Many men do not like to waste their time visiting the hairdresser. And any girl wants to see a worthy gentleman next to her. Many women are faced with the task of how to cut a man’s hair. Therefore, it is worth mastering the minimum basics of men's haircut techniques.

The basics of doing a men's haircut are not so complicated and are quite accessible even to a person who is far from hairdressing. In addition, there are many video lessons that teach you step by step how to cut a haircut.

Doing a men's haircut yourself will save you money and time. And your loved ones will have a personal, albeit inexperienced, hairdresser.

Haircut rules at home

Homemade men's haircuts do not require any special skill. Before you start, you need to prepare everything you need. The most important item is the machine, without which it is impossible to accomplish this. Also of great importance are scissors, which must be well sharpened. You will need several different combs. Comb with a “tail” - for convenient separation of strands, combs with frequent and rare teeth. Don't forget a shoulder cape, hair clips and a spray bottle.

It is best to cut a haircut from the back of the head and move from left to right, from top to bottom. You should not use too wide strands on your comb. After finishing the haircut at the back of the head, carefully work out the lower contour.

After this, you should switch to whiskey. The haircut is carried out from the temples to the crown. The bangs can be left a little long, this will allow you to comb them to the desired side. When finishing the haircut, it is recommended to go over the entire surface of the head again with a finishing haircut. To do this, you should gather the hair onto the comb with one hand, and, without interruption, move it up towards the crown, and with the other hand you need to trim the uneven ends. The men's haircut technique also includes shaving the neck.

How to choose a men's haircut

Men's haircuts are just as important as women's, but they receive little attention. Women can change their image with the help of makeup and hair styling, but a man can only have a beautiful, spectacular haircut, which should be selected taking into account several criteria. First, pay attention to the shape of your face. It can be square, oval or round.

A square face shape requires choosing a haircut that will soften rough contours and visually elongate the face. Short men's haircuts that can turn a square into an oval are suitable for this.

For an oval, elongated or triangular face, medium men's haircuts are an excellent option, which will create disheveled hair and add creativity and style to the image.

In order to modify a round face, you should perform a layered haircut. It is carried out using a ladder at the temples, steps at the back of the head and bangs on one side. Men with a round face should not wear a mustache or beard. This puts a lot of emphasis on the round shape.

An oval face has an ideal shape, so choosing a haircut provides an inexhaustible field for imagination. You can experiment without restrictions.

At the peak of popularity with shaved temples. It is suitable for men with round, oval or square faces. Men with a triangular face shape should avoid it, as the lack of hair at the temples will highlight the already noticeable cheekbones.

How to cut a man's hair with scissors

Before you start cutting your hair, you should familiarize yourself with the rules that tell you how to cut a man's hair with scissors. Before cutting, wet your hair with a spray bottle. The strands must be divided into temporal, parietal and occipital zones. Select the area to start cutting and secure the rest of your hair with hair clips. Separate a strand and comb it thoroughly. Pinch your hair with your middle and index fingers. Trim the hair exactly 1.5cm above your fingers.

Without letting go of the cut strand, separate the next one and comb them together. Cut the new strand along the first line. The cut strands can also be pinned with a clip so that they do not interfere with the cutting process, but it is necessary to leave a thin strand that will allow you to control the length of the hair. The width of each grip should be approximately 1cm. The haircut will achieve a complete look thanks to the careful design of the contours. This can be done using shading or edging.

The most common are oval, round and trapezoidal edgings. The bangs can be straight, oblique or asymmetrical. Shading is also done using scissors and a comb. Move the comb, cutting off any hair that protrudes from it. Then repeat the process in the opposite direction.

How to cut a man's hair with a clipper

A huge number of men's haircuts are performed using a hair clipper. Therefore, you just need to know how to cut a man’s hair with a machine. This process is very simple, as the machine is easy to use. The length of the hair will depend on the attachment used. It is also used when cutting hair bald, since this cannot be done with scissors. In fact, everyone is capable of doing standard men's haircuts using a clipper.

The machine is also used to make various patterns. But this process requires a certain skill and experience.

It's easiest to have short haircuts, there's less chance of making a mistake, and it's also very convenient to drive the clipper over your head. For long haircuts, use long attachments.

Haircut technology consists of the following process. Place the attachment tightly enough to your head and move the machine from the back of your head to half of your head. The remains can be corrected with scissors. Treat the side and front of the head in the same way. But if the hairstyle needs to be more artistic, you will have to use scissors. At home, you can easily master the art of hairdressing for simple and standard men's haircuts.

How to cut men's haircuts at home

Many women have found themselves in a situation where they need to cut their husband’s, child’s or brother’s hair at home. But in inexperienced hands, the hairstyle, most often, takes on a not very attractive appearance due to the lack of a scheme for its creation. You can ruin your look with one careless movement of your hand, so before you do a men's haircut correctly, you should learn a few basic methods and techniques that will significantly improve your hairdressing skills.

Simple creation technology

Before you start styling your husband’s hair at home, you need to wet your hair and comb it well. After this, they need to be divided into several zones, which should be worked with separately. To begin with, two parallel partings are made from the frontal hollows to the back of the head, separating the temples, and then the parietal area. The result should be 6 sections:

1. parietal,
2. 2 temporal,
3. 3 occipital (first, the upper and lower parts are separated, and then the lower part is divided into 2 more by a vertical parting).

Haircutting at home begins with lifting a strand of the parietal area at the temple. The hair is cut at a distance of 4 cm from the head, and after that each subsequent curl is equal to the previous one, due to which the same length is maintained. During trimming, the strands are pulled perpendicular to the head. After this, you can start working on the temples from the edge of the hair growth, shortening them using the described method until the parting.

In order to make the bottom edge of the hairstyle even, it is necessary to press it as tightly as possible to the neck. Over time, some areas of the scalp begin to dry out and become unruly. To prevent this from happening, you need to wet them periodically. Practice will help you learn how to do all this correctly.

The final stage

After the strands on each of the divided sections have become the same length, it is worth aligning the edging. At this stage, it is important to find out what exactly a man would like to see from the options described below.

Correctly making a edging on the neck at home can be done in several forms:

1. oval;
2. trapezoidal;
3. with rounded edges.

To avoid unevenness, after each movement with scissors, you should carefully comb your hair in the direction of growth and watch for longer strands. The bangs are aligned along the length of the parietal part and rounded so that they smoothly connect to the temples.

You also need to comb your strands in different directions more often. This helps to see individual hairs that have strayed from the general mass.

For the car - we do it ourselves

To independently and correctly create a man’s beautiful hairstyle using this method at home, you do not need to have professional skills. But a little training is still necessary. After all, one careless movement can cause all the strands on your head to shorten. Doing your own clipper haircut will not only help you save money, but it will also be a way to learn how to create a fashionable and attractive masculine look at home that combines several characteristics:

• brutality;
• conservatism;
• accuracy.

But, looking at the diagrams of popular men's hairstyles, it is worth remembering that you need to take into account the features of the face and the shape of the head.

The simplest option is zero. Almost anyone can do this hairstyle correctly, without having the skills of a hairdresser or knowledge of haircut patterns. But it is worth remembering that it is suitable only for men with a standard round head shape.

Sports hairstyles are slightly longer, but are cut according to the same principle. It will be more difficult to do boxing or semi-boxing correctly without the skills and scheme. But if you follow the technique, then no problems will arise.

Another type of short hairstyle is the so-called crew cut, which has a rounded shape. This option is suitable for men with coarse hair types.

Stages of work

The technique of creating hairstyles for men consists of following several basic rules. Before you start, be sure to comb your hair and dry it, as some hair clippers may not be able to handle wet strands.

At the first stage, the strands at the back of the head are cut, and then the hairdresser moves to the temples. First, a nozzle of a certain length is attached to the machine, and the strands are cut approximately to the parietal part of the head. To avoid unevenness, you should run the machine over one place several times.

After this, a smaller nozzle is put on and the process is repeated, but the top edge should be slightly lower to create a smooth transition from the shortest to the longest strands.

To cut the hair at the very bottom, use a flat comb to grab a certain amount of hair. The comb is placed at a slight angle to the head, and all protruding areas are cut with a clipper. Thanks to such actions, a very smooth transition from the growth line to longer strands is obtained.

Factors influencing choice

Some guys suit a very short haircut, while others are categorically against this option and prefer long curls. But you can do both hairstyles correctly using a clipper with scissors, without visiting a professional hairdresser.

If a man has an irregular head shape, then he should learn how to create a hairstyle according to a pattern in such a way that it hides it. With an elongated occipital part, for example, the length of the strands above the forehead should naturally be greater. The shape of the back of the head can also be adjusted with a machine, making the correct transition from shorter to longer hair.

One of the most acceptable options is the half-box, since this type of hairstyle is able to give the desired shape to the head and at the same time can be done at home using a machine.

In addition, with the help of strands, the hairdresser is able to change the visible growth line if it does not suit the man. Professionals have special hairstyles and techniques for certain body types and face shapes.

Advantages of short options

Using the machine, you can learn how to create interesting images for your husband at home, ranging from classic to extraordinary options, in which patterns are created on the head or the hair is shaved asymmetrically. In any case, these hairstyles are very easy to change after waiting a few weeks, unlike options with long curls.

Thus, creating men's hairstyles at home is not as difficult as it might seem. And the many options and methods of their use allow women to experiment and find more suitable images for their husband.

More information

I think that everyone periodically has the need to cut their husband, child, or trim their own hair... All this can be done at home, without spending money and time in hairdressing salons. Of course, have hair clipper It’s not at all necessary at home, but it’s very convenient: it’s not that expensive, but it has a lot of advantages.

I'll tell you how to do the simplest men's haircut with a regular clipper for cutting hair. When cutting your head, we conditionally divide your head into three zones: , see picture (in Figure 1 - occipital, 2 - infero-occipital, 3 parietal, 4 - temporal).

For a haircut you will need:

* first of all, you will need a hair clipper, and it is not at all necessary to buy a professional one, you can cut your hair with a regular household one (good ones) hair clippers from companies such as Braun, Moser, Panasonic, Philips, Babyliss, Rowenta),

* in addition, you will need hair cutting scissors, also not necessarily expensive and super professional, as long as they are well sharpened,
* and further, comb with fine teeth.

Technique for cutting hair with a machine:

Step #1.

Wash your hair and dry it. Some hair clippers (usually professional ones) allow you to cut wet hair, otherwise the blade of the clipper may quickly become dull.

Step #2.

We conditionally divide the head into three zones: temporal, parietal and occipital. Put on the biggest one comb attachment for machine, the length of which you like best, and start a preliminary haircut from the occipital zone, then cut the hair on the temporal zone and, finally, on the parietal zone.

All hand movements should be slow and smooth, move the clipper against hair growth. The more times you run the clipper through your hair, the better the haircut will be, do not forget comb your hair.

Step #3

After cutting your hair (for example, 12 mm), put on smaller nozzle(for example, 9 mm) and do cutting of the occipital and temporal zones again.
In order for there to be a smooth transition on the back of the head from 9 mm to 12 mm, at the beginning of the occipital region you press the machine close to the head, and the higher you rise to the parietal region, the more you move your hand away, so the angle between the nozzle and the surface of the head increases and levels out transition from long to short hair.

The ability to perform men's haircuts is not only a profession, but also an excellent opportunity to save the family budget. In the vast majority of cases, men's haircuts are short. In other words, most of the hairstyle is shaped using a hair clipper. Therefore, mastering the skill of creating classic men's haircuts is attractive (especially for housewives).

Many learn on their own, because men don’t particularly protest. Although it is still recommended to enroll in hairdressing courses. When the basic operating procedures are not only explained, but also clearly demonstrated in practice, the learning process moves much faster.

Today, both can be purchased at extremely attractive prices.

To put it another way, if you cut your husband and son’s hair, you will be able to justify the money spent on buying equipment in just three months (due to short hair, men cut their hair much more often than women).

The haircut starts from the back of the head. The execution steps are given below:

• determine the type of man’s skull;
• depending on the type of skull, choose the edging style;
• remove hair from below with a machine using attachment “1”;
• Using the nozzle “2”, align the transition to the crown part;
• on the top of the head, remove hair to the length that the man prefers;
• move on to the temples, it’s easiest to do them straight;
• at the final stage the bangs are shaped (it is done with scissors).

There's no need to rush. Rushing at the first stage will definitely only lead to minor or major mistakes. In any case, remember that even if the result is unsatisfactory, a man can always go to the salon and have his hair fixed. That is, you can train without fear.

Remember that many men, in principle, cut their own hair. In other words, after completing the courses, you are guaranteed to be able to provide a significantly better quality haircut.

Vartan Bolotov will talk about how to learn how to do a classic men's haircut in 15 minutes:

Characterized primarily by practicality. While women often resort to styling, men style their hair very rarely. Therefore, we must provide for the beauty of the hairstyle directly in the haircut.

The concept of beauty in a men's haircut includes two factors - how natural and neat the hair is, as well as the effectiveness of correcting possible shortcomings.

Let's look at the simplest techniques that hairdressers use to achieve the desired effect.

A short men's haircut is always influenced by the individual's individual characteristics and the fashion trends of the season - the length of hair in different areas of the head, the sequence of treatment of zones and the division of hair into parts can vary.

Individual characteristics - for example, if there is not much hair in the parietal area, you should start cutting from this area of ​​the head. In the case when working with the face requires more attention, it is wiser to start with the temporolateral areas, and reduce the rest of the hair to the previously cut hair.

In other words, the haircut technique is chosen as external circumstances dictate.

Classic men's haircut - some key points

Let's start with the strand on the forehead - it is cut off at the level of the eyebrows (depending on the specific model, the length can be either lower or higher than the eyebrows). Next, another strand is selected at the level of the crown. The choice of the length of this strand will be determined by the desired density of the fullness of the parietal and temporal zones.

The purpose of cutting the parietal area is to smoothly connect these two strands. In this case, we can move from the face to the crown or, conversely, in the direction of the forehead, along or across the profile - it doesn’t matter. Partings can also be very diverse - horizontal or vertical.

The edging of the entire haircut is done As a result, during processing of the front part of the hair, the first frontal strand is accurately and smoothly brought together with the rest of the hair on the crown. And the required volume appears as if by itself.

The sides of the hairstyle are cut vertically, which creates a smooth surface of the haircut.

A simple classic men's haircut easily adapts to any hair type and different ages - it looks equally decent on the heads of men and on the heads of boys. The haircut technology is simple.

For example, let's look at a haircut using simple scissors.

This haircut style is schematic and generalized, so it can be performed on almost any male representative.

Performing a classic men's haircut

1. Comb all strands from the crown down. Then, in a circle, make an edging at an oblique or straight temple (choose the length as desired). The temple should smoothly blend into the contour line of the lower back of the head. The ear may be completely or partially open.

1. At the same time, trim straight bangs to the eyebrows or above, which gradually move into the line of the temple.

1. After edging, first draw a section from ear to ear and two temporal partings until they intersect with the first.

1. Trim the crown of your head . To do this, separate the first strand from your forehead, comb it onto your face and determine the length of the bangs. She will determine the control strand (KP1), focusing on which we will cut the parietal zone.

1. So cut the entire parietal area in rows. Don't forget about the angle of the guy - it should be perpendicular to the head. In our case, the CP will be mobile - it seems to move along the parietal zone. We cut, and each time we focus on the previous strand.

1. It is more convenient to cut the parietal area along paths whose width is equal to the length of your fingers, then it will be convenient for you to grip the hair.

1. Cut the temporal area with vertical partings, focusing on the hair of the crown and the length of the edging. We do this: select the first strand near the face, pull it at an angle of 90 degrees, grabbing a little bang hair from above, and make a smooth reduction to the edging. Then we work in the same way as in the parietal zone - taking it strand by strand.

1. For the occipital zone, a strand by strand operation is also used, with the outermost trimmed strands of the parietal and temporal zones, as well as the edging line, serving as a guide. Moreover, all the hair is cut to approximately the same length, only closer to the edging the length smoothly fades away. All transitions in the haircut should be smooth.

This men's haircut can be worn in different ways: combing the hair back, to the side or forward, as well as forming bangs.

But no matter which way we comb our hair, a well-executed haircut retains the plasticity of the surface (smoothness). Even if the hair is tousled by the wind, the strands in their movement should not go beyond a single contour, which, by the way, is created with the help of an edging.

Good luck to you!

More about short men's and women's haircuts:

Want to keep up to date with the news? Get new master classes? Interesting, useful articles by e-mail? Subscribe to our free newsletter. To subscribe, register on the site.

Sports men's haircuts are not only short crew cuts or box cuts. You can adjust the length of the bangs, leave curls on the crown, and shave at the temples. Sports hairstyles are also done on medium-length hair. What unites them is not only neatness, ease of care and short strands.

First of all, sports haircuts are universal. Despite their name, they are suitable not only for the gym. A business and busy person should also pay attention to them. After negotiations and presentations - to a football game with friends, and then on a date - without straightening your disheveled hair. Business trip, resort, dacha – laconicism is appropriate everywhere. Photos of various types of sports hairstyles are presented on our website.

Secondly, sports haircuts are comfortable. If it requires time and effort, then for sports haircuts you only need a small comb. If you leave the volume at the top plus bangs, a hairdryer and a comb are enough. A little gel or wax may be needed for medium length hair.

Thirdly, men want to see themselves as brutal, restrained, courageous, standing firmly on their feet. Short, stylishly cut hair will perfectly highlight these qualities.

Fourthly, sporty style hairstyles have no age restrictions.

They are good for teenagers, youth, mature and older people.

The main thing is to choose the right one according to the shape and features of the face.

Who is it suitable for?

Great: men with a wide, round or oval face, thick eyebrows, large facial features, and a pronounced chin. The shape of the skull plays an important role - the smoother the better.

sporty hairstyle is great for men with a square face shape

Fine: For men with a square or diamond-shaped face. The forehead may be high, in which case it is worth lengthening the bangs a little. We advise young people who are accustomed to being the center of attention to choose. Like no other hairstyle, it will emphasize individuality.

The haircut is not suitable for men with a long, narrow face, long nose, or sharp chin.

For small features, it is better to choose a different style. It is better to hide scars or blemishes on the scalp under longer hair, for example.

Good news for owners of all hair types: you can choose a sporty haircut for any structure and density of strands. There are options even for curly and fine curls. In ours you can see photos of haircuts with a shaved head.

ultra short men's haircut

sporty haircut for oval face shape

Video: boxing haircut technique

In case of rapid baldness, a “zero” haircut is the simplest and most radical way to solve the problem.

To implement this you will need scissors, a comb, a clipper with attachment No. 1 and a safety razor.

haircut to zero

Technique:

• wash and dry your hair;
• if there are long strands, first cut them to the minimum length with scissors;
• use a machine to go through the back and sides of the head to the same minimum length (you can even do it on the back of the head); first vertically, then horizontally and diagonally;
• To make it smooth, use a safety razor.

"Hedgehog".

The hair is very short on the sides - 0.5 - 0.7 cm, longer on the top - 1.5 - 2 cm.

In the classic version, it follows the shape of the head, but with gel and a hairdryer you can lift the lying strands to the top. To add negligence, which is fashionable now, ruffle it in different directions. This haircut is easy to pull off, unlike model haircuts. You will need: straight and thinning scissors, comb, machine.

“hedgehog” hairstyle option

Technique:

• wash and dry your hair;
• divide your head into zones. The first parting is vertical - from ear to ear through the crown. The second parting is horizontal - from temple to temple through the back of the head;
• Using the machine, go through all the hair from the back of the head from bottom to top, to the line of the second parting. As you approach this line, you can gradually increase the length of your hair so that the transition is smooth;
• Using scissors, gradually cut the strands, starting from the frontal part to the line of the first parting; You need to cut it gradually, leaving no more than 2-3 cm.
• treat the temples, trim them. The length of the hair on the temples - as on the back of the head - is very short;
• smooth out any unevenness, smoothing out the transition between partings.

Suitable for guys with an oval face shape.

short crew cut

Technology for performing "Platform" or "Beaver" hairstyles

Another name is . Features smooth, even lines. On the parietal part of the head it resembles a platform rounded on the sides. No sharp corners. Suitable for any face shape, except long ones. Requires morning styling with a hairdryer and comb. The more hair left on the top of the head, the more room for creativity. You can comb your hair back to the office, make a side parting in the evening, and on the weekend create a slightly careless effect on your head. Tools for creating this hairstyle: machine with attachment No. 1, comb, scissors.

The hairstyle is also suitable for children. The platform will set him apart from his peers.

hairstyle playground

Technique:

• wash and dry your hair;
• mentally draw an edging line between the temples through the back of the head. All hair below this line falls under the machine and has a minimum length of 0.5 - 1.5 cm.
• on the frontal part, the height of the future area is set - 3-5 cm. Moving towards the crown, gradually shorten the length of the hair. On the edging line, the difference with the back of the head should be minimal.
• the secret of a level platform - when cutting with scissors, the strands must be kept strictly perpendicular to the head;
• we cut off the side parts - when cutting, the curls should be at an angle of 90 0 to the finished area. As you approach the temples, the hair length decreases. The temple areas can be further processed with a machine;
• trim the haircut, achieving a smooth and rounded shape.

beaver hairstyle

“Boxing” and “Poluboxing” – description and photos of short hairstyles for boys and men

The essence is very short hair on the sides and a little longer on top. It may seem that they are similar to the Hedgehog, but they are not. “Hedgehog” involves a smooth transition from short to long strands. The transition is noticeable and contrasting.

Half-boxing allows for longer hair lengths than boxing, as well as variations with bangs.

? To perform this haircut, you will need a clipper with attachments No. 3 and No. 1, a comb, and scissors.

sports hairstyle boxing

Execution technology:

• wash and dry hair;
• use a machine with nozzle No. 3 (for a half-box - No. 4) to treat the entire head;
• Draw an edging line above the temples through the back of the head. Cut the hair below this line using a clipper with attachment No. 1;
• Using a comb and scissors, thin out the bangs, first cutting them to the desired length.

half box haircut

Men's haircut in youth style "Canadian"

Involves voluminous hair in the frontal and parietal parts of the head. And the occipital, temporal parts and crown are much shorter.

The haircut creates the appearance of bangs originating at the very top of the head.

To create a hairstyle for guys you will need: a machine with attachment No. 2, scissors, a comb.

Canadian with long bangs

Technique:

• wash and dry hair;
• comb them back;
• draw three edging lines: from ear to ear through the crown - the first parting; from each temple to the first parting;
• starting from the frontal part, separating strand by strand, cut off the hair. Leave a length of 3 cm. Finish at the first parting. Important! The strands should be kept at right angles;
• treat the sides of the head in the same way;
• Using a machine, process the lower occipital part, from the beginning of the hairline to the middle of the back of the head. As you approach the top, increase the length of your hair. You can change the nozzle to No. 3;
• Use scissors to trim the strands and smooth out the transition points.

Canadian with one side comb

Canadian looks great on boys and guys. Many parents choose this youth haircut for kindergarten graduation.

Five options (with a half-box - 6) are presented for every taste. A novice hairdresser can handle each of the haircuts. They can be done at home and therefore fit any budget.

It just seems that a men's haircut is nothing special. In fact, this is practically a real masterpiece, because you need to take into account the smallest details and nuances: the oval of the face, the type of figure, the character of the gentleman himself. Learning how to cut men's hair is not as difficult as it seems. The main thing is to strictly follow the instructions.

It is quite possible to give a man a professional haircut at home. You just need to practice a little, choose the right equipment and accessories, and you can safely get down to business.

Rules for men's haircuts

You can cut men's hair in different ways - with scissors and clippers. Each master chooses the method that suits him best. However, it is worth considering that creating a hairstyle using scissors is a more labor-intensive task. And it is best to resort to this method only if you feel enough strength, experience and skill within yourself.

The best option is to create a hairstyle using a hair clipper. This is faster, more convenient, and less dangerous.

In any case, before you start cutting your hair, you need to stock up on a whole hairdressing kit, which includes:

• hair clipper
• comb
• regular scissors
• thinning scissors

Start your haircut by covering the man with a sheet, just like in a professional salon. This is necessary so that the cut hair does not fall behind the collar and irritate the skin. And cleaning up the haircut area will be much easier later. Comb your hair thoroughly.

Remember that it is best to cut your hair on clean hair. They are more obedient and lighter. If the hair is slightly damp, that's even better.

Depending on how long you are going to cut your hair, choose the attachment for your clipper. Naturally, it is easiest to cut your hair shorter: this way there is less chance of making a mistake, and it is more convenient to drive the clipper over your head. For longer haircuts, choose long extensions.

Start cutting from the back of the head. The technology of the process is as follows: place the nozzle quite tightly to the head and begin to move the device from the back of the head to half of the head. Drive the machine as if you were pushing it forward slightly. This will help make the haircut more uniform. Anything left over can be trimmed with scissors.

If you plan to cut your hair evenly using a clipper, treat the sides and front of your head in the same way. But if the hairstyle needs to be more artistic, you will have to pick up scissors.

Move to the top uncut part. Comb all the hair forward, then take a section no more than a centimeter thick and, holding it between your fingers, carefully move along it with scissors, cutting off the excess. It is best to use scissors at an angle, this will help avoid too sharp cuts.

Don't forget about bangs. Comb it down, take the scissors so that they are pointing vertically upward and make neat cuts. For a smooth transition of strands, cut at an angle.

Correct all imperfections with regular scissors. This will not compromise the integrity of the hairstyle, and will help eliminate defects as carefully as possible.

This chapter is devoted to classic, model and creative men's haircuts.
The pages provide examples and types of different men's hairstyles.
Regardless of your age, you can choose one or another fashionable men's hairstyle, and learn in detail how a haircut is done.
This information will be useful for both novice hairdressers and hairdressing professionals. A novice hairdresser will be able to learn the technology of performing such men's haircuts as a simple men's haircut, a graduated bob, a sports-style men's haircut, or such popular men's haircuts as boxing, half-boxing or a crew cut, etc., and a professional hairdresser will again test your knowledge or find something new to improve your skills
All men's haircuts are provided with full descriptions and pictures.
Choose, look, experiment - everything is in your hands!

Simple men's haircut

Hair: not too thick.
Tools for a simple men's haircut: straight scissors.
Skill level: beginner.

This is a neat, not very short men's haircut, performed using the strand by strand method.
The essence of this simple men's haircut is that the length of the hair is the same throughout the entire head.
Even someone who has never held hairdressing scissors in their hands can perform such a simple men's haircut.
To do this, before starting a simple men's haircut, he will have to read some pages of the site,
to see how to hold hairdressing scissors correctly, which means the method of cutting hair strand by strand,
straight cut (methods of processing hair strands) and pulling hair 90°.
Performing a simple men's haircut
Before starting the haircut, wet the client's hair and comb the hair. It's better if you don't just wet your hair, but wash it.
In men's haircuts, the hair is washed twice: at the beginning of the haircut and at the end of the haircut.
Divide your hair into zones. To divide the hair into zones, draw vertical partings from the forehead to the edging line at the back of the head.
These partings should be parallel.
Make a sagittal parting and you will get six zones: the parietal zone, two temporal zones, the middle occipital and two lateral occipital zones.
In the parietal area at the edge of the hairline, select a strand of hair, cut a strand of hair at a distance of 3-4 cm from the roots. This strand of hair will be the control. We cut the entire parietal area using the strand by strand method with the hair pulled back at 90°.
Let's go down to the temples. The control strand is at the edge of the hairline near the face. The partings are vertical, the temporal zones are cut like the parietal zone. You stand behind the client.
So we cut all the hair of the temporal zones using the method strand by strand until the sagittal parting.
We cut the back of the hair, starting from the central zone. The control strand is on the sagittal parting.
Let me remind you once again that all simple men's haircuts are performed using the strand-by-strand method with the hair pulled back at 90°.
We also cut the lateral occipital areas.
Comb all the hair from the back of the head downwards.
We do the edging of the hair at the back of the head. When combing your hair, try to press the hair as tightly as possible to your neck.
If your hair is dry, wet your hair. The edging of the back of the head can be oval, trapezoidal with straight or rounded edges. The edging line should not be higher than the marginal hairline.
To improve the quality of the edging, do not be lazy, comb your hair several times, each time checking the evenness of the line and adjusting the edging line as necessary.
The edging line behind the ears runs almost at the very base of the ear. Before reaching the lobe, it connects to the edging of the back of the head. Temple straight.
Now comb all the hair from the parietal area forward. Edging the bangs. The edge of the bangs should be straight. You will cut about 0.5 cm, but no more. Now round it a little towards the frontal hollows, connect the edging line of the bangs with the temples.
I advise you to comb the hair at your temples many times and in different directions, checking and removing excess hair. After such a check, the edging line will be perfect, and a simple men's haircut will look high-quality.

ADVICE FROM A HAIRDRESSER
Test for a new comb: Run the teeth across your palm. If you get scratched, so will your hair.
Good brushes have mixed bristles; they consist of natural and artificial components.
These brushes are ideal for combing 100 times every night, which is still recommended by professionals.

A control strand of hair in the parietal area of ​​the face, 3-4 cm long

For the middle occipital zone, the control strand of hair is on the sagittal parting
Let's go down to whiskey

We cut the lateral occipital zones, like the middle zone of hair, using the strand by strand method.

The back of the head is straight

The edging of the bangs is made with a straight cut, the edging line of the bangs is slightly rounded towards the frontal depressions

Men's haircut done with a hair clipper.

Hair: short, preferably coarse.
Tools for men's haircuts: machine, thinning scissors.
Skill level: beginner.

Cutting men's hair with a machine requires skill, so when you first try to cut it, it is better to leave the hair longer.
Cut your hair with loose, slow movements.
First, cut off a small amount of hair.
When cutting your hair, comb your hair frequently.
Performing a men's haircut with a hair clipper
Perform this men's haircut on dry hair. Using the largest nozzle, we cut the hair of the parietal zone, going down slightly to the temples.
To do this, we comb the hair according to its height, and insert the machine into the hair against the hair growth. We make a lot of movements with the hair clipper, we move the clipper over the head, pressing it to the surface, but we do not change the angle with the surface of the head.
How many times we comb our hair and use the clipper will determine how accurately and efficiently a men's haircut will be done: the more, the better.
Now we cut the back of the head. To cut the back of the head, we use a smaller nozzle, about twice as large (that is, if the crown was cut with a 12 mm nozzle, then the back of the head - 6 mm or 9 mm). Starting the haircut from the bottom, we move the clipper upward, and if at first the clipper is pressed tightly to the head, then at the crown of the head the clipper comes off the head, leveling the difference between the length of the hair.
Using the same attachment, we cut the temples, while combing the hair in different directions.
Now comes the hard part. Remove the attachment from the machine. Your task is to make a smooth transition from the parietal zone “to no”. Using a clipper we make a smooth transition from short hairs at the edging line to the hair that was cut before.
We perform the edging of the temples, behind the ears and neck with a machine without an attachment.
Using simple scissors, we check the length of the hair over the entire head.
Using thinning scissors on a comb, we eliminate all inaccuracies and unevenness in a man's haircut.

ADVICE FROM A HAIRDRESSER
The most important and most problematic part of the machine is the knife. The knife in a hair clipper consists of two parts: movable and fixed.
Knives become dull over time. It is recommended to sharpen the knife at least once every two years, without waiting until the knife becomes completely dull and has to be replaced with a new one.

We start cutting the crown from the face, using the largest nozzle

We do the edging of the back of the head with a machine without an attachment.

Trimming the back of the head and temples is done with a clipper with a smaller attachment.

Short men's haircut with comb.

Hair when cut with a comb: thick, medium thickness.
Tools for performing a men's haircut with a comb: straight scissors, comb.
Skill level: beginner.

If your client asks for a very short men's haircut and you don't have a clipper, this haircut is exactly what you need.
The entire haircut can be done with only straight scissors and a classic comb.
It is better if the client’s hair is thick and not thin and that he has been wearing the same short haircut lately.
Performing a men's haircut with a comb
Depending on the thickness of the hair, this men's haircut can be performed on dry or damp hair.
Dry hair is more convenient to cut, but dry hair dulls the scissors and makes it difficult to create a smooth transition on the hair. Our advice: if your hair is very thick, start cutting on dry or slightly damp hair, and at the end of the cut, wet your hair and check.
We start this men's haircut with a comb by combing all the hair according to its natural growth.
We cut the parietal area, moving from the face to the back of the head with a comb. We insert the comb into the hair against the growth direction, cutting off the hair directly above the teeth.
We cut the back of the head from bottom to top. To avoid a “ladder”, we comb the hair at a slight angle and do a check, removing all the excess hairs sticking out above the comb.
It is best to check in crossing directions at the back of the head. To do this, we first lead from the left side of the edging line towards the right temple at an angle, and then vice versa - from the right to the left temple. Only stray hairs need to be trimmed.
Let's move on to cutting the temples. We cut the temples from bottom to top, then from the face. Often on the temple closer to the crown of the head in men, hair grows away from the face and slightly downwards. Remember that we always insert the comb against the direction of growth and cut the hair above the crown.
We check the area between the temple and the crown, moving from bottom to top (as when cutting the temples) and from the face (as when cutting the crown).
Create an edging line. Temple straight. We remove everything that sticks out behind the ear. The edging of the back of the head is soft, with rounded corners. We remove all hair below the edging with a razor. If you don't have a razor, use the tips of scissors, but in any case, be very careful not to injure the client. For the edging line in this men's haircut, the reference point should be the natural hair growth.
If, in addition to straight scissors, you have thinning scissors, that’s great. Wherever there is a barely noticeable “ladder”, process the ends of the hair with thinning scissors.
This men's haircut with a comb emphasizes the natural beauty of a man - the features of the shape of the skull, facial features, ears, hair texture and the edge line of its growth. That is why such a men's haircut requires careful execution.

We cut the parietal area from the face to the back of the head
The back of the head is cut from bottom to top

Let's move on to cutting the temples

Creating an edging line

Classic men's haircut.

Hair for a classic men's haircut: any.
Tools for performing a classic men's haircut: straight scissors.

This men's hairstyle is considered a classic style.
Strands of hair of moderate length are laid away from the face, the temple is open and straight. This style is loved by many men of any age.
There are a lot of options for haircuts for men in the classic style. Perhaps, after studying a few, you will come up with your own haircut technique.
And this option, a classic men's haircut, in our opinion, is the easiest to perform.
Performing a classic men's haircut
Before starting a classic men's haircut, divide clean, damp hair into zones.
We start the classic men's haircut from the right temporal zone. Parallel to the edge of the hair growth line, select a strand of hair with a diagonal parting, first comb it onto the face and cut off the corner of the temple towards the face. We comb it down and perform the edging of the temple. The temple should be straight.
Using a horizontal parting, select a strand of hair at the temple, pull it at an angle of 90° and cut it with a straight cut. So, in a row, separating the strands with horizontal partings, we cut all the strands of the temporal zones, first on the right and then on the left side.
Next, we cut the strands of hair from the upper and then the lower occipital zones using the technique of removing hair on the fingers.
The reference point will be the newly trimmed strands of hair in the temporal zones.
We cut the occipital area in the direction from right to left from ear to ear so that each subsequent strand is perpendicular to the head and equal to the previous one.
We also cut the lower occipital zone with vertical partings, with a 90° extension, and cut the strand at an angle of 45°.
We perform edging of the hair of the lower occipital zone and behind the ears.

ADVICE FROM A HAIRDRESSER
Brushes, as a rule, are more elastic than combs; brushes are less damaging to the hair and gently massage the scalp.
To remove hair from a high-quality mixed bristle brush, do not scrape it with a comb - rather, rub two brushes against each other or buy special “rakes” at a hairdressing supply store just for this purpose.

ADVICE FROM A HAIRDRESSER
Combs and brushes should be washed regularly with lukewarm water and shampoo. Brushes with wooden handles or rubber bases should not be kept in water while cleaning. After rinsing thoroughly, place the brushes to dry on a towel, bristles down.

Using a diagonal parting, select a strand of hair, comb the strand towards the face and edge the temple

Use a horizontal parting to highlight a strand of hair at the temple and cut it with a straight cut
The reference point for the upper occipital zone is the newly trimmed strands of hair in the temporal zones

Control of symmetry in a classic men's front haircut

Control strand of hair for the parietal area at the temple

Unifying haircut between the crown and temporal areas

Men's polka haircut.

Hair for men's "Polka" haircut: any.
Tools for performing a Polka haircut: straight scissors.
Skill level: beginner.

This men's polka haircut is made in a classic style.
A special feature of the Polka haircut is the volume at the temples.
When styling, all hair is usually combed back.
“No” we cut only the lower occipital area of ​​the hair.
The line of the edging of the temples is dense.
The hair on the crown and temples is the same length.
Men's Polka haircut is good for older men or those who have noticeably less hair at the temples than at the crown.
Performing a men's haircut "Polka"
We cut the strands of the parietal zone using the finger hair removal technique.
To do this, parallel to the edge line of hair growth at the forehead, select a strand of hair with a horizontal parting, comb the strand perpendicular to the head and cut, leaving a length of approximately 3 cm. Parallel to this strand, select the next one, comb it along with the previous one perpendicular to the head and cut at the level of the previous strand.
So, in rows, separating strands of hair with horizontal partings and combing them perpendicular to the head, cut the entire mass of hair in the parietal zone at the level of the previous strand, first the middle part of the parietal zone, and then the side parts.
Separate the upper occipital area of ​​hair from the lower with a horizontal parting. We cut the mass of hair in the lower occipital zone using the “no” technique.
Trim the strands of hair in the temporo-lateral zones on the right and then on the left side using the finger hair removal technique. To do this, parallel to the edge hair growth line of the temporolateral zone, we select a strand of hair with a vertical parting and comb it onto the face, perform an edging, focusing on the length of the strands of the parietal zone. In parallel to this strand, select the next one, comb it out together with the previous one and cut it at the level of the previous strand. So, in a row, separating the strands with vertical partings and combing them along with the previous one perpendicular to the head, cutting the entire mass of hair in the temporolateral zones at the level of the previous strand.
Strands of hair from the upper occipital zone are cut using the technique of removing hair on the fingers, focusing on the length of the strands of the parietal zone and temporolateral zones.
Moreover, we cut hair strands in rows.
The final stage of the men's Polka haircut is the edging of the haircut.
We trim the hair with straight scissors, after wetting the hair or combing it with a wet comb.

Control strand of facial hair 3 cm long

We reduce the lower occipital zone of hair to “nothing”

Select a strand of hair at the temple, comb a strand onto the face and make an edging
We trim the temporal zones using the method of removing hair on the fingers, focusing on the parietal zone

Strands of hair from the upper occipital area using a haircut technique, removing hair on the fingers

Men's half-box haircut.

Hair when performing a half-box haircut: any.
Tools for performing a men's half-box haircut: straight scissors, hair clipper.
Skill level: ability to cut hair with a clipper without an attachment.

The essence of the half-box haircut method is that cutting part of the temporolateral zones and part of the occipital zone is performed by cutting the hair “to nothing”, and cutting the parietal zone is performed by removing hair on the fingers. A men's half-box haircut has two edgings: one edging is along the edge line of hair growth, the other edging is along the upper edge of the hair reduction at the temples and back of the head.
Performing a men's half-box haircut
We begin the half-box haircut from the center of the occipital zone, first in one direction, then in the other, stripe by stripe, using the “nullification” method with a hair clipper or razor.
If you work with a machine, your hair may be dry; when using a razor, your hair must be moistened with water.
The upper border of the treated area runs along the line of the upper point of the ears and the occipital protuberance (it is slightly lowered towards the center).
If you're not sure you can make a straight line with a machine, use scissors first.
At the temples, we cut the hair taking into account the level of the previously trimmed occipital area.
After this, we trim the hair on the neck, temples, and behind the ear.
In order to make the transition from short to long hair smoother, you should perform a very smooth shading of the hair 2-3 cm above the control line. In this case, you can use straight and thinning scissors and a razor.
Then we cut the hair of the parietal zone on the fingers and lightly thin the hair.
During haircuts, shading, and thinning, it is necessary to work on the shape of the half-box hairstyle, trying to veil all appearance flaws and, if possible, give the half-box hairstyle the correct oval shape.

We cut the back of the head with a clipper “to zero”, creating an edging line

We perform smooth shading of hair along the control line
We cut the whiskey, focusing on the trimmed back of the head

We cut the hair of the parietal zone on the fingers, moving away from the face

Men's boxing haircut.

Hair when performing a men's boxing haircut: any.
Tools for performing a men's boxing haircut: straight scissors, hair clipper.
Skill level: ability to operate a hair clipper without an attachment.

The boxing haircut, unlike the semi-boxing haircut, has shorter hair, and the border of the hair border runs above the occipital protuberance.
In a boxing haircut, the border of the hair edging can be at different heights and have different shapes (taking into account the shape of the head and hair growth).
This haircut is preferred by young people with the correct head shape.
A men's boxing haircut will look neater on hair that is not too black.
Performing a men's boxing haircut
Using straight scissors, we mark the boundary of the transition from long to short hair.
If the temples are very sunken, the hairline can be made lower, but if the temples are quite convex, the hairline can be raised higher. If the back of the head is very convex, then the edging of the hair should pass under it.
We reduce all hair up to this line to “nothing” with a hair clipper.
We trim the hair all over the head with a machine or razor.
We cut the hair of the parietal zone on the fingers using the strand by strand method.
Then we carefully shade the hair of the edging line (thinning scissors, razor).
The width of the hair shading strip can be different and depends on the hair color. With dark hair, the hair shading should be wider than with light hair.
Work the hair near your face with a jagged cut, comb the hair onto your face and cut off any stray hairs with the tips of the scissors.

We cut the back of the head with a hair clipper “to zero” to the control line

We cut the parietal area using the strand by strand method, control strand near the face

Men's bob or “platform” haircut.

Hair when performing a men's bob or “plate” haircut: not thin, the hair should hold its shape well.
Tools for performing a men's bob or "plate" haircut: straight scissors, hair dryer, comb.
Skill level: self-confidence, good knowledge of haircutting techniques.

The most difficult stage of performing this men's haircut is the design of the so-called “platform”,
which is located in the area from the line of the forehead to the crown and has a strictly horizontal surface.
Creating a completely flat horizontal “platform” line requires special care.
When cutting, the hair should be in a strictly vertical position, and the better the hair is drawn,
the better the quality of the men's haircut. The comb and scissors are kept in a strictly horizontal position,
and the scissors, positioned parallel to the comb, move with it, not lagging behind or ahead of it, in order to prevent defects in the haircut.
Performing a men's bob or “platform” haircut
Before cutting, moisten the hair with a fixative, give the hair a vertical position and blow dry, trying to maintain the resulting shape.
If the hair length exceeds 5 cm, you should pre-cut it, leaving the hair length at about 5 cm, since long hair cannot be fixed in a vertical position.
We start the haircut from the side zones.
When cutting, the hair should be pulled away from the head so that the hair is perpendicular to the intended “platform”. We move from the face to the back of the head, strictly observing this position of the comb and scissors. This is how we cut the upper occipital and temporal zones.
We reduce all the hair in the lower zones to nothing, and you can use scissors or a hair clipper.
We move on to the formation of the “platform”. We outline the height of the “platform” near the face, highlighting a strand of hair with a horizontal parting.
Similarly, we determine the height of the “platform” on the top of the head.
We connect the trimmed strands with a vertical parting and get a control strand.
After this, we cut all the hair in the parietal zone with horizontal partings, focusing on the control strand.
We trim the haircut all over the head. Temple straight.
In this men's haircut, the edging line should be clear.

ADVICE FROM A HAIRDRESSER
Almost any hair can be styled into the desired hairstyle, but in everyday life the main thing is how the hair will lie without styling.
For all voluminous haircuts (Bob, Beaver, Hedgehog, etc.) you need hair with a fairly large growth angle.
Such hair seems to show the hairdresser that these haircuts are exactly for them.
To get the ideal “platform” it is better if the hair is not only raised, but also thick.
Most likely, it was thanks to this hair structure that these haircuts appeared.

Use a hair dryer to straighten your hair
The side areas of the hair are cut using a comb

We outline the height of the “platform” at the forehead

Men's beaver haircut.

Hair when performing a men's beaver haircut: should keep its shape well.
Tools for performing a men's beaver haircut: straight scissors, comb.
Skill level: self-confidence, mastery of basic haircutting techniques.

This men's beaver haircut resembles a bob haircut, but at the temples the hair is not strictly perpendicular to the “platform” on the crown of the head,
and the angle between the temples and the “platform” is slightly rounded.
This haircut looks less contrasting and is therefore more popular with men. It is easier to perform such a haircut, but accuracy and work skills are required.
If you doubt yourself, do the haircut gradually, do not immediately remove your hair to the required length - this will make it easier to achieve the desired result.
Performing a men's beaver haircut
We start the beaver haircut from the upper occipital area. We cut the hair from the center to the temples with vertical partings on the fingers.
The fingers should be perpendicular to the intended area, and the fingertips should touch the head.
We reduce the lower occipital zone to nothing with a hair clipper.
Then we cut the hair of the parietal zone, that is, we create a “platform”. When starting to form the “platform”, you should take into account the client’s wishes regarding the height of the “platform”, however, according to the general rule, with a wide face, the hair on the “platform” should be left longer, and with a thin face – shorter.
It is very important when cutting the “platform” to set its level correctly. To do this, we cut a strip from the frontal protrusion in the middle of the parietal zone to the crown. This strand will be the guideline when creating the “platform”.
The length of the hair at the forehead should be approximately 3-5 cm, and towards the crown the hair length gradually shortens. At the border with the occipital area (trimmed earlier), we reduce the hair to “nothing.” In order for the “platform” to have a perfectly flat surface, it is necessary to move the comb so that the hair under it continues to remain in a strictly vertical direction. When cutting the hair of the side zones, comb the hair from the bottom up.
During cutting, the hair of the side zones should be pulled perpendicular to the “platform”. When cutting the left side, the scissors are positioned with the ends down, and when trimming the right side, the ends are up.
Now we soften the angle between the “platform” and the temples. This can be done either with simple serrated scissors or with thinning scissors, but the cut will be straight. Regardless of the tool, we cut the hair by lifting the hair on the comb.
To get a good quality haircut, repeat these movements several times on each strand.
We trim the haircut all over the head with the tips of the scissors. For best results, wet your hair along the edge line.

The upper occipital area of ​​the hair is cut with vertical partings on the fingers
We set the level of the “platform” with a vertical parting in the center of the parietal zone

Whiskey cut on a comb

Softening the angle between the “platform” and the temples

Men's crew cut.

Hair when performing a men's crew cut: not thin.
Tools for performing a men's crew cut: straight scissors, comb.
Skill level: mastery of basic haircutting techniques.

The Hedgehog haircut is similar to the Beaver haircut, but differs from it in its oval shape.
If you leave your hair shorter, you get a successful interpretation of a short haircut - simple and natural.
Successful versions of this men's hedgehog haircut allow you to create different types of hair thinning.
As a rule, this haircut is performed on hair with a large growth angle.
Performing a men's haircut "Hedgehog"
First, we cut the hair from the occipital area to the crown and the temporal area to the temporal protrusions (taking into account possible head defects).
If necessary, you can finish cutting the back of the head 1 cm below the crown.
Trimming the temples and back of the head can be done with straight scissors on a comb or using a hair clipper.
When cutting the hair of the parietal zone, you should try not to cut the hair on the “platform” below the level of the already trimmed hair on the top of the head. Therefore, it is better to cut your hair with a small margin of length, which can then be easily shaded. To obtain an oval shape, the edges of the “platform” are slightly rounded.
To make the “Hedgehog” haircut look like a hedgehog, the entire parietal area can be worked with thinning scissors.
The “Hedgehog” haircut will be perceived completely differently if you work the ends of the hair with a jagged cut or using the pointing method.
To style your “Hedgehog” hairstyle, you can use a small amount of foam, but you don’t have to dry your hair with a hairdryer.
Squeeze the foam into the palm of your left hand, wet the fingers of your right hand in it, insert your fingers into your hair and work your way up from roots to ends.

The upper occipital area is cut with vertical partings on the fingers

Round the edges of the “platform” to obtain an oval shape

Men's haircut "Voyage".

Hair when performing a “voyage” haircut: any.
Tools for performing a “voyage” haircut: straight scissors, comb, thinning scissors.
Skill level: mastery of basic haircutting techniques.

A characteristic feature of the “voyage” haircut is a visible clear line separating the lush volume of hair strands in the parietal zone and the “vanished” strands in the lower occipital and temporolateral zones. Apparently, thanks to this characteristic feature, this haircut, as well as haircuts made on the Voyage basis, is often called a “cap”.
Performing a men's haircut "voyage"
Make a random horizontal parting from one temple to the other; on the back of the head the parting should be lower than on the temples.
Gather the strands above the parting into a bun and secure with a hair clip.
In the lower occipital area, parallel to the horizontal parting, select a strand of hair and cut the strand on your fingers, leaving a length of 1-1.5 cm.
The strand must be cut, observing the direction of the haircut from the temple to the middle of the occipital area.
This strand of hair will be the control for the temples and back of the head.
Next, using the technique of removing hair “to nothing”, we cut the strands of the temporal zones and the lower occipital zone, that is, we make a smooth transition from the edge line of hair growth of the temporal and lower occipital zones to the control strand.
At this stage of the haircut, you can trim the hair.
It is better if the edging line is soft, since the “voyage” haircut itself looks more romantic than strict.
Parallel to the control strand in the upper occipital zone, select the next strand, comb it together with the control strand and the haircut at the level of the control strand with an extension of 1.5-2 mm.
So we cut the entire parietal area of ​​the head in straight lines.
Next, we comb out all the strands of the parietal zone according to hair growth and perform edging.
We check the clarity of the “voyage” haircut by combing the strands randomly and eliminating visible differences in the lengths of adjacent strands.
We lightly thin the parietal area with a thinning razor, highlighting the strands with vertical partings.
We cut the ends of the strands of the parietal zone with thinning scissors, highlighting the strands with vertical partings.
Laying strands of hair in a hairstyle should be done, focusing on a clear line highlighting the parietal area.
The originality and romance of the “voyage” haircut can be emphasized by highlighting several strands with wax.

Below the parting, select a strand and cut at a distance of 1-1.5 cm
We make a smooth transition from the edge hair growth line to the control strand

Parallel to the control strand of hair, select the next strand and cut the hair with an extension of 1.5-2 mm

Thinning the hair of the parietal zone with a thinning razor

Men's haircut "Favorite".

Hair when performing a “favorite” haircut: any.
Tools for performing a “favorite” haircut: straight scissors, comb, thinning scissors.
Skill level: mastery of basic haircutting techniques.

Another haircut technique, the characteristic feature of which is a visible, clear horizontal line,
separating the lush volume of the parietal zone and short-cropped strands by eliminating the temporal and lower occipital zones.
Unlike the Voyage haircut, this line will be lighter due to the modified haircut technology.
Performing a men's haircut "favorite"
Place a horizontal parting at the level of the top of the ear through the occipital protuberance.
We cut the strands of hair in the lower occipital area using the technique of reducing them to nothing.
First, we cut the strands of hair from the lower occipital zone, then the strands from the temporal zones.
During the cutting process, we arbitrarily determine the line of the control strand; the length of the control strand is also determined during the cutting process.
We divide the hair of the parietal zone with a vertical parting from the middle of the forehead through the crown to the control strand.
We continue cutting hair in the upper occipital area.
Parallel to the control strand of hair, select the next strand of hair and comb it towards the control strand. We cut it at the level of the control strand with an extension of 1-2 mm. So, in a row, separating the strands with horizontal partings, cut the hair up to the vertical parting, so that each subsequent strand is 1 mm longer than the previous one.
We check the clarity of the haircut along the vertical parting. To do this, comb the strands to the right and left of it and equalize the length of the strands: the strands should be equal in length.
We comb the strands according to hair growth and perform edging of the hair strands in the parietal area. We perform the edging of the back of the head and temples. The edging of the hair should be soft and rounded, just like the “favorite” haircut itself.

ADVICE FROM A HAIRDRESSER
Pulling while cutting allows you to change the length of the strands.
Having outlined the control strand and the direction of the haircut, you can begin to correct the length.
If you pull the strands in the direction of the haircut, they will become shorter.
If you pull the strands in the direction opposite to the direction of the haircut, then subsequent strands will become longer.
The angle of the strands will determine the extent of these changes.

We reduce all hair from the parting to the edging on the neck and temples to “nothing”
The strand of hair above the parting is at the level of the control strand

Unifying haircut

Edging the hair at the back of the head

Men's haircut "Brig".

Hair when performing a brig haircut: any.
Tools for performing a brig haircut: straight scissors, comb, thinning scissors.
Skill level: mastery of basic haircutting techniques.

The men's "Brig" haircut is based on the "Voyage" haircut and is a haircut, the distinctive feature of which is a lush volume of hair in the parietal zone (stepped haircut) and removed strands of hair in the lower occipital and temporal zones.
Performing a men's brig haircut
Before you start cutting the brig, wash your client's hair and lightly dry the hair with a towel.
Make a horizontal parting randomly at the level of the top of the ear. Pin the hair above the parting so that the hair does not interfere.
Parallel to the horizontal parting, done at random, select a strand of hair below the parting and cut it, leaving a length of 1-1.5 cm.
We make a haircut, observing the direction of the haircut: from the face to the middle of the occipital area on one side and the other.
Next, using the technique of reducing the hair “to nothing,” we cut the entire mass of hair in the lower occipital zone and parts of the temporal zones located below the horizontal parting. That is, we make a smooth transition from the edge hair growth line to the control strand.
Next, we cut the strands of hair in the upper occipital area.
Parallel to the horizontal parting, select a strand of hair, comb this strand towards the control strand and cut at the level of the control strand with an extension of 1-2 mm.
At the same time, do not forget to follow the direction of the haircut.
So, in a row, separating the strands with horizontal partings, we cut the entire mass of hair in the parietal zone to a vertical parting, running from the middle of the forehead to the middle of the neck.
Parallel to the vertical parting from the middle of the forehead to the crown, select a strand, comb it perpendicular to the head and cut it randomly.
We will consider this strand of hair as a control.
Focusing on its length, we cut the strand near the face. Comb the strand perpendicular to the head.
In parallel to this strand, select the next one, comb it out and cut it at the level of the control strand.
So, in straight lines, separating the strands with horizontal partings, we cut the entire mass of hair in the parietal zone. In this case, each subsequent strand should be perpendicular to the head.
Next, we comb the strands of hair from the frontal area onto the face and make an edging.
If a client wears bangs and the bangs are too long, cut a small strand to the desired length, and then separate the strands with vertical partings to eliminate the resulting length difference.
We check the accuracy of the brig haircut by combing the strands randomly in different directions and using a thinning razor to eliminate possible differences in the lengths of adjacent hair strands.
We cut the ends of the hair strands in the parietal zone with thinning scissors.

A control strand of hair below the parting, 1-1.5 cm long

We make a smooth transition from the edge line to the control strand of hair

Select a strand of hair above the parting and cut it at the control level with an extension of 1-2 mm
Control strand of hair for the crown, parted vertically

Select a strand near the face and cut it at the level of the one you just cut.

We comb out all the hair on the face and do the edging

We thin out the ends of hair strands with thinning scissors

Men's haircut for thin thick hair.

Hair when cutting for sparse thick hair: sparse, of sufficient thickness.
Tools for cutting thin, thick hair: straight scissors, comb, hair dryer, thinning scissors.
Skill level: mastery of basic haircutting techniques.

A haircut for sparse thick hair is performed in such a way as to reduce the volume of hair in the side zones and at the back of the head, while maintaining the length of the hair of the top layer, the softness of the line of which is achieved by thinning the hair with thinning scissors.
This haircut can be done on any hair.
A special feature of this technique for cutting thin, thick hair is that the hair must be styled with a hairdryer before cutting.
Performing a men's haircut for thin, thick hair
Before starting the haircut, wash the client's hair and dry the hair in the parietal area, lifting it at the roots with your fingers.
In order for the hair to rise at the roots, you will have to make movements with your hands that you would do if you were working with a hair styling brush.
The hairdryer should be directed at the roots of the hair, but casually so as not to burn the scalp.
Drying your hair incorrectly will not give the desired effect.
When drying your hair, first hold the hair dryer in your right hand and then in your left.
Select a strand of hair near the face and determine the length of the strand.
Next, strand by strand, we cut the parietal area on a comb using thinning scissors.
The lower temporal and occipital zones are cut using simple scissors with vertical partings with a 90° pull, cut at an angle of 45°.
Now you can trim the hair at the temples and back of the head.
The hair of the upper temporal zones and the upper occipital zone is cut with thinning scissors, taking the hair in wide vertical partings.
Our task is to connect the lower hair zones with the parietal hair.
In the parietal zone we perform hair thinning (we cut the hair to half the main length), and if we cut the parietal zone with vertical partings, now we select strands of hair with horizontal partings.

ADVICE FROM A HAIRDRESSER
Strand by strand on a comb using thinning scissors
We select a strand, lift the hair with a comb, insert thinning scissors into the strand below the level of the intended cut and begin to perform frequent movements, moving upward along the strand and gradually accelerating the pace of closing the scissors.

Blow-dry the client's hair at the roots on the fingers.

We trim the hair at the back of the head and behind the ears
Select a strand of hair from the face and determine its length

We perform unifying hair cutting with thinning scissors

Cut strands of hair from the lower occipital area at an angle of 45°

We thin the hair at the crown to half the length

Men's haircut "Sagittarius".

Hair when performing a Sagittarius haircut: any.
Tools for performing a Sagittarius haircut: straight scissors, thinning scissors.
Skill level: self-confidence, mastery of basic techniques.

A characteristic feature of the Sagittarius men's haircut is the presence of a high side parting with elongated bangs.
The temple is open, the edging of the temple is “corner”.
It is good to style the Sagittarius haircut with wax, creating strands, or after drying, comb the hair with a comb.
To add volume and highlights to the haircut, it is recommended to highlight the hair on the cap.
Performing a men's Sagittarius haircut
We start the Sagittarius haircut from the right temporolateral zone.
Parallel to the edge line of hair growth, select a strand with a horizontal parting, comb it along the hair growth and make a “corner” edge.
In parallel to this strand, select the next one, comb it to the previous one and cut it at the level of the previous one with a pull of 45°. So, in straight lines, highlighting strands of hair with horizontal partings, we cut the entire temporal zone on the right side.
Then we cut the temporal area on the left side in the same way.
Parallel to the edge line of hair growth in the temporal zone on the right side, select a strand with a vertical parting, comb the strand onto the face and make an edging.
Using a vertical parting, we highlight the trimmed hair on the temple next to the occipital area, comb the not yet cut hair from the occipital area into it, pull it a little towards the face and cut it off at the level of the already trimmed hair.
Using this method, strand by strand, separating the strands with vertical partings, cutting all the hair of the temporolateral zone and the upper occipital zone to the middle of the occipital zone.
During the cutting process, pay attention to the increase in the length of the strands towards the middle of the occipital area. We cut all the strands on the left side in the same way.
Next, in the lower occipital zone, we perform preliminary edging with a bracket and, using the technique of removing hair on the fingers, cut all strands of hair.
That is, parallel to the edge line of hair growth in the lower occipital zone on the right side, we select a strand with a vertical parting, comb it out together with part of the strand of the upper occipital zone and the haircut, focusing on the length of the strands of the upper occipital zone and the length of the strands of the edging.
In parallel to this strand, select the next one, comb it out together with the previous one and cut it at the level of the previous one at an angle of 90°.
So, in straight lines, separating the strands with vertical partings, we cut all the hair of the lower occipital zone with a slight pull towards the face.
We edge the hair behind the ear, following the hair growth line.
Next, separating the hair strands with diagonal partings, we perform a test cut of the strands of the occipital zone on the right side of the vertical parting.
In this case, the direction of the haircut is from the ear to the crown.
Similarly, we cut the strands of hair on the left side of the parting.
We make the final edging in the lower occipital area.
We cut hair in the parietal area.
To do this, parallel to the side parting that separates the parietal and temporal zones, select a strand in the temporal zone, comb it perpendicular to the head and trim it.
Parallel to this strand in the parietal zone, select a strand and comb it to the previous strand, cut at its level, while the strand of the temporal zone is perpendicular to the head. So, in a row, separating the strands with vertical partings and combing them tangentially to the head, we cut all the hair in the parietal zone.
We cut the hair, combing all the strands of the parietal zone, first to the right and then to the left.
We perform edging of the hair of the parietal zone.
To do this, comb all the strands of the parietal zone onto the face and make a “corner” edging, connecting the strands of the temporal zones and the parietal zone.
We cut the ends of the hair with thinning scissors.

At the temple, we edge the hair with a “corner”

We cut the temples, focusing on the control strand, with a pull of 45°
Control strand of hair for the occipital area at the temple

We perform preliminary edging of the hair with a brace on the fingers

We perform a test haircut with diagonal partings

We cut the hair of the parietal zone with vertical partings

We perform edging of the hair of the parietal zone with a “corner”

Men's haircut "Curl".

Hair when performing a curl haircut: any.
Tools for performing a curl haircut: straight scissors, comb, thinning scissors.

The “curl” haircut is characterized by the absence of clear lines, soft transitions to the back of the head and side strands, turning into graceful strands descending onto the face.
Above the forehead, the hair of the frontal zone forms a slightly outlined vertical curl.
The thinning technique for the parietal zone can be used in other haircuts. At the back of the head, the corner of the “cap” can be made soft or sharp.
Thin tanks will look good.
Performing a men's curl haircut
We do the edging of the hair at the back of the head. It is better if the edging is sharp.
The “curl” haircut is for youth, and preference in its implementation is given to all sorts of new trends in haircuts.
The temple can be sharp and long. Thin tanks will look good.
We select a horizontal parting, from ear to ear at an angle with the apex at the height of the cervical vertebra and cut the hair of the lower occipital zone very short with scissors over a comb.
We part the hair from the middle of the occipital area to the temple, observing the angle at the back of the head.
We cut the hair with vertical partings at an angle of 45°, focusing on the trimmed lower zone.
Using a parting parallel to the edge of the trimmed area, select a strand of hair from one temple to the other and cut it to the desired length.
At the temples, the hair should at least cover the earlobes. At the back of the head we maintain an angle.
We comb the hair on the crown of the head according to its height and perform the edging of the hair at the level of the hair that was just cut.
Using thinning scissors, we cut the hair of the parietal zone. Select a control strand near the face, set the length and move towards the back of the head.
We cut the parietal area using the strand by strand method.
We grade the hair on the crown, while selecting strands perpendicular to those that we just selected.
We graduate the hair at an angle, with the angle pointing towards the face.
At the back of the head, the partings should extend from a point on the crown, and the angle should point away from the crown.

Hair below the parting cut very short over a comb

We cut the parietal area of ​​hair using horizontal partings using thinning scissors.

Set the length of the control strand of hair above the parting
We perform thinning of hair on the back of the head

We thin the hair on the crown of the head by parting in several places

Edging the bangs with a sliding cut

Asymmetrical men's haircut with parting.

Hair when performing an asymmetrical haircut: medium density and medium softness.
Tools for asymmetrical haircuts: straight scissors, comb, razor.
Skill level: ability to work with a razor.

An asymmetrical haircut with a parting is recommended for young and middle-aged men with any hair structure except thin hair.
An asymmetrical haircut is performed on clean, damp hair, usually with a razor.
You will need some work skills.
The asymmetrical haircut technique consists in creating a base for hair volume under the mass of hair in the parietal zone on the opposite side of the razor parting.
Performing an asymmetrical haircut with a parting
Using parallel partings, we separate the parietal zone of the hair from the temporal zones.
We start with an asymmetrical haircut at the temples.
Using vertical partings parallel to the hairline, we separate the strands on the right and left temples and cut them off with a razor while pulling them onto the face.
These strands of hair will be the control.
The subsequent strands are cut to the middle of the back of the head using the strand by strand method with a pull towards the face. Using the same method, we mill the lower part of the occipital zone.
To do this, first on the right and then on the left in the lower occipital area at the temple, select a strand of hair with a vertical parting next to the edging line and cut it off with a razor, simultaneously filing along the entire length.
So we cut the entire lower zone to the central vertical parting on one side and then on the other.
We trim the temples and back of the head using straight scissors with a serrated cut.
Along the natural parting line, select a strand of hair 2 cm wide and cut it with scissors in the shape of a “fringe” 3-4 cm long.
Using a razor, we blend the hair first to the temple, and then from the side of the crown to remove a sharp transition in length, focusing on the previously trimmed hair of the temporal zone on the opposite side of the trimmed parting and on the length left at the parting.
We perform a connecting haircut of the crown to the sagittal parting. We cut the hair using straight scissors with a jagged cut.
We continue the unifying haircut in a circle until the parting is cut.
In the parting, at the back of the head, we shade the hair with a razor.
To do this, select 2-3 horizontal partings 1.5-2 cm thick.
Hair styling with a hairdryer is done without parting.
The hair above the forehead is styled asymmetrically.

Select strands of hair at the temples, comb them onto the face and cut with a razor

We perform a unifying haircut on the opposite temple
A strand of hair 2 cm wide cut in the shape of a “fringe” 3-4 cm long with a sliding cut

Blend the hair towards the temple with a sliding cut

Shade the hair towards the crown

Shade the hair on the back of the head with a razor

Men's hair cutting using a unique technology.

Hair when cutting: soft, not liquid.
Tools for cutting: straight scissors, comb, thinning scissors.
Skill Level: Excellent knowledge of haircutting techniques.

When performing this hairstyle, special attention should be paid to cutting technique. Thanks to a professionally done haircut (the appearance of the hairstyle has a triangular and asymmetrical shape), the hair lies freely, enlivening the face and giving it originality.
The hair on the back of the head is quite short, but retains its volume.
Performing men's hair cutting using unique technology
Before starting a haircut, wash the client's hair. Starting from a point in the center of the crown, divide the hair into six sections, which represent six sharp triangles.
These sections of hair are distributed as follows: one in the front of the head, two on the sides and three at the back of the head.
For convenience, the hair in these areas can be pinned up. If the hair is damp enough, it is enough to comb it thoroughly.
We start cutting in the center of the back of the head in the direction from bottom to top to the point of distribution of strands.
To do this, along the edge of the hair growth on the back of the head, select a strand 1-1.5 cm wide and cut it off. The length of this strand of hair is no more than 2 cm.
Above the trimmed strand, select the next one, comb the strands of hair together and cut. Strand extension 60°, cut the entire area using the strand by strand method. You should cut it by holding a strand of hair between your fingers and pulling it tightly.
We continue cutting the hair on the back of the head according to the same principle.
In the same way we cut the sections of hair above the ears.
Align the hair strands with the previous ones, keeping them perpendicular to the scalp.
Then we cut the connecting strand between the side and top hair. This strand of hair will be the control.
This way, all the hair at the top of the head will be combed in successive strands perpendicular to the face.
The effect of such a haircut is to automatically gain length.
When making a haircut, you must simultaneously strive to ensure that as you move towards the front of the head, the length of the hair increases.
Then we comb the hair in the upper part of the head the way it should lie in the hairstyle, compare it with the side hair (from the face to the back of the head).
Next, we determine the length of the tanks.
Having outlined the contour of the ear, we lighten the mass of hair in this area using thinning scissors.
Then we evenly lighten the bottom of the back of the head and check the front strand of hair by combing the hair onto the face.
Its outline should fit into the oblique line to match the asymmetrical length of the hair at the top of the head.
We dry the hair on the sides well, lifting the hair, then continue styling using a brush and hair dryer and trying to maintain maximum hair volume.
It is necessary to observe the clearly marked change in hair length in profile and in front.
It should be emphasized that this triangular and asymmetrical shape of the hairstyle is obtained solely due to the haircut.

Divide your hair into six sections, starting from the center of the crown

Control strand of hair for the occipital area at the marginal hairline
We cut the back of the head using the strand-by-strand method with a 60° pull.

All hair in the parietal zone is consistently equated to the control strand

Control strand of hair for the crown parted

Lightening the mass of hair in the temporal zones

We perform an asymmetrical edging of the bangs at an “angle”

Men's sports haircut .

Hair when performing a sports haircut: not very thin and sparse.
Tools for performing a sports haircut: straight scissors, comb, thinning scissors.
Skill level: beginner.

The styling of this men's sporty haircut can vary widely depending on the style and situation.
Undoubtedly, there is nothing more convenient than a short haircut, but the requirements for the quality of the hairdresser’s work in this case will be increased. Here is a haircut option for a business or sports-style man who strives for neatness and restraint, rather than romanticism.
Remember, any haircut requires maximum precision from the hairdresser, and a short haircut is especially important.
Performing a men's sports haircut
We start cutting hair from the back of the head. In the center of the occipital zone, use vertical partings to select a strand of hair 1 cm wide, comb the strand perpendicular to the head and cut at an angle of 90°. The length of the hair strands is approximately 3 cm.
This strand of hair will be the control.
We move from the center to the temples, focusing on the control strand.
This is how we cut the entire upper occipital area.
Let's move on to cutting the temples.
Using a vertical parting along the edge line of hair growth, we determine a strand, pull it perpendicular to the head and cut it at an angle of 90°, with the fingers pressed tightly to the head, and move to the back of the head.
Then we select a strand of hair in the center of the parietal zone with vertical partings, comb the strand perpendicular to the head and cut it to the length we need (from 3 cm and longer). The drawbar during cutting is 90°. This strand of hair will be the control. With its help, we will determine the length of the strands on the crown of the head, which we will highlight not with vertical, but with horizontal partings.
Parallel to the edge of the hairline near the face, select a strand, comb it perpendicular to the head and cut it, focusing on the control strand.
So we divide and cut the entire parietal zone with horizontal partings. We connect the parietal and temporal zones, cut off the corner.
We make a haircut border on the back of the head, behind the ears and on the temples.
On the back of the head, using the shading technique, we make a smooth transition from short hair along the edge of hair growth to the already trimmed upper occipital area. We use the same technique on the temples.
We remove all possible defects using thinning scissors.
We file the bangs with straight scissors using a sliding cut. Thinning with a sliding cut should be done so that the hair falls apart into strands on its own, and at the same time the bangs will look very natural.
We fix the hair with gel and lay it in the desired direction (raise it at the roots or smooth it).

A control strand of hair in the center of the occipital zone, 1 cm wide

We cut the temples with vertical partings
We perform edging of the temples

In the center of the parietal zone, select a strand of hair

Determine the length of the control strand of hair for the crown

We file the bangs with straight scissors using a sliding cut

Hair cutting with teeth.

Hair with a jagged cut: curly or slightly curly.
Tools for cutting with teeth: straight scissors.
Skill level: mastered the basic types of cuts.

A jagged haircut is suitable primarily for those who have curly hair.
A jagged haircut looks quite short, and the jagged haircut technique allows your hair to look thicker.
The “teeth” cut creates soft cut contours.
The haircut looks very natural and at the same time neat.
Cutting hair with teeth
We start the haircut from the upper occipital area of ​​the hair. Select a strand of hair in the center, pull the strand perpendicular to the head and cut it with “teeth” to give the hair a softer texture.
Focusing on the freshly cut hair, we cut the hair with vertical partings, first in the upper zone of the hair, and then in the lower occipital zone.
While cutting, we move from the center to the temples.
Remember that if you increase the angle of tension in any direction, the strands will be shortened or lengthened.
In the center of the parietal zone, using vertical partings, select a strand of hair, outline its length, focusing on the trimmed back of the head. We do the haircut on the fingers. This strand of hair will be the control.
The cut line runs parallel to the head, the length guide is the hair on the back of the head.
We trim the temples, focusing on the crown, highlighting strands of hair with vertical partings.
We complete the haircut by edging the back of the head, temples, and shaping the edge line of the bangs, giving the hair the effect of an “overgrown haircut.”
It is best to use wax to style your haircut.

In the center of the occipital area, select a strand of hair and perform a “teeth” haircut

Control strand of hair in the center of the parietal zone
We trim the temples, focusing on the crown

Give your hair the effect of an “overgrown haircut”

Men's haircut graduated bob.

Hair when performing a men's haircut is a graduated bob: soft or medium soft.
Tools for cutting a graduated bob: straight scissors.
Skill level: diligent beginner.

A graduated bob haircut is popular with men with slightly curly hair and those who like to take care of themselves and devote enough time to their appearance.
A graduated bob can be worn with or without a parting.
Often bob haircuts are performed without graduation.
You can also perform such a bob; for this it will be enough to perform only the first part of the haircut (before graduation).
Technique for men's haircuts: graduated bob
Men's haircut is a graduated bob for fairly long hair, and a bob haircut is performed only on damp hair.
Using a horizontal parting, select a strand of hair at the back of the head along the edge of the growth.
For convenience, we pin up all the hair above the selected strand.
Determine the length of the hair strand.
It should be remembered that after the hair dries, the length of the hair will decrease. Therefore, the first strand should be slightly longer than the desired length.
This strand of hair will be the control at the first stage of cutting.
Also, using a horizontal parting, select a strand of hair above the control strand, comb it out and cut it on your fingers, focusing on the control strand, while the hair pull should be zero.
If the bob should be without graduation, each strand during cutting should be 1.5-2 mm longer than the previous one.
While cutting, we gradually move to the temples.
That is, when, during a haircut, you draw a horizontal parting at the level of the top of the ear, then this parting will already be across the entire head from ear to ear.
For graduation, select a strand of hair on the top of the head. This strand at the base should have a diamond shape with the vertices directed towards the middle of the neck and face, towards the ears. Pull the hair strand 90°.
Determine the length of the strand. The strand must be at least 10 cm.
All other hair is sequentially pulled towards the control strand of hair and cut off.
We carry out the calibration as follows. Parallel to each of the partings in the occipital area, select a strand, comb it to the control strand and cut it at its level.
We do all this until we cut off all the hair longer than the control strand.
It is more convenient to perform graduation from the back of the head.
We comb out all the hair on the face and make an oval edging. You can trim the hair with a sliding cut or teeth.
We finalize the entire haircut with a sliding cut along the entire head from the roots of the hair to the ends.

ADVICE FROM A HAIRDRESSER
If you are doing a bob haircut without graduation, then after finishing the haircut, work all the hair using the pointing method. Do all the same movements that you just did, only you need to hold the scissors parallel to the hair. Pointing is performed on dry hair.

We cut the control strand, the length of the strand determines the length of the bob haircut

We highlight the occipital strands of hair with horizontal partings and cut them at the level of the control strand
When we go up to the temples, we make partings from ear to ear

For graduation on the top of the head, select a strand of hair, at the base of which there is a diamond

We edge the hair around the face in the shape of an arc

Men's haircut creative "cap".

When performing a men's haircut, the hair is a creative “cap”: thick.
Tools for cutting a creative “cap”: straight scissors.
Skill level: excellent knowledge of basic cutting techniques.

Men's haircut creative "cap" is a very modern youth haircut.
The creative “cap” haircut is easy to style, “holds” well on any hair and retains its shape for a long time.
For a creative “cap” haircut, there are many options for hair coloring and hair styling.
This haircut will emphasize the masculinity of a romantic man and decorate a manly man.
Technique for performing men's haircuts: creative “cap”
We start the creative “cap” haircut with the edging of the hair. Separate the temporal area of ​​the hair with a parting from the parietal area and perform a straight edging of the hair at the temple.
Carefully work out the edging of the hair behind the ear. The hair should go along the base of the ear.
We similarly perform the edging of the hair on the other side.
We comb all the hair back and trim the hair at the back of the head.
The edging of the hair should be straight, and the transition from the edging behind the ears should be almost vertical.
Using a straight parting from ear to ear above the earlobes, we separate the hair from the parietal zone.
All hair below the parting is cut, highlighting the vertical strands, with the hair drawn at 90°. We cut the hair at an angle of 45°.
We cut this area from the middle of the back of the head, first in one direction, then in the other direction.
We comb all the hair according to its height and mark the line of the “cap” with straight cuts.
On the top of the head in the parietal zone (on the sagittal parting) we select a wide strand of hair, determine the length and cut the strand of hair with cloves.
We cut all the hair on the crown using the strand by strand method, moving from the back of the head.
We cut the entire parietal area to the bangs, highlighting the hair in wide strands.
We cut bangs with straight cuts at an angle.
To do this, divide the entire bang into several horizontal strands of hair and cut them at different angles.
We work all the hair in the parietal zone, starting with the bangs, using the pointing method on dry hair.
Apply styling foam to damp hair and blow-dry using a simple comb or comb.
If you perform styling by brushing, the client’s appearance will be softer and not bright.

We trim the hair at the temples with straight scissors

We trim the hair on the back of the head in a straight line
The area of ​​hair below the parting is cut, highlighting the hair with vertical strands

The parietal area is cut from the back of the head to the face to the bangs

We set a “cap” line throughout the head, starting from the back of the head

We work on all the hair in the parietal zone, starting with the bangs, with pointing.

Men's double bob haircut.

Hair when doing a double bob haircut: any.
Tools for cutting a double bob: straight scissors, thinning scissors.
Skill level: mastery of basic haircutting techniques.

Double bob is a bright creative men's haircut that will require accuracy and skill from you.
Although the haircut is called a bob, the method of doing this haircut is different from the one described earlier.
A men's double bob haircut is suitable for men who like to style their hair in strands and enjoy wearing long bangs.
Technique for performing a men's double bob haircut
Using a zigzag parting, we separate the temporal zones and the occipital zone of the hair.
This parting should start on one side of the face and end on the other side (that is, from one temple to the other). The parting should go above the ears.
We pin the hair above the parting so that the hair does not interfere with the haircut.
Below the parting at the temple, select a strand of hair and determine the length of the upper part of the haircut (approximately to the middle of the ear).
Now, separating the strands with vertical partings, we will grade the hair at the bottom of the haircut, moving from the face to the back of the head.
We comb each selected strand upward and cut it at the level of the previously trimmed edging. So we do the haircut first on one side of the head, then on the other.
We carry out the edging of the bob haircut over the entire head. We cut the hair on the fingers with a slight pull of the hair towards ourselves. Then we thin out the edge of the edging with a serrated cut or thinning scissors (if the hair is very thick).
In the center of the parietal zone, select a strand of hair.
We twist the strand into a bundle and cut it at the required level of about 10 cm.
From the central point on the parietal zone, we separate strands of hair and trim the strands, moving clockwise. Cut the hair parallel to the head.
The length guide will be the hair cut before.
If the hair is thick enough, work the entire parietal area, stepping back 2-3 cm from the ends.
We trim the strands of hair near the face with straight scissors using a sliding cut. We start edging from the middle of the bangs downwards, first on one side, then on the other.
We make a sliding cut along the entire length of the hair with straight scissors.
A double bob haircut can be styled in completely different ways depending on the wishes of the client.

Below the parting, select a strand of hair and determine the length of the upper part of the haircut

Graduation of the lower part of the hair

The double bob haircut is edged all over the head.
In the center of the parietal zone, select a strand, twist it into a rope and cut it off

We cut the crown of the head in a circle, focusing on the hair that was cut earlier.

Controlling hair symmetry when cutting a double bob in front

A modern version of the men's half-box haircut.

Hair when performing the modern version of the men's half-box haircut: any.
Tools for performing a modern version of a men's half-box haircut: straight scissors, thinning scissors, comb, hair clipper.
Skill level: mastery of basic haircutting techniques.

The modern version of the men's half-box haircut is suitable for all occasions -
both for special occasions, or business negotiations, and for sports.
Once you've mastered the classic haircut, try this new haircut technique.
It has several new techniques - once you master them, you can diversify your other haircuts.
Technique for performing a modern version of a men's half-box haircut
We begin the haircut by edging the hair behind the ears, and then edging the hair at the back of the head.
Using a hair clipper, we remove the fluff at the back of the head and finalize the edging line.
This method of edging hair is very convenient, as it allows even a non-professional to edit quickly and without errors.
On the back of the head, using thinning scissors, we cut the hair using the “no” hair removal technique.
We make especially frequent movements with scissors along the edging line.
We perform the thinning itself many times, first on the ends of the hair, and each time we make a haircut, introducing the comb deeper into the hair.
Using vertical partings at an angle of 30-45°, we cut the hair of the upper right and upper left temporal zones using the strand-by-strand method.
In this case, we focus on the hair of the lower temporal zones.
We cut the hair of the upper occipital zone from the temples to the back of the head on the fingers.
We separate the strands with horizontal partings, pull the hair at an angle of 90° and cut it off, focusing on the newly cut hair.
In the upper occipital area, we perform a check with horizontal partings. We remove all inaccuracies by cutting with cloves.
Checking with perpendicular partings is always the best option, and especially for short haircuts, since it is difficult to grip the hair with thin strands.
In the parietal area between four fingers, pinch three strands of hair, lift the strands vertically and arbitrarily cut them in a “herringbone” shape.
Strand by strand, thin the parietal area at the roots with thinning scissors.
Edge the hair on the bangs with “teeth”.

We start a half-box haircut by edging the hair all over the head.

Using a hair clipper we finalize the edging

We reduce the lower occipital zone to nothing.
We cut the temples with vertical partings away from the face, cut at an angle of 30-45°

Control strand of hair for the upper occipital area at the temple

On the crown of the head, we pinch the strands between our fingers and cut them in the form of a herringbone.

We thin out a half-box haircut using a comb

We edge the hair on the bangs with “teeth”

Beard and mustache trimming.

Beards.
Beard trim.
Face correction with a beard.
Mustaches and sideburns

A beard and mustache can not only decorate faces, but also hide existing imperfections, such as a small or sloping chin,
too full cheeks, long or very wide nose, large distance between the nose and upper lip, full lips, etc.
Beard and mustache hair is coarser than scalp hair; sometimes beard and mustache hair grows unevenly and may even have different shades of color.
The density of mustache and beard hair also varies.
All this must be taken into account when choosing their style, because it is impossible, for example, to wear a mustache if the hair grows very rarely above the upper lip.
Beards

The choice of beard shape is purely individual. The beard can be oval, wedge-shaped, wide, narrow, trapezoid, scapular, or frill-shaped.
When trimming a beard, it is always necessary to take into account the color of the hair: for example, with dark hair and light skin, you should not make the shape of the beard very voluminous, and it is better to shave off the hair on the cheeks so that the hair does not stand out too sharply on the face (bob, “horseshoe”, skipper's).
With blond and red hair, the beard can be wide, since the beard no longer stands out so sharply against the background of the face.
The choice of beard shape and size is also influenced by a person’s height. So, with short stature, the beard should be small in size (“frill”, bob, goatee).
With average height, the choice of beard and mustache styles is unlimited, but tall men need to wear a large, thick beard, which significantly enlarges the face and improves the proportions of the figure. When choosing a mustache style, you should also consider your height.
The hair on the cheeks can be shaved off or left on.
If the hair on the cheeks is not shaved, then trimming the beard should begin with the preparation of the base - removing hair on the cheeks and neck.
At the same time, the longer the beard, the less hair should be removed on the cheeks and neck.
Before you start cutting your beard, you need to comb it well, placing the palm of your left hand under the beard.
Then cut the hair from the sides, while holding the scissors with the ends up. When reducing the beard taper to nothing, you must constantly ensure that its sharp end is located exactly in the center of the chin.
After this, the hair above the jaw near the ears is shaded, and then the entire surface of the beard is polished.
If the cheeks must be shaved, then the work begins with shaving the cheeks and neck to the line of the beginning of the beard.
Then they trim the mustache, remove the hair under the lower lip and begin shaping the beard using a comb.
The slanting edges of the beard should be very thinly shaded.
The simplest, most unsophisticated form of beard is worn, as a rule, by people engaged in purely male work and showing that they have no time to take care of themselves.
The English (skipper) beard is most often preferred by men who have a connection to the sea and want to emphasize this.
The goatee is usually associated with the image of a courageous intellectual. The hair on the cheeks is removed very short or even shaved off. After this, the transition is worked out, and it is very important that the side lines of the beard are strictly symmetrical.
Oval beard. First, they cut the hair on the neck, on the cheeks, and then (standing to the right of the client) they cut the right side of the beard, gradually bringing the hair “to nothing” towards the temples. Then, moving to the left side, the left side of the beard is styled in the same way. After this, the oval contour of the beard is formed and polished.
A long bob beard is cut similarly to a Russian beard. The hair on the cheeks closer to the cheekbones is removed and shaded, the mustache is separated from the beard by a sharp line. When cutting a short bob beard, great care is required.
On the right and left sides, hair is removed along an oblique line from the earlobes to the mustache, and on the neck and cheekbones it is shaved. Then all edges are carefully shaded and polished.
Russian beard. When starting a haircut, first trim the base of the beard. The cheeks are not shaved; the ends of the hair are usually left natural. The line of hair on the cheeks is not interrupted and is integral with the hair of the beard. The mustache is separated from the beard; for this, the hair at the corners of the mouth and lower lip is trimmed with the ends of scissors. The goatee (hair under the lower lip) should also be removed.
After this, having carefully combed the beard, they proceed to the final design of the beard (depending on the intended shape). The beard can be trimmed from the sides, left longer or shorter.
Cone-shaped beard. A tapered beard is characterized by a pointed end and straight cone lines. Under no circumstances should they be bent or broken. The hair on the cheeks can be shaved off or left on.

FACE CORRECTION WITH A BEARD
A round face is corrected by a fuller hairstyle in the parietal area and an elongated beard from temple to temple (for example, “trapezoid”). The mustache should be of medium size with the ends down.
A triangular face that is tapered at the bottom requires a rounded beard in the shape of a horseshoe or square to widen the lower part of the face and give the chin a more massive appearance.
An elongated face is corrected by a wide, rounded beard (for example, oval in the shape of a horseshoe, trapezoid). It is not recommended to wear a goatee or tapered beard, as such beards visually lengthen the face.
A trapezoidal face is corrected by a beard, which visually narrows it in the lower jaw area.
A “jabot” beard, a skipper beard, or a bob type, is suitable for this.

Beard trim

Comb the beard, holding the beard with your left hand
We cut hair from the sides of the beard by holding the hair up

Shading sideburns with a comb

You can trim sideburns using a hair clipper

types and shapes of beards
Shoulder beard Wedge beard
Skipper beard Jabot beard
Russian narrow beard (can be short, medium, full) Russian wide beard (most often shaped like a shoulder blade)
French pointed beard French full beard

WEDGE-shaped

SKIPPER

Russian narrow

Russian shovel

French narrow

French full

Trimming mustaches and sideburns.

Mustaches and sideburns
Psychologists say that by the shape of a mustache you can determine a person’s character and find out whether he imitates his idols, follows fashion trends, or sticks to his own views while maintaining individuality. For example, a “walrus” mustache indicates a lover of zucchini and cheerful companies.
The shape of the mustache is determined by facial features and primarily by the size of the nose and lips.
The mustache can be cropped, short, long, narrow, fluffy, or curly.
Long mustaches (such mustaches are also called Ukrainian) have narrow ends, which are formed with a razor using the thinning method.
If the mustache is too full, you can thin out the layer of hair with thinning scissors; To reduce the length of the mustache, the mustache should be trimmed by combing from the ends to the roots.
A short, or English, mustache is trimmed against the grain of the hair, and then the mustache is shaped.
When cutting a mustache, the scissors should not be in a very flat position, otherwise you can injure the skin above the upper lip.
Curly mustache. First, the mustache itself is trimmed, and then the notch in the middle of the mustache is shaved with the ends of a razor. In order to get a curly shape, the edges of the mustache are shaved.
Sideburns should always have a clear, defined shape. To prevent the sideburns from extending onto areas of the skin where there is no hair, the sideburns are carefully edged along the sides and bottom edge.
The hair of the temples and sideburns should be the same length and form a single line.
Sideburns are trimmed with scissors and a hair clipper.
A mustache, beard, and stylish sideburns always attract attention and make a man look impressive.
When choosing a model of mustache, beard, sideburns, you need to take into account the fashion trend, but always in accordance with the individual’s personality.

ADVICE FROM A HAIRDRESSER
The mustache and beard must be very well-groomed, otherwise they take on a sloppy appearance and do not decorate their owner.
types and shapes of mustaches

Ukrainian full mustache 1

Curly mustache 2

Semicircular full mustache 3

A voluminous mustache emphasizes efficiency, position, and confidence 4

Such a mustache may belong to a “bohemian” person, a romantic 5

The elegant look of a “socialite” will be successfully complemented by a mustache 6

This is the mustache of a ladies' man, a heartthrob, a horse-riding enthusiast and 7 women

An elegant fluffy mustache characterizes its owner as a thinking person who knows how to make independent decisions 8

Mustache of an intelligent business man, neat and precise in carrying out his decisions 9

Mustache of a military man who has not lost his bearing 10

Belarusian mustache 11

A mustache with the ends down speaks of doubt, indecision, weakness of will12

Anna Lyubimova

There are many people in the world who prefer their own bathroom to beauty salons. If there are a couple of good mirrors, convenient cabinets and shelves on which you can lay out everything you need, it could very well turn into a modern hairdressing salon - only without queues, the pungent smells of chemicals and strangers, not taking their eyes off the unfinished styling.

Both men and women are guilty of cutting their hair at home. All of them can be divided into three categories:

• people are busy and undemanding;
• thrifty owners, “thrifty” by nature;
• creative individuals.

The latter are especially interested in realizing some unusual idea with their own hands, so they are aware of technical innovations and devices with which they can create a trendy hairstyle on their hair. But so does everyone else home salon fans, although they reject the services of professionals, they want to look attractive and well-groomed.

Publication from Training of male masters(@barberexpert.ru) Sep 14, 2017 at 10:36 PDT

Women achieve this goal more easily. Curls and curls hide some of the mistakes of an amateur hairdresser. But men's hairstyles require clear contours to look decent, smooth transitions from one hair length to another, which cannot be created without special devices. Therefore, creative housewives and cheerful young mothers who cut their beloved household members’ hair on their own should buy a good hair clipper. Not a cheap device sold in a stall near the market, but a real quality item with comfortable ergonomics and a variety of attachments. With their help, both classic and extravagant models are created. All of them can be classified depending on the method of execution.

Haircut under 1 mm

In traditional men's hairstyles This minimal attachment is used to shape the lowest hairline at the back of the head., but now the possibilities of its application have become much wider.

Brutal haircut one at a time has been especially popular recently. It is very difficult to distinguish it from the familiar “zero” version, and yet it is a haircut performed with a clipper with a special attachment. It gives men a somewhat stern look with a slight touch of crime. It cannot be said that this makes them very beautiful. But athletes, supporters of a healthy lifestyle and hygienic living procedures value it for its simplicity and functionality.

Most of all this image Suitable for those with the correct head shape, with a high forehead, rounded nape, strong and slender neck. Although people with such appearance suit many other options for men's hairstyles. They work “one at a time” very carefully, slowly moving from strand to strand, section to section, until you achieve the desired result.

To create such a look, you do not need other hairdressing tools. But if over time there is a need to change your style and, along with it, your hairstyle, you will need well-sharpened scissors, a thin comb and a compact hair dryer

Men's haircut under 2 mm

Another version of the sports-applied style hairstyle is created with a two-millimeter nozzle. You can also start it with a “one”, then moving on to a “two”.

This attachment leaves hairs slightly longer than the previous version, but the resulting hairstyle is no less practical. She has a lot of advantages:

• Just wash your hair and dry it quickly;
• they don’t need expensive shampoos and conditioners;
• in the heat you will feel fresher, and in winter you won’t have to worry about your strands getting crushed under your knitted hat.

Posted by Daniil Rusalejev (@daniil_style) March 10, 2017 at 7:20 PST

Two-millimeter paper paired with a single one will be useful when decorating the temples. They are in the foreground - on the contours of the cheeks, not far from the eyebrows - and are a very important element that can decorate or ruin the entire look. Therefore, you need to work on them especially carefully, without rushing and without taking risks. Having gained some experience, it will be possible to perform this procedure much faster, but at first it is better to move forward in microscopic steps. Even experienced craftsmen in this case “do not cut from the shoulder,” but act on the principle “Measure ten times, cut once.”

Men's hairstyle under 3 mm

This is well known to many generations of men "Boxing" and "Poluboxing". Previously, such hairstyles were more often worn by military personnel, geologists - those who do not have time to take care of their appearance and at the same time want to look collected and fit.

Today photo of three-piece haircut often found in glossy magazines for stylish men. This option is often chosen by successful businessmen who want to emphasize their energy and determination. It looks very organic with a business suit, giving the wearer the necessary touch of assertiveness and slight aggressiveness in some negotiations.

Traditional C-haircut runs very quickly. Having stuffed your hand, you can finish everything in a maximum of 18 minutes. By smoothly moving with the desired attachment over the entire surface of the head, you can achieve the effect of a velvet cover, even and smooth.

Men's haircut with clipper

You will have to work longer on “Polubox”. Here you can go two ways:

• remove hair on the temples and back of the head in “one piece”;
• treat the crown with nozzle No. 4.

In any case, it is important to get a sufficiently contrasting transition between the top and bottom of the hairstyle. The most trendy options add bangs and even tiny ponytails that puff up over the neck or back of the head.

Publication from Training of male masters(@barberexpert.ru) Sep 12, 2017 at 3:50 PDT

Haircut for guys under 4 mm

This hairstyle is also many years old. Once upon a time it was a distinctive feature of the appearance of bespectacled scientists and romantic students, then it was worn out of habit, and not so long ago it again became one of the off-season hits. Familiar from old movies "Hedgehog" returned to our everyday life. Now it is worn mainly by young guys.

Despite its apparent complexity, “Hedgehog” can also be done at home. But before you get down to business, you should critically evaluate your own hair. If they are thick, straight and hard, the haircut will look perfect, for soft and curly ones it is better to choose a different hairstyle. Otherwise, you will have to constantly wear a certain amount of styling gels, waxes and varnishes on your hair.

Here, too, you will need several attachments - the minimum ones for edging and the main one - four millimeters - for the main trimming on the top, back of the head, and above the forehead.

In the traditional versions of the Hedgehog, bangs are not provided. It is an integral part of the total hair mass. Modern young people want to see themselves as more original, and therefore make their own adjustments to their hairstyle:

• cut bangs;
• comb it to one side;
• decorated with “torn” strands;
• They leave a long thin “tail” on the back of the head.

Haircut with clipper

Men's haircut under 6 mm

It has similar features to “Hedgehog”, it is based on the legendary “Tennis”, but the overall impression is completely different. Uniqueness and individuality "Beaver" haircut give:

• square shape;
• flat top, resembling a flat platform;
• The sides and back of the head are cut to transparency.

You need to take on such a haircut only when the home hairdresser has no difficulties working with different attachments and transitions from the microscopic size of the hairline.

When creating this hairstyle, haste is especially contraindicated. Otherwise, the result may not be a fashionable look, but separate “shreds” that do not merge into a single image. Then the situation will be saved only by a haircut “to zero”

One more word of caution. It is better to “hide” the scars on the back of the head (which, of course, adorn a man) under the Hedgehog, but on a well-shaped head, the Beaver looks very impressive. Young people often add bold touches to their hairstyle - bangs combed to the side, an elongated nape, which is sometimes styled with a hairdryer.

Let's talk about another 6 mm haircut, where the arsenal of expressive means becomes wider, several attachments are used in the process, and the length of the strands reaches from 3 to 6 cm. We are talking about new trend of recent years - Tomboy men's haircut. The basis for Tomboy was the half-forgotten male bob, which was “overgrown” (depending on the version) with either elongated bangs, combed to the side, or naturally shaggy strands at the back of the head.

Stylists believe that in the next few seasons this haircut will become the most popular, so there is a reason to take a closer look at it and start mastering its elements now.

Men's haircut under 9 mm

This haircut cannot be done without a smooth transition from one hair length to another. If the strands on the parietal or occipital part of the head are too long, the excess can be removed with scissors or the largest attachment, and then you can proceed to step-by-step processing of different zones - parietal, occipital, crown, temporal.

Professionals do it like this:

• decorate the back of the head;
• from it they pass to the sides and temples;
• then start cutting the threads

Nine mm nozzle often used when treating the back of the head, but is quite suitable for the crown of the head. The hair on the forehead is cut last. Depending on the individual characteristics of the appearance, men leave them longer to comb to the side, or slightly raise them using thinning.

Haircut with 12 mm nozzle

This is real step-by-step work. You can’t start doing it without washing your hair and going through it with a fairly thick comb.

When starting a haircut, you can't do without scissors. Clamping individual strands with your hands, you need to remove the excess, and then calmly move on to the attachments. The experience gained from simple hairstyles will tell you which one to choose for decorating the back of the head and making transitions from one hair length to another.

In today's hairstyles, the back of the head, cut with the smallest attachments, prevails. If we plan to make it especially expressive, we can approach the top of the head with twelve-millimeter paper. She's the same useful for romantic strands on the crown, which will beautifully lean back or fall to the sides.

Haircut with a clipper with a 12 mm nozzle

Video tutorials for men's haircuts with clippers at home

This is an excellent visual aid for those who want to master the art of hairdressing. On the Internet you can find many more videos with master classes that will help you with the basics of hairdressing. By watching professional and amateur videos, you can master the techniques of qualified specialists and become a real assistant stylist for your household. And spend the money saved on salons on going to the park or cinema together.

Conclusion

Performing a men's haircut of various levels of complexity is not at all difficult, especially if you know where to start and have the necessary equipment on hand. To do this, a home stylist needs:

• high-quality hair clipper (preferably from well-known manufacturers);
• sharp scissors;
• a pair of combs;

Add to this the desire to see your loved ones beautiful and your love for them, and your work cannot be surpassed by any famous coiffer.

September 27, 2017, 00:08