How to determine finger size at home. Six ways to help determine your ring size

The ring size refers to the diameter of its inner part; the indicators are determined in millimeters. Often the need arises to measure the size of a finger for a ring in the same size. You can carry out manipulations at home using several popular methods. Let's take a look at them!

Ways to measure finger size for a ring

If we consider the diameter according to the standard series, it varies between 15-24 mm. Step - 0.5 mm. Women typically have sizes of 16-18.5 mm. The male half of the population has larger fingers, so they have all other sizes. Let's look at how to find out the finger size for a ring. All methods are ideal for implementation at home.

Method number 1. Ruler

1. You need a triangle ruler, which usually has round holes of varying sizes.

2. Try inserting your finger into each circle one by one, choosing your size. You don't need to push the phalanges in too much.

3. When you find in which hole your finger feels most comfortable, all that remains is to measure the diameter of this circle.

Method number 2. Clothing size

1. There are many ways to determine your ring size. All you need to do is find out your clothing size at home. Then you won't have to go to the jewelry store.

2. This technique gives only an approximate result. Accuracy cannot be guaranteed because everyone's body shape and body type are different.

3. So, size “S” corresponds to a ring size of 15.5-16.5 mm. If you wear "M" clothing, the finger size will be about 16.5-17.5mm, "L" is 17.5-18.5mm, "XL" is 18.5-19.5mm.

Method No. 3. A piece of paper

1. Since you can measure the finger size for a ring using a primitive method at home, let’s use it. The method is accurate, so it makes sense to consider it.

2. Cut a long strip of leaf about 1 cm wide. Wrap it around your finger in the place where the ring is usually located. Make a mark with a pen where the beginning and end of the segment coincide.

3. Now measure the resulting value with a ruler, then divide it by 3.14 using a calculator. This is how you get your finger size.

Method number 4. A thread

1. The principle is simple. You need to find out what size your finger is when girthed, then the diameter of the ring is calculated directly.

2. To take measurements, prepare scissors, a ruler, a felt-tip pen, a calculator, and a thick thread (it should not stretch).

3. Wrap the thread around your finger in the place where the ring is usually located. Mark the area where the two edges of the thread meet with a felt-tip pen and cut.

4. Attach the segment to the ruler, divide by 3.14 (the “Pi” value). You will receive an indicator corresponding to your size.

Method No. 5. Jewelry shop

1. When thinking about how to measure your finger size for a ring, it would be a good idea to visit your nearest jewelry boutique or workshop. In such places people will be happy to help you.

2. At home, there may be inaccuracies, which cannot be said about such establishments. The master will determine and tell you everything you need to know.

3. If you often order jewelry through an online store, it is recommended to purchase a professional device - a finger gauge.

4. Websites that sell such products can offer you the most ordinary (plastic) finger gauges for only 150-200 rubles. This is a one-time required purchase.

Method number 6. Another ring

1. How to determine the ring size for your finger? It’s very simple, just take the second piece of jewelry from the box and try it on. A classic decoration can be outlined on a piece of paper at home.

2. If the product does not have any fancy shape, the procedure is quite simple. Measure the outlined diameter and you will get the desired value.

3. If the ring has a complex shape, try to use a ruler. You want the inner spacing to be the maximum width. This simple method will help with this pressing issue.

Method No. 7. Finger width

1. The method is considered practically the most effective. Use a blank album sheet. Place your palm on it.

2. Outline the desired finger on both sides in the place intended for the ring. It is enough to measure the distance between the marks.

3. You will need the resulting value. Keep in mind that you need to outline your finger with a thin pen, holding it vertically. Errors are unacceptable.

To understand how to correctly measure your finger size for a ring, it is important to consider the width of the jewelry. This feature determines exactly how to round the final result at home.

1. If the ring has a small width, then the value is rounded down. We do the same with a wide ring, only the rounding will be to a larger value.

2. When measuring a finger, the procedure should be carried out several times a day. Depending on the time of day, the phalanges may have different volumes. You will need the value measured in the middle of the day.

3. It is prohibited to take measurements after intense exercise, drinking large amounts of liquid, or during illness. The temperature also affects the measurement; it should be 22-24 degrees.

To take measurements, you should use cunning methods. For more accurate results, be sure to consider some factors and possible errors. To avoid problems in the future, purchase the simplest finger gauge.

Do you want to buy a ring but don't know what size will suit you?

Below are ways that will allow you to quickly and reliably find out the ring size you need.

The easiest way to find out what ring size you need for a particular finger is to go to your nearest jewelry store and ask them to measure your finger. Any jewelry store has special patterns for determining the size of fingers.
If you don’t have time to go to a jewelry store, then you can determine the size of your finger and, accordingly, the ring that will suit you, at home. There are many ways to do this. Here are some of the most interesting of them.

Determining ring size using thread

You will need: a fairly dense thread (threads that are used for knitting napkins are ideal), preferably cotton, smooth. Approximately 50 cm - to make it convenient to take measurements.

Step 1.
Take the thread, carefully wind 5 turns on the finger you need (the width of the “winding” of all 5 turns should be approximately 3-6 mm). There is no need to wind it tightly, but the thread should still be pressed tightly against your finger.

Step 2.
After wrapping your finger, cross both ends of the thread (without lifting it from your finger) and use sharp scissors to cut them at the same time. Or simply mark the intersection of the ends of the thread with a pen or marker, unwind the thread and cut it according to the marks.

Step 3.
Use a ruler, tape measure, or tape measure to measure the length of the thread you cut. Divide the resulting length in millimeters by 15.7. The resulting value is the finger ring size you measured.
The resulting size must be rounded up to half a millimeter. For example, 17.1 to 17.5.

Determining ring size nabout the table

Step 1.
Take a strip of paper approximately 1-1.5 cm wide and wrap it around your finger.

Step 2.
Mark where the strip intersects. Remember, the ring must go through the joint, so try running the folded strip along the entire length of your finger.

Step 3.
Measure the resulting length with a ruler - this is the circumference - and select the appropriate size using the table below.

Size(mm)	Diameter (mm)	Ring size
47.63	15.27	15,5
50.80	16.10	16,0
52.39	16.51	16,5
53.98	16.92	17,0
55.56 - 57.15	17.35 - 17.75	17,5
58.74	18.19	18,0
60.33	18.53	18,5
61.91	18.89	19,0
63.50	19.41	19,5
65.09	19.84	20,0
66.68 - 68.26	20.20 - 20.68	20,5
69.85	21.08
71.44 - 73.03	21.49 - 21.89	21,5
74.61	22.33

How to buy a silver or other ring in the FREY online store

INYou will find a variety of exquisite rings made from silver and high-quality jewelry alloys.

We have amazing silver rings with amethyst, citrine, topaz for your choice.A stylish collection from Israel has been selected especially for you - rings with opal, garnet, agate, topaz and pearls. EThere are also rings with cubic zirconia. buy from ussilver rings and rings. The purchase will not be difficult, because... We describe each ring in detail, its size, composition and weight, and also provide other detailed information about the jewelry. Rings or other jewelry purchased from us are delivered either.

Your FREYA

Most women and men wear wedding rings as a sign of fidelity to each other, simple rings as jewelry. But when faced with a choice for the first time, many do not know the required volume. Any jewelry store will provide you with the service of determining the diameter of your finger, but there are cases when you need to know the size in advance. In this case, the question arises: how to determine the ring size at home?

What is ring size

The ring size refers to its diameter, i.e. the distance between two opposite points on the hole's circumference. Look clearly at the photo below.

To determine the diameter of a piece of jewelry at home, there are a few things to consider:

Throughout the day, the volume of the fingers changes slightly. Noon is the best time to determine the volume. In the morning, my hands are still swollen due to the water accumulated during the night.
Do not measure after playing sports, at high room temperatures, or immediately after a cool street.
It is worth considering that independent measurements will not have high accuracy. This will be an approximate/guideline size.

When choosing jewelry for the ring finger of your right hand, be aware that it may not be the right size for your left hand. If you were given a piece of jewelry that is not the right size, then contact a jeweler and he will roll it out (increase the diameter a little).

How to determine ring size using a table at home

Let's look at two ways to determine the ring size yourself at home using a table. To do this, you will need to prepare a small piece of thick paper, a pen, a ruler, half a meter of thread (knitting thread is ideal in thickness), and scissors. In addition to plain paper, a checkered piece of paper works well. When taking home measurements, keep in mind that the ring should pass freely through the joint (phalanx).

Using a strip of paper

First way. Cut a strip from the sheet one to one and a half centimeters wide and up to five centimeters long. Wrap it around the finger you need. Place a mark with a pen where the end of the strip meets. Unfold the paper and use a ruler to measure the distance from the edge to your mark. The length found is the girth; to find the cross section, you need to divide this value by the number 3.14. The size is determined by finding the diameter equal to the table.

Second way. This option is perfect for men who want to put such a gift on the finger of their beloved girlfriend, having with them another one that matches the inner contour. Take the ring and attach it to the sheet, trace its outline with a pen and a thin marker inside at the base. Find the diameter from the resulting circle. Typically, the difference between sizes is half a centimeter.

Advice: it is worth rounding the result to a smaller value for narrow rings, to a larger value for wide rings.

Using thread

For this home method, take a thick thread (tape), wrap five turns a little tightly and carefully around the selected finger (the width of the winding should not be more than six millimeters). Don't wrap it too tightly. Cross both ends without tearing them away from the coils, cut them off with scissors at the intersection. Or, with a pen, mark the intersection of the ends of the thread, unwind it, and cut it at the marked places. Measure the resulting piece of thread with a ruler.

And in order to determine your individual size at home, you should divide the value obtained from the measurement by a special number 15.7. The result must be rounded.

International table

Video: How to make a ring size template at home using coins

Some sites offer templates ready for printing on a printer. But when copying or printing the pattern, the image will be slightly distorted. Therefore, it is better to make a template with your own hands at home.

Watch the video to learn how to make a template for the sizes of the required rings yourself at home:

As you can see, the conditions provided at home allow you to determine the right size for your ring. These methods are not only easy to use, but will also take you a small amount of time.

If you know other simple, interesting and effective ways to determine the size of a ring at home, then leave your comments. They will be useful for other readers.

Christina Tsurtsumiya

2015-02-12 12:00:00

Sooner or later, the moment comes when a man decides to end his bachelor life and propose to his girlfriend. The main difficulty faced by representatives of the stronger sex is not the marriage proposal scenario at all, but the size of the ring. You need to find out it as accurately as possible without giving away a surprise.

We present to you some simple ways to find out your ring size so that she doesn’t suspect anything.

Method number 1: agent 007

One of the most accurate ways is to discreetly take the ring from the girl that she wears on her ring finger.

When it works: If you have access to your girlfriend's jewelry box, where she keeps several rings that she constantly changes. This way, your beloved will not have time to notice that it’s missing until you return the trophy to its place.

Don't miss! It is necessary to take exactly the jewelry that she wears on her ring finger. In order not to get confused at the sight of sparkling products that, in your opinion, are similar to each other and to accurately identify the “victim,” watch your girlfriend for a while. Then you will definitely remember the right ring.

Action plan: Learn from good old Bond: the main thing is clarity and speed of action. Take the ring to the nearest jewelry store, where the seller can easily determine the size using a ring gauge.

Then discreetly return the jewelry to its owner. And - mission completed.

Method number 2: without noise and dust

Another proven method is to take measurements yourself, as they say, at the crime scene.

When it works: If a girl won’t part with her favorite ring, and it’s not possible to “steal” it, you’ll have to act in the field.

The hardest thing is to be in the right place at the right time. If she takes off her jewelry before going to bed, washing dishes, cooking or other household chores, don't miss the moment!

Otherwise, you will have to create “favorable conditions” yourself.

Action plan: When the girl leaves the room, place the ring on a piece of paper and trace it along the inner (!) contour. The diameter of the resulting circle, measured in millimeters, will be the size of the ring. However, you can go to the store directly with the drawing.

If you are not good at geometry or simply don't trust your artistic abilities, leave the imprint of the ring on some plastic material, such as plasticine.

To prevent your plan from failing, stock up on everything you need in advance. And don't forget to get rid of the evidence.

Method number 3: measure seven times

A quick and reliable way is to try on the ring yourself.

When it will work: In the case when the treasured decoration is unattended, but time is limited, and there is a threat that your insidious plan will be revealed. Or simply not at hand

turned out to be the necessary “tools”. And also if you trust your visual memory.

Action plan: Put the ring on any finger and remember the level to which it fits (to be sure, you can make a mark with a pen). In this case, the decoration should fit most comfortably.

To avoid arousing suspicion, bandage the finger with the mark or cover it with an adhesive plaster.

Method number 4: reconnaissance in force

You can try to find out the size from the girl herself. True, as a real intelligence officer, you will have to lull her vigilance and show miracles of conspiracy.

When it works: This method is suitable if your girlfriend likes to take psychological tests like those printed in glossy magazines.

Action plan: Find some kind of compatibility test (for example, “Find out if you are right for each other”) and adjust it by including the desired question in the questionnaire. It is advisable that you answer the questions separately and then compare the answers. This is the only way you can find out the necessary data.

Keep in mind one “but”: a girl may suspect that something is “off” if up to this point you answered all her offers to take such tests: “What nonsense!”

Method number 5: joint creativity

Show your imagination and immortalize your love. And at the same time, find out the right size.

When it will work: If you are a lover of unusual surprises and crazy ideas and often spoil your other half with your inventions. Agree, receiving such an offer from a serious business person is at least strange.

Action plan: Invite your loved one to make a joint handprint on art clay or other materials that are now fashionable. Paper and bright gouache are also suitable for this.

By combining business with pleasure, you will have a great time with your beloved and, in addition, you will find out the size of her finger. Perhaps the most difficult thing is to get the resulting art.

Method number 6: glove

Don’t despair if all the previous methods don’t work for some reason, or if your girlfriend doesn’t wear rings. Remember Cinderella's glass slipper? The principle is the same, only instead of a shoe there is a favorite glove.

When it works: When the gloves are made of thin leather. All other materials will give a strong error.

Action Plan: Once you have the “accidentally left” gloves, grab them and rush to a jewelry store where they can help you determine your ring size. As a last resort, you can ask the sellers to try on the accessory. The hand of the one that fits the gloves will become a guide when choosing a ring for the future bride.

Alexey 08/31/2019

take her ring and try it on - but what else? or choose together in the store. The process of choosing and trying on is also a pleasure. Answer

Olga 08/12/2019

The simplest option, which will not arouse suspicion, is to admire the size of your beloved’s fingers, compare them with your “huge” fingers, and finally remove the ring from her finger, put it on yours, and notice how high the ring fits. And run to the store))). Answer

Olga 07/25/2019

good tips and ideas. but the most effective and accurate way is to take her friend as an ally, who will find out the size of the ring without any suspicion))). Answer

Inna Koval 07/23/2019

There are all sorts of solutions for this. I liked the idea of having a ring around it inside. The main thing is to get a ring for this, of course. Answer

Oksana Ivanova 07/07/2019

You can send a friend to find out her size. Or mom for example. Cool tips, especially tracing the ring around the inside. Answer

The size of the ring corresponds to its inner diameter. Therefore, if you have a ring and you simply do not know its size, it is enough to measure the diameter with a ruler.

Method 2

Another option is to find out the size using the existing one. Save and print the picture and attach the decoration to the circles. The one that matches the inner diameter will tell you the size.

Aliexhelp.ru

Important: print all pictures in their original size (do not fit them into the sheet size).

Method 3

Take a thin strip of paper or regular thread. Wrap around the lower phalanx of the finger, closer to the knuckle. Act lightly, without pressing, so that the paper or thread can slide over your finger.

In the case of paper, mark the joint with a pen. Then cut the strip according to the mark.

If you are using thread, wrap it several times and then cut the resulting ring of thread.

Print the picture below and attach the workpiece to the control ruler. The length of the paper or thread should match the length of the colored strip.

zolotoyvek.ua

Method 4

That's when you'll need it. As you remember, to find the diameter (ring size), you need to divide the circumference by the number π.

How to apply this knowledge in life

Repeat the first tip from the previous method, then use a ruler to measure the length of the paper strip or thread in millimeters. Divide the resulting number by 3.14. The result or the value closest to it (in accordance with the Russian measurement system) will be the desired ring size.

If division is difficult, just check the table. On the left is the length of the thread or strip, on the right is the corresponding size. Remember to round your result to the nearest value.

Length, mm	Ring size
47,12	15
48,69	15,5
50,27	16
51,84	16,5
53,41	17
54,98	17,5
56,55	18
58,12	18,5
59,69	19
61,26	19,5
62,83	20
64,4	20,5
65,97	21

Method 5

Print the picture, cut out the blank, make a cut on it and insert the end of the ruler into it. You should get a paper ring. By adjusting it to your finger, you can find out the size.