loops. In the example discussed below, you should cast on 17 loops.

Knitting must be done in accordance with the following pattern:
1. Rows 1 and 5 are knitted in the sequence - edge, knit 3, purl 3, complete the strip with purl 3 and edge.
2. The second row and all the reverse rows are knitted according to the pattern.
3. In the third row, you need to cross to the left side, in the manner described below - remove the edge, make three purl, then three knit, slip the next three loops onto a pin, and purl the three following them, return the loops from the pin and make their faces. Finish the strip with three purls and an edge stitch.
4. In the 7th row you need to cross to the right side. Perform in sequence - edge stitch, 3 purl stitches, slip the next 3 pieces onto a pin, knit 3, return the loops from the pin and purl them, knit 3, purl 3 and edge stitch.
Starting from the 9th row, repeat the pattern from the beginning of the rapport.
Based on “harnesses” and “braids”, more complex patterns are created, for example, “braiding”. Gradually gaining experience, any craftswoman can master this. Making complex designs on products makes them stylish and unique, emphasizing their individuality and beauty.

"Tourniquets"

This pattern is the crossing of one or more loops against the background of the main fabric. “Braids” are made using the same principle, only in this case the number of loops is taken from 3 to 12. From this series there will also be “aranas”, which are made by interlacing cord compositions and are similar to the weave of baskets, braids and fabrics.
For inexperienced needlewomen, you can master the patterns of knitting “harnesses”, starting with the simplest ones.

Harness pattern - vertical stripes

The presented pattern is easy to perform - only 4 loops are used and then crossed. The stripes are embossed and quite expressive, as a result of which they can be used in any product. The pattern is especially good when made from thick yarn.
To complete the example on knitting needles, you need to cast on a number of loops that are a multiple of 6 and add 2 loops to them so that the pattern is symmetrical, and two edge loops. For example, it will be 34 pieces. Next knit following the sequence:
1. First row: edge, knit 2, then repeat - purl 4, knit 2 - do this until the end, knit the edge purl.
2. Second row: purl 2, then cross two loops to the right, for which you knit the second loop, stretching it in front of the first, and then knit the first. Cross the next loops to the left: knit the second loop behind the first, and then knit the first. Finish the row with two purls and an edge stitch.
3. Third row: repeat the pattern starting from the first row.
It is necessary to take into account that the pattern itself is formed on the reverse side - watch the placement of the front and back sides when casting on loops and subsequent knitting.

"Harness the Barrel"

A simple pattern that does not require effort, suitable for creating any thing. To complete the pattern given in the example, you need to cast on a number of loops that is a multiple of 5, add one for the symmetry of the pattern and 3 edge stitches. Let it be 33 pieces, which are knitted in the following sequence:
1. Knit rows 1, 5, 7, 9 in the sequence - edge, purl, then repeat - knit 4, purl, final edge.
2. Even stripes are knitted the way the knitting looks.
3. Third row: edge, purl and rapport - cross 4 loops to the left, remove the first loop on a pin, holding it before work, then knit 3 front loops and only then one removed from the pin. Finish the purl and edge row.
4. Knit the pattern up to the tenth row, taking into account the instructions presented above, from the 11th row, perform the pattern from the beginning.
There are a lot of types of braids and harnesses - those presented in the article are the simplest. To create knitting patterns with braids and plaits, you can learn more in the video knitting lessons. A video and a selection of schemes for realizing your fantasy are presented later in the article.
Goats and plaits turn out to be not so difficult to perform, but rather labor-intensive in counting loops and making overlaps - this is difficult for beginners to do. For dexterity, it is advisable to use simple braids, but in the future you can take on more complex variations.

It is quite difficult for many beginning needlewomen to understand the principle of knitting braids, so to make it easier to master this process, you need to remember a few recommendations.

Tip #1. Use special knitting needles for knitting braids and plaits. They have a curved shape and sharp ends. On the curved section of the knitting needles, those loops that need to be intercepted are often located. The material from which such knitting needles are made can be very different, but it is best to choose plastic knitting needles, since the thread glides better over their surface.

The sharp tips of the knitting needle help you quickly hook the stitches onto the main knitting needle. In addition, such knitting needles can be placed either in front or behind the fabric. At the moment when they need knitting, they can simply be moved to the working needle without returning to the main needle.

Also, a round pin or a special knitting needle with a tip is often used as an auxiliary knitting needle.

Experienced needlewomen can do without such special knitting needles, since they knit loops with interceptions using ordinary knitting needles. It will be easier for beginners to master this pattern with such auxiliary tools.

Tip #2. The width of the auxiliary knitting needle should be smaller than that of the main one. To make the pattern on the knitting fabric textured and voluminous, the loops for the braids must be smaller in size and high in density.

Tip #3. The size of the braid depends not only on the number of loops initially cast on, but also on the thickness of the threads.

The thicker the yarn, the wider the pattern will be. To create a narrow braid, thin threads are suitable.

Tip #4. To obtain the required size, you need to add the number of loops per braid to the total number for the entire product. This is worth doing in order to know how much the knitted product will stretch during wear. The type of yarn also plays an important role.

Tip #5. We follow the direction of the additional knitting needle, which can be either in front or behind the fabric. It is worth remembering a simple rule: if the auxiliary knitting needle is located at the back of the fabric, then the braid will cross to the right side.

If the auxiliary knitting needle is in front of the fabric, then the pigtail will be formed to the left.

What are the differences in knitting purl stitches for a braid pattern?

Experienced needlewomen may have often noticed that when too many stitches are cast in a fabric with braids, then in the process of switching from knit to purl loops, the last knit stitch turns out to be too wide. The same picture is observed in the process of transition from purl stitches to facial ones. This loop seems to split into two halves. What is the reason?

It is quite easy to expose such a small nuance, since the size of this loop directly depends on the method of knitting the purl loops that surround it. How to get rid of it?

To ensure that all the loops are the same size and do not stick out from the overall picture of the pattern, you need to remember that the last purl loop must always be knitted using the classical method. This loop is the very last in the block of purl loops, and after that the front loop does not immediately begin.

In this case, the front loops can be knitted as needed, either in front of the front or behind the back wall of the loop. The first stitch in the purl stitch block, which comes after the knit stitch block, is always knitted using the granny method.

From the wrong side of the fabric, facial loops can be knitted using the usual method, as convenient. It is worth remembering that the last loop covering the front block must be knitted behind the back wall of the loop. But this does not apply to the last loop, which closes the row. In a purl knit stitch block, the first knit stitch should be worked along the front wall, but this again does not apply to the first stitch that begins the row. Simply put, the knitting of the last and first stitch in any row will automatically depend on the technique of knitting the last and first loop in the previous row.

Learning to knit the simplest double braid

The double braid is considered one of the simplest and most understandable, as it is knitted using only two crossings. The width, distance between patterns and volume can be changed at your discretion, but the knitting principle remains the same.

Description of work

First, you need to cast on a number of loops that would be a multiple of 12, that is, the initial number should be divided by 12. In addition to the main loops, you need to add 2 edge loops and 3 loops to make the fabric symmetrical. The first two rows are knitted in order to get a clear pattern.

Rows 1 and 5 should be knitted as follows: *3 knit stitches, 3 purl stitches*. You need to close each of these rows with three purl stitches.

All 2,4,6,8,10 and 12 rows of the wrong side must be knitted according to the pattern. All knits are called knit, and purls are called purl.

The 3rd row will begin the formation of the braid weave itself on the canvas. The crossing is done to the left. At this stage, you need to ensure that the auxiliary knitting needle lies in front of the canvas at this moment. Knitting pattern for 3 rows: three purl loops, 3 knit stitches, remove three loops on an additional knitting needle, continue knitting the rest with purl stitches. The removed stitches then need to be returned to knitting, while knitting them. Close this row also with 3 purl stitches.

The fourth, fifth and sixth rows are knitted according to the pattern.

In the seventh row, another crossing of loops will begin, but only to the right side. Therefore, you need to start it with 3 purl loops, remove three loops on an additional knitting needle, 3 knit stitches, purl the next loops, 3 knit stitches. Close the seventh row with 3 purl loops.

Subsequent rows are knitted in the same way.

Making a voluminous and embossed braid

For this braid, you need to cast on so many loops, the number of which would be a multiple of 11. Also, do not forget about 4 edge loops and loops for symmetry.

Odd rows (1,3,7,9) are knitted in the following order: *purl 2, knit 9*. These rows need to be closed with two purl loops in order to create symmetry between the fabric and the pattern.

The crossing of the braids begins only in the fifth row. To do this, you need to knit 2 purl loops, remove 3 loops on an additional knitting needle. At this moment, you need to control the location of the additional knitting needle; it must be left behind the canvas. The next 3 loops are knitted, the loops removed on the auxiliary needle are knitted again purl, continue with 3 knits. Close row 5 with two purl stitches.

The 11th row begins the formation of another crossing of the braid, so it is knitted like this: 2 purl, 3 knit, 3 loops are removed on an auxiliary needle, 3 purl, removed loops are knitted. Close the row with two knit stitches.

Learning to knit triple (royal) braids

Similar patterns are often used for knitting men's sweaters, women's pullovers and hats. This braid option is suitable for decorating outerwear, such as a warm cape or cardigan. This pattern is complicated, so before knitting it is better to describe in detail the knitting of each row separately.

First, you need to remember that the number of stitches cast on must be a multiple of 30. The background for this pattern is satin stitch. All you have to do is choose the type of loops that will form the background of the canvas.

Description of work

Row 1 is performed with knit stitches. Row 2 knit purl rows only with purl stitches. In row 3, the crossing of the braid will begin. Sketchy knitting row 3: slip 5 stitches onto an additional knitting needle, which is placed before work. After moving the stitches, the next 5 are knitted. Knit the removed stitches, knit the next 10 stitches. Slip 5 stitches onto an additional needle and leave behind the fabric. Knit the next 5 stitches with knit stitches.

The fifth and seventh rows are performed only with facial loops.

The order of loops for the 9th row: knit 5, slip 5 loops onto an auxiliary knitting needle (leave at the back of the work), knit 5, knit 5 removed loops, knit 5 onto an additional knitting needle (leave at the front of the work), knit 5, knit 5 removed, 5 facial

Row 11 is knitted only with knit stitches. Repeat the knitting sequence as soon as the 13th row begins. Repeat the pattern from row 1.

Knitting a chain braid

This pattern perfectly decorates both women's and men's knitwear. It is distinguished by the presence of two sides, so the knitting for the front and back sides will be different.

First row (face): purl 2, knit 8, purl 2.

Second row (wrong side): knit 2, purl 8, knit 2.

Third row (face): purl 2, move 2 loops to the auxiliary needle (leave at the back of the fabric), knit 2, knit the removed 2 loops (crossing to the right side), move 2 loops to the auxiliary needle (leave at the front of the fabric), knit 2 , removed with 2 knit stitches (crossing to the left), 2 purl stitches.

Fourth row (wrong side): knit 2, purl 8, knit 2.

Fifth row (face): purl 2, knit 8, purl 2.

Sixth row (wrong side): knit 2, purl 8, knit 2.

Seventh row (face): purl 2, move 2 loops to the auxiliary needle (leave in front of the fabric), knit 2, knit the removed 2 loops (crossing to the left), move 2 loops to the auxiliary needle (leave at the back of the fabric), knit 2 , removed 2 loops knit (crossing to the right side), 2 purl.