Guard's chevrons are insignia and are sewn onto the uniform to emphasize its difference from civilian clothing. Special badges contain specific information about the company, the employee himself and his functions in the service. Private security companies (PSCs) differ from private security companies in that they independently develop their own protective clothing. Like the uniform itself, the insignia periodically needs to be replaced.

What regulates the placement of chevrons on a security guard’s uniform?

There are standard rules governing placement of chevrons on a security guard's uniform, but some private enterprises change them and are guided by their own considerations. The legislation of the Russian Federation requires each private enterprise to have a charter, and it, in turn, may contain the following rules: how to sew stripes on a security guard uniform.For those who have not noted this in their Charter, apply general principles that are advisory in nature. Enterprises that manufacture custom-made products divide them into several groups: sleeves, chest pieces, “Blood type”, back or headgear.

Correct placement of chevrons on a security guard's uniform

1. Patches are sewn onto a uniform jacket:

- in the back area; - on the right and left sleeve; - on the right and left chest pockets; - headdress.

1. First of all, the largest chevron is applied. Its length is 20-30 cm, called CHOP, attached in the back, in the upper part, 8-10 cm from the shoulder seams. Most often this is the designation of the service: “Security”, “Security Service”, “security”. If there is an image on it, it is placed in the center of the back.
2. A patch with the company name or the designation of a specific private security company is located on the right sleeve (8-10 cm from the shoulder seam). Common inscriptions include “Shift Manager”, “Security Officer”, “Duty Officer”.
3. On the left is sewn the general emblem of the Russian security services: shield and sword, logo, etc. On the left sleeve there is a chevron common to all security structures.
4. The blood type designation is placed on the right breast pocket. The employee's first and last name is on the left.
5. An emblem or inscription indicating the service is placed on the cap or cap. The correct location is above the forehead, in the center.

These rules are not strict; they must be based primarily on the CHARTER of the enterprise itself.

How to sew patches on a security guard's uniform

To place a chevron on a form, first of all, use the following types of fixation:

• Bonding with thermal film using an iron.

If there is a thermal film applied to the reverse side of the chevron, then gluing the information will be quite simple. First of all, you need to mark the place where you plan to stick the information. After this, remove the protective layer from the thermal film. Apply tightly to the application site, smoothing the product on a flat surface. Next, iron the chevron at the maximum allowed temperature. IMPORTANT! Follow the information on the product label and do not exceed the maximum permissible temperature. To avoid burning the fabric, you can use gauze or iron the chevron on the back of the product. We recommend paying special attention to the corners of the chevron. After ironing the patch for 15-20 seconds, make sure that everything is glued. Congratulations, now you know how to glue a chevron to a security guard's uniform.

• Fastening with Velcro type velcro.

In this case, everything is quite simple. To implement it, you need to fix the Velcro on the guard’s uniform and on the back of the chevron. In this case, you will be able to wear a security guard uniform not only while working. For example, by removing the identification chevrons you can use it in everyday life.

• Sewing with a stitch on a sewing machine.

This method requires knowledge of using a sewing machine. However, this method is not suitable for everyone. In this regard, a particularly popular way of placing a chevron on a guard’s uniform was and remains hand-sewn:

• Hand sewing is the easiest custom method.

It should be noted that many chevron models are produced on an adhesive basis and are quite easy to attach.

Manufacturing

The most popular manufacturing methods are embroidery, photo printing, plastisol pressing. High-quality embroidery is very popular. First of all, it is so durable that when replacing a uniform, the embroidered insignia can be altered. Embroidered models can contain inscriptions, logos, emblems, and stylish insignia. As a rule, they are ordered individually, taking into account the wishes of the customer. There can be many design options, for example, metallic chevrons, 3D pictures, luminous, with sequins and rhinestones. Plastisol chevrons are similar to the signs of the Ministry of Internal Affairs, special forces, and police. Plastisol (PVC) or polyvinyl chloride segments are applied to the cloth base using heat pressing. These durable and environmentally resistant stripes are used for large security companies. As a result, you can choose the chevron you need based on the intended method of attachment.

The generally accepted arrangement of chevrons on a security guard’s uniform is in many ways similar to that of law enforcement agencies, but it is worth considering this issue in a little more detail. In general, this is written in detail in the order of the Ministry of Justice of the Russian Federation dated 211 On approval of the description of the uniform of employees of system bodies and the rules for wearing them. Police chevrons on which side? In general, chevrons can be sewn on the sleeve, chest and back. Badges indicating a person’s membership in various units or services are sewn in the center of the pocket or on the right sleeve. In the Other career questions section, the question on which sleeve is the security chevron with coat of arms sewn on? How to properly sew chevrons onto a security guard's uniform. As we know, previously chevrons were not sewn onto the shirt on the old police uniform. Instructions on how to sew a chevron onto a military office uniform and other clothing

Sewing stripes and chevrons to the uniform of a police officer or other department is not as easy as it might seem. Chevrons Chevron is a laconic image applied to the fabric, in our case, using how to attach a patch to clothing. Security has recently become an increasingly popular service. Many people are tormented by the question of how to sew on a security guard's chevron. On the left sleeve of a casual jacket, an insulated jacket and a shirt, 6 cm below the shoulder. There are 15 options in total. For different units, the inscription, size and color may differ, but they are still sewn in one place on the left side of the chest, 1 cm above the top seam

A chevron with the Security brand name is sewn in the middle. Yes, chevrons are sewn on both dresses with long and short sleeves. Security guard chevrons and stripes are arranged differently depending on the requirements for the uniform of employees, which are usually prescribed in. Before sewing stripes and chevrons onto the uniform, you should select. The rules for wearing insignia on the uniform are established by orders of the Ministry of Internal Affairs of the Russian Federation No. 372 dated Rules for the placement of insignia The location of chevrons on the uniform of a private security company employee. Each security company introduces its own uniform and its own rules for sewing on badges.

All paraphernalia must be sewn onto uniforms using blue or black threads. Before On other types of uniforms, the chevron is sewn onto the uniform and sewn on.

Private security companies appeared in the USSR during the era of perestroika, but were officially enshrined in legislation in 1992. The activities of private security companies are regulated by the Law on Private Detective and Security Activities in the Russian Federation of March 11, 1992.

Security guard patches are very varied. Below we will tell you about them and explain how to sew them correctly. We also do machine embroidery and will make you patches according to your design!

Security chevrons

A necessary thing in every private security company is security emblems. They are required when organizing, they increase the rating of the ORR. You can't go anywhere without them!

Various symbols are used to create such emblems. State symbols of the Russian Federation are often used: the coat of arms, the flag. Sometimes elements of uniform patches are used: these can be emblems of military branches, recognizable symbols. Ancient heraldry is often used: lions and bears proudly grin from the emblem of the ChOO, symbolizing the courage and bravery of their bearers.

"Security" patch

In addition to various emblems, inscriptions are also used. The Security patch is the most popular of them. It is often embroidered with reflective threads, or threads that glow in the dark. This allows the guard to demonstrate his status even at night or in a dark room.

A large “Security” patch on the back is also a common attribute of a security guard. This patch is sewn onto a jacket or uniform. Shoulder stripes are also ordered as a set.

Private Security Form

Currently, each security organization chooses its own uniform, but this is not the case everywhere. For example, in Novosibirsk a common uniform has been introduced for all private security companies, which can only be distinguished by their chevron.

This form of private security company is modeled after other government services: the Ministry of Internal Affairs, Russian Railways and others. The correct placement of chevrons plays an important role.

On the back of the jacket there is a large “Security” patch made of yellow reflective material. On the left side of the chest there is a small “Security” badge. On the right side of the chest there is a badge with the name of the guard. On the left shoulder there is a chevron with the coat of arms of the Russian Federation and the inscription “Security”. On the right sleeve there is a CHOP chevron.

If your private security company does not have special rules for wearing a uniform, then it is better to follow the above instructions.

Security chevrons: how to sew

Many people are tormented by the question of how to sew on a security guard's chevron.

There are no such strict rules as in the army. Each private security company has its own charter, where you should look for information on how to properly sew on security guard chevrons. However, we can give some general recommendations.

CHOP chevrons usually come in three types: chest, sleeve, and back. The easiest one to distinguish is the one on the back: it is the largest. Chest and sleeve chevrons are often the same, but sometimes only the emblem is attached to the sleeve, and the surname or the inscription “Security” is attached to the chest.

So. Sew the back patch in the center of the back if it is an emblem, and if it is an inscription, closer to the top. Sew the chest patch above the pocket. The sleeve patch is sewn either over the pocket, if there is one, or so that there is 8 cm from the top of the patch to the shoulder seam.

If the location of the chevrons on a security guard’s uniform is not specified in your regulations, then you should sew them on exactly this way.

The sleeve chevron is usually attached to the left sleeve, and the blood type patch is on the left pocket.

Security emblems on hats

Not every private security uniform includes hats, but sometimes it is necessary to apply the emblem there too. Most often, caps are used, sometimes hats, even baseball caps.

In such cases, the emblem of the private security company or the inscription “Security” is located on the front of the product in the center. You can sew on a patch, or you can embroider it on the product itself.

Security patches in Prostovyshivka

Any emblem will become a patch, you just need to convert the image into stitch format. This is called layout rendering. In a special program, our designer will prescribe the settings for each stitch. This is complex work, on which the result directly depends, so the layout is paid separately and once and costs 500-2000 rubles. When you order 500 copies or more, we make it for you free of charge!

You personally approve the layout, and then we embroider a trial copy on our material. Only after the sample is approved is the entire edition embroidered. The price for application depends on the number of stitches. To make it easier for you to navigate, we have compiled a table of the approximate cost of embroidery depending on its size.

POSITION

Ouniforms for security company employees

Novosibirsk.

Uniform for guard guards at security companies in Novosibirsk.

1. COMPLETENESS OF CLOTHING UNIFORMS

The uniform for security guards working in security companies includes:

Black jacket with a zipper, with patch chest pockets with flaps with a button, and two side pockets. Yellow stripes are sewn above the chest pockets.

A blue or white long-sleeve shirt with shoulder straps, chest pockets and flaps fastened with buttons. There are two tucks on the back. The shirt is tucked into the trousers. In the summer - a short-sleeved shirt;

Black tie;

Black straight-fit trousers, with creases, two side pockets, two flaps at the back;

Black waist belt;

The boots are black.

In winter, for security guards performing service duties with access to the street - an insulated black jacket with a fur collar, with sewn yellow stripes above the chest pockets, a fur hat with a visor and the security company’s signature badge, or a knitted black cap.

2. TYPES OF CLOTHING UNIFORMS

Wearing a certain type of clothing is determined by order of the director of the security company

2.1. Summer casual No. 1

Consists of: (photo No. 1, 2)

The headdress is black with a yellow stripe above the visor with the security company’s signature badge;

Black jacket with zipper;

Tie;

Shirt with long sleeves;

Boots.

It is used when serving in warm rooms, as well as at outdoor posts in the summer. By order of the director of the security company, it is allowed to serve without a jacket.

2.2. Summer casual No. 2

Consists of: (photo no. 3)

The headdress is black with a yellow stripe above the visor, with the security company’s signature badge;

Short sleeve shirt with the top button undone, no tie;

Boots.

Used at outdoor temperatures of +20 degrees and above.

2.3. Winter

Consists of: (photo No. 4)

Black knitted hat, fur hat with a visor and the security company’s signature badge;

Insulated jacket;

Casual black jacket with zipper;

Shirt with long sleeves;

Tie;

Boots.

Applicable at outdoor temperatures + 5 degrees and below, as well as

for wearing inside cold protected areas.

3. INSIGNIA

For a casual jacket and an insulated jacket above the left pocket along its top edge rectangular stripes with the inscription “Security” are sewn on the sewn yellow stripe, above the right pocket along its top edge rectangular stripes with the inscription of the name of the security company are sewn onto the sewn yellow stripe - photo No. 5

On the shirt above the left pocket along it top edge rectangular stripes with the inscription “Security” are sewn above the right pocket along its top edge Sew on rectangular stripes with the inscription of the name of the security company - photo No. 5

On the left sleeve of the casual jacket, insulated jacket and shirt, 6 cm below the shoulder, a chevron with the brand name “Security” is sewn in the middle - photo No. 5. On the right sleeve of the casual jacket, insulated jacket and shirt, 6 cm below the shoulder, across a chevron with the private security company logo is sewn in the middle - photo No. 5. On a winter insulated jacket and a casual jacket at shoulder level (on the back), a patch with the inscription “Security” is sewn, the height of the letters is 4.0 cm. - photo No. 5

4. PROCEDURE FOR WEARING CLOTHING UNIFORMS

When performing official duties at a post, a security guard must wear clean, ironed, and prescribed uniforms. It is allowed to wear a uniform when traveling from your place of residence to a guarded facility and back.

Weapons and specials the equipment assigned to the security guard is placed on the waist belt, while:

Service pistol in a holster with a safety strap on the right side;

Handcuffs in a case behind the back;

Gas cartridge in a case to the left of the belt buckle, palm-width apart;

Rubber baton to the left of the belt buckle under the left arm.

The transition to wearing winter or summer uniforms is established by order of the director of the security company, depending on the time of year.

The work of a security guard in large populated areas has become quite widespread. Particular attention is paid to the uniform of the security guard, which gives the employee a neat appearance and distinguishes him from other people inside and outside the premises. The need for such clothing arose during the period of massive emergence of security companies. Due to wear and tear, the mold needs to be replaced periodically.

Security guard uniform requirements

For security guards' uniforms, practicality during work is important. Security company personnel serve not only indoors, but also outdoors. This process continues continuously throughout the day, in any weather. In emergency circumstances, a security officer must respond quickly. The uniform should protect against unfavorable environmental factors - wind, high or low air temperature, precipitation, and also ensure freedom of movement. The fabric used for sewing must be resistant to general types of dirt and mechanical friction, and if necessary, have a water-repellent impregnation.

Workwear for security officers includes suits - summer and winter “Strike” (jacket + trousers); shirts (long or short sleeves), ties and trousers for indoor work; headwear (hats and caps, winter and summer); jumpers, sweatshirts and T-shirts. The material for the uniform is knitwear (wool with acrylic, pan; cotton) and mixed fabrics (polyester with cotton, viscose; polyester with spandex; Oxford) fabrics. Color options include camouflage, grey, blue, light blue, brown and black. Particularly important are accessories such as stripes and chevrons, which distinguish security workers from each other.

Purpose of stripes and chevrons, their placement and methods of fixation

Chevrons and stripes on a security guard’s uniform inform people around him about his functions, personal data and the name of the company.

According to the legislation of the Russian Federation, all private companies (including security companies) operate in accordance with the charter. It determines the procedure and conditions for the functioning of the company, and may also contain requirements for the appearance of personnel, the placement of chevrons on uniforms and stripes. If such rules are not written down, it is necessary to use generally accepted recommendations.

The longest patch (up to 20 - 30 cm) is attached to the back, and the image should be in the center, and the text should be at the level of the person’s shoulder blades. The chevron is placed 8-10 cm below the shoulder seams. On the left sleeve is the name of the security company, on the right are the generally accepted emblems (the inscriptions “Security” or “Security”, an image of a sword, etc.). A patch with the employee’s surname and name is attached to the left breast pockets, and the blood type is placed on the right. This arrangement of stripes and chevrons on security guards’ clothing is advisory in nature.

Inscriptions and images for chevrons or stripes are made using various printing methods or machine embroidery on fabric. The following inscriptions are applied to the stripes:

• security;
• security;
• security Service;
• security officer.

Patches come in the form of strips (sizes 120×30, 125×35, 250×75, 255×78 and 296×77 mm) or arcs (30×118 and 33×120 mm). The difference between stripes is that they are placed on the front or middle of the headdress or on T-shirts, shirts, jackets (back or chest).

Chevron is intended for clothing sleeves. In addition to the word “Security”, they depict a shield, sword and symbols of Russia (coat of arms, flag). The chevrons are the same in shape, their dimensions are 99x85, 104x87 and 105x89 mm.

There are several ways to attach chevrons and stripes to your uniform. The most convenient way is to use Velcro. You can glue them using thermal film and an iron. The most reliable method is to correctly sew these elements to the form. This is done on a machine using a sewing stitch.