19.03.2021

Watch how to make a plasticine bow. Plasticine crafts for children


print Thanks, great lesson +22

Sculpting from plasticine is liked by children and adults. Doing something with your own hands is very useful for development fine motor skills The child has. Today we will make a bouquet of flowers, which can be a very touching gift from a child for mom or grandmother on March 8th. Let's start creating a bouquet.

Other lessons on flowers:

Step by step photo lesson:

For manufacturing, we need plasticine of 3 colors:

  • pink;
  • green;
  • red.

Take green plasticine and roll it all into a thin sausage. Then, using a special stack or a kitchen knife, cut the sausage into 7 pieces of the same size. These will be the stems for our flowers.


Now let's make roses. To do this, roll the pink plasticine into a thick sausage and flatten it along its entire length. Then roll it into a spiral.


Attach the resulting rose to one of the stems.


We need to make 7 such roses, according to the number of stems and attach flowers to them.


Now we will make a bow from red plasticine. To do this, roll a ball from one piece and attach it to the stems, as in the photo.


Roll up 2 sausages from the remaining plasticine: one thicker and the other thinner. Cut each in half. Flatten the thick ones like roses and make loops: simply by connecting the 2 ends to each other. Roll the thin ones into a spiral, but not completely, so that there is room for attaching to the ball. Our bow is ready, it remains only to attach the loops on both sides of the ball, and on the bottom there are 2 small spirals, as in the picture.
That's all! Our holiday bouquet is done! Good luck with your craft!


Do you love this lace bow but don't know how to make it or where to start? Then come to our master class of modeling clay "Lace bows" and we will tell and show all the steps to create this beauty! Ready? Then let's get started!

For the master class we need:

White polymer clay CLAY CRAFT by DECO
- red acrylic paint
- gel "liquid plastic" for gluing surfaces
- toothpick
- a few beads

Are all materials included? Then let's start the master class of modeling from polymer clay"Lace Bows"

Tear off two small pieces from the clay and roll into droplets


We decorate the edges and top with a toothpick






Now we roll up pink droplets, which should be less than white ones. Pink color is obtained by mixing a drop of red acrylic paint with white clay


Flatten and gel glue on white lace


We continue the master class from polymer clay CLAY CRAFT by DECO. The tails of the bow are done, it remains to make the ears. To do this, we will form two rhombuses from clay


Let's issue






And connect the edges, fixing them together with a gel


Our product is almost ready


Let's make a knot - a circle of pink clay. And according to the picture below, glue the tails and ears of a polymer clay bow to it


Decorate with beads. All! The master class from polymer clay "Lace bows" is completed! As you can see, there is nothing complicated in modeling from polymer clay. We wish you successful creativity!

how to make earrings in the form of a bow with your own hands using plastic or polymer clay.

Carefully cut out our stencil for the future bow along the contour.


We take any two colors, mine is a fluffy pink and the same pink, mixed with a white top coat in a ratio of about 20/80. (this is the easiest way to make different shades of the same color)


roll out on the PM, I have on the 6-ke, if you want to be stronger, you can also on the five.


roll our stencil - small to light, large to dark color. For one earring you will need 4 large and 4 small petals and two "pants"


cut along the contour and begin to carefully assemble.


smooth the edges of the petals with your finger so that they are not unnaturally angular.



All children love to watch a cartoon about Funtik, a merry pig, who was naive and honest, but he was deceived by the insidious Belladonna. Funtik is a smart pig who loves the circus so much, and he was even lucky enough to meet a real magician. Let's make our favorite character out of plasticine. If you think that it is rather difficult to do this, then we will try to convince you in this sculpting lesson. The modeling steps described in some detail will simplify the task as much as possible, focusing on our tips. You will definitely show the children a wonderful master class on sculpting the Funtik pig.

Plasticine colors for sculpting a hero:

  • light pink;
  • hot pink (fuchsia);
  • white;
  • green;
  • blue;
  • brown.

1. Stock up on the necessary plasticine colors to get an exact copy of your favorite cartoon.

2. Roll up a soft pink ball, which later needs to be turned into a charming face Funtik.

3. Stick two small bead-cheeks on the ball, place a round flattened nose between them.

4. Stick a pink patch on the flat part of the nose and cut out the nostrils and mouth with a stack.

5. Attach blue eyes above the nose.

6. Attach a tousled bang, and put a white panama on your head.

7. Start sculpting the lower part of Funtik with pink pants. Roll up the bar.

8. Cut one side of the bar.

9. Attach blue shoes to the bottom of the legs, and a small hook-tail on the back.

10. Add white clay on top. Attach short sleeves.

11. Make a large bow from green plasticine and attach it to your chest.

12. Connect the head to the rest of the workpiece.

13. Pull the pale pink plates into thin tubes. Flatten each tip with your fingers and cut through the fingers on the formed palms. Insert your hands into the sleeves.

Many women love to serve cakes that they made with their own hands for tea at various holidays. A mastic bow will become a magnificent decoration for wonderful sweets. Now we will analyze master classes on creating cakes with bows.

Mastic is similar to a simple sweet mass that resembles plasticine. With the help of cream, you can make different figures, the appearance and shape of which will be made more and more difficult and unusual with the acquisition of experience and skills.

Over time, to decorate a luxurious cake, you will be able to mold an elegant girl out of mastic - if an event such as a bachelorette party is planned, or just a birthday girl - especially female you like. If the hero of the occasion is a man, a shirt can be made from mastic. For New Year's table a bottle of champagne will come in handy - it can be a cake decoration and the cake itself can be made in the form of a bottle and decorated with mastic.

First you need to know how mastic is made, and try to create the first decoration in the shape of a bow.

The ingredients used to create the sweet mass may be different. Milk mastic is made by mixing dry and condensed milk. Many masters make a lot of kefir, mixing it with powder and lemon juice.

To create sugar mastic, you need to soak the gelatin in cold water for a couple of hours. After everything swells, melt the gelatin in a water bath, then cool and mix with citric acid.

Choose a color

Before creating a bow from mastic, you need to decide on the main color. It depends on what kind of cake you want to end up with. The color of the bow should be the same as the dessert (a little darker or lighter), or bright and appropriate.

After choosing the color of our delicacy and future decoration, the mastic itself is divided into a certain number of parts, dyes are added to them and mixed thoroughly again.

Gallery: mastic bow (25 photos)

















Master class on creating a regular bow

A cute and beautiful bow is obtained when working with this method.

For work we need the following materials:

Stages of creation:

  • We create a ball from cotton wool, which we then wrap with a roll of paper. These actions will not allow the roll to wrinkle during the work process.
  • We create two thin strips of mastic, working with a rolling pin. We make the edges uniform by cutting them with our scissors.
  • We take one strip, throw a roll of cotton wool on top. We smear the mastic with water along the edges with a thin brush.
  • Throw a strip of mastic on the roll so that its edges are evenly joined from below.
  • Moves on to making a bow. To do this, fold the glued side of the strip into an accordion and coat the layers with water.
  • In the same way we create the second part of the bow. Then we attach two blanks, holding them a little with our hands.
  • From a small strip of mastic we create an accordion, with which, further, we wrap the bow, cutting off the excess with scissors. We will pull out rolls of cotton wool and attach our decoration to the area allotted to it.

Making a big bow

In this master class, we will analyze how to make a voluminous bow on a cake with your own hands. Sweet mass must be created dense and quick-drying. good option there will be milk cream.

What we need to work on this bow:

  • Mastic.
  • Rolls of foil and various films.
  • Rocks of different types.
  • Figured roller;
  • Knife.
  • Ribbon.

Stages of creation, step by step:

  • We make a pattern depending on the size of the desired bow. Roll out the mastic in a thin layer and cut out according to the detail scheme. For a voluminous bow, at least twelve large petals are required.
  • To get a bright bow, it is better to make different details. Therefore, we create six simple yellow petals and six pink petals with patterns, which were obtained thanks to the figured rolling pin. You can also use a figured roller to make a pair of thin red petals. Let's make them in the amount of ten pieces.
  • Gently powder the cut parts on the inside and leave them to dry well. It will be better to put them on rolls of special film or foil, avoiding a hard bend. The ends of the petals of the bow need to be glued.
  • After the parts have dried, let's start assembling the bow. You do not need to immediately glue the petals, it is better to start by trying on.
  • There should be three layers. We will lay out the first of six large petals, the second of four petals. The final row will consist of 2 parts. We drag thin red petals between large petals. They will give the bow more volume.
  • If, after preliminary work, the appearance of the product suits you, we slowly disassemble it. Then we assemble again, connecting the parts together in the central part. Instead of “glue”, you can take the usual cream for mastic or chocolate, which you need to put in a slide in the center of the composition.

Mastic for cake at home

We talked about how to make a cream from different ingredients for a cake above. However, it is worth noting that to create a bow, you can take another unusual basis.