Fur products, like any other wardrobe items, periodically need to be put in order. Of course, at home, not everyone knows. Most of the time, we turn to professionals for help. You can clean fur products in special establishments, such as dry cleaning. But at present, dry cleaning services are quite expensive and not everyone can afford it, and it is also unknown how your things will be treated in such establishments. In order to be sure that everything is in order with winter things, there is nothing better than cleaning the fur at home.

But for this, of course, it is necessary to learn a few practical advice to bring outerwear in order. So, for example, cleaning is conditionally divided into three types: cleaning of fur hats, collars and outerwear (fur coats and coats). And each type of product requires special care. But there are universal tips that are suitable for any of them:

• It is necessary to prepare a mixture of vinegar, water and alcohol in a ratio of 1: 1: 1, and then gently brush it on the fur in the direction of growth of the villi with a brush. After that, the mixture must be blotted with a clean cloth.
• Wheat should be heated or and then applied to the fabric. After that, carefully clean them with a brush. Then you need to shake and smooth the fur product.
• To get rid of grease stains on fur and down, it is best to use gasoline. It should be applied in a thin layer along the growth of the hairs of long fur and against the growth of hairs of short fur.
• How to clean fur at home without using gasoline? You can make a mixture of ammonia and salt in a ratio of 1: 3 (you can measure with a teaspoon). Then add the mixture to ½ liter of water. It is necessary to treat the fur with the resulting solution. Then wipe with a damp cloth.
• There is nothing easier than cleaning fur at home using regular hair shampoo: one tablespoon is diluted with a liter of water. With the resulting solution, you need to clean the fur product, but very carefully so as not to wet the mezra, otherwise you can ruin the fur thing.
• If the fur is stained with any stains, you can use medical and ammonia to clean it in equal proportions. After applying the solution to the fur, it is necessary to wipe it with a wet cloth and dry thoroughly.
• A mixture of ammonia, salt and pure water in a ratio of 1:3:50 helps to get rid of stains of various kinds. After treating the fur with a similar solution, the product is wiped with a clean, damp cloth, dried thoroughly and combed.
• If the fur is not stained, but simply dusty, it is necessary to cover it with a wet rag and knock it out. The same method can be used if you do not know how to wash
• To give the fur a glossy sheen, you need to wipe it with a cloth previously moistened with vinegar extract. The same effect can be achieved if the fur product is periodically moistened with glycerin.
• Felled fur is quite easy to return to its original state and appearance. You just need to wipe the fur with alcohol, smooth it, and then comb it according to the growth of the villi.

When cleaning fur, be sure to remember the safety rules when working with toxic and strong-smelling substances, such as gasoline and vinegar solution. All work must be carried out only in a well-ventilated area away from heating devices and flammable materials. It is also forbidden to smoke while cleaning fur products and to be near a smoking person, because fur is a highly combustible material that ignites from the slightest spark in a split second.

By following these rules and tips, you will not only be satisfied with the results of the work performed, but also save money.

During operation, the fur can get dirty, fade and turn yellow. After that, of course, it needs to be cleaned.

Many people think that dry cleaning is the only way to restore faux fur to its original look, but the chemicals used in dry cleaning can stiffen faux fur.

Before choosing any method of cleaning faux fur, you should study the recommendations on the product label, which will help you determine the best method and do it right.

There are many options and means of how to clean an artificial fur thing, of which we can distinguish:

• soap solution;
• composition of hydrogen peroxide with water;
• special liquid products for washing;
• a solution of soda and alcohol;
• use of blue.

Invalid ways

Many thematic Internet resources offer a combination of gasoline and starch as one of the ways to clean artificial fur products, which even as a combination is strange.

The use of this combination to remove soiling and stains is extremely doubtful, but Strong smell it will be quite difficult to withdraw for a long time. Also, from the use of gasoline, the pile may turn yellow.

Another method that should cause alertness involves the use of lemon juice.

This ingredient in cleaning faux fur can simply change the original color of the product.

It is also unacceptable to use such cleaning agents as acetic acid and acetone on fur, however, a weak solution of vinegar is acceptable to add shine.

How to clean a faux fur coat at home

If you are going to clean a faux fur coat at home, you need to take into account the specifics of the material of the product and know some of the nuances of cleaning.

1. Faux fur should not be exposed to high temperatures, as this can lead to a softening of the base and, as a result, deform the product. Heat also not in the best way will affect appearance pile, which will lose its gloss.
2. Dry cleaning, in most cases, is the optimal and more correct method to get rid of pollution. The wet version should be used as a last resort and only if the base of the fur coat allows it (for example, it is made of leatherette) and the pile is thick and short.
3. The use of a centrifuge for subsequent drying of a fur coat is strongly discouraged. There is a high probability that the product will simply be wrinkled and the look will be far from marketable.
4. After any cleaning or washing, faux fur becomes shaggy and sticks out in different directions. This is explained by the fact that the pile simply does not have a specific growth direction. That is why, after processing and drying, it must always be carefully combed with not too frequent teeth or a special brush.
5. Faux fur does not tolerate moisture, and even more so it is not advisable to get into such clothes in the rain. A wet fur coat made of this material can easily lose its shape, so if the fur coat gets wet, it must be dried, and then treated with specialized products or a hair product that contains keratin and no alcohol! After all the procedures, the pile is necessary, otherwise it may fade and curl.
6. Drying should occur naturally, preferably in a sunny place, but not under direct rays. You should not speed up this process with various devices.

If for cleaning a product in which artificial fur is present, it was decided to use washing machine This must be done according to the following rules:

• the fur coat is loaded into the washer and the “pre-soak” mode is turned on;
• after that, you need to enable the option "gentle wash". At this stage, it will be correct to set the washing time not exceeding 30 minutes, so as not to damage the material;
• if there is a “gentle spin” function, you need to use it. If there is no such option, it is better to turn off the spin at all, and wring out the wet thing without manually twisting or pinching it;
• next step, the fur coat is hung out to dry in a room with intensive air circulation;
• after drying, the fur is combed.

Hand washing is done like this:

• the existing spots on the fur coat must be rubbed with soapy water or a special gel;
• then the thing needs to be soaked for no more than 20-30 minutes and proceed directly to the wash. Water should not be hotter than 35-40 degrees;
• when washing by hand, hard friction, twisting and stretching of the product should be avoided;
• after washing, rinse the fur coat thoroughly (maybe several times). You need to start rinsing in warm water, and finish in cool;
• after carefully wringing out the thing, you can blot it with a towel or other dense soft cloth and hang it out to dry. Do not use heat sources.

Specialized funds

For cleaning faux fur, care products for carpets, upholstered furniture and liquid laundry solutions may well be suitable.

Some of these surface cleaners include:

• Vanish. Removing greasy stains, various drinks (juices, coffee, teas) and most stains of domestic origin are not difficult for this product;
• Emsal Tuba is an ecological cleaner. Handles dust and fresh dirt well. Suitable for cleaning synthetic materials. Eliminates various odors;
• Amway. For this means of pollution of any complexity is not a problem. Thanks to some of the components that make up its composition, dirt is prevented from sticking to the material, which allows it to stay clean longer. After a while, the foam of this product transforms into crystals, which are easily combed out of the fur, knocked out with a clapperboard or removed with a vacuum cleaner.

Cleaning fur with soapy water

This method is suitable if the fur base is synthetic, knitted simply sits down. This method consists of the following steps:

1. chlorine-free washing powder (two tablespoons per 1 liter of water) is added to a container with water (no more than 40 degrees) and dissolved until foamy;
2. the product is placed on any crossbar and foam is applied to it with a sponge in the direction of the pile;
3. After that, the foam is removed with a damp cloth from natural fabric, and moisture is removed with a towel;
4. during the drying process, you need to look after the correct direction of the pile, because in what position it dries, so it will be worn;
5. the final stage consists in combing the product.

Remove oil stains with baking soda and alcohol

With stains of fatty origin, soda and alcohol will help to cope. This will require a mixture of them in a ratio of 3 to 1, added to a liter of water. A clean sponge is soaked in this solution and applied to the fur. Wipe with a clean cloth and dry.

How to clean white faux fur

White faux fur can be cleaned in the same way as fur of other colors, for example, using the method described above with soda and alcohol.

Along with brushing for bleaching light furs from dullness or yellowness, several other methods will help.

Peroxide

This method is the easiest way to bleach white fur. Hydrogen peroxide is diluted with water (10 g per 500 g, respectively), mixed and poured into a spray bottle, after which a fur coat is sprayed with it, dried and combed.

Blue

If the pile has become yellow, the blue will help to give the primary whiteness to the product. Before using this option, it is better to check the reaction of the fur to the product. Blue is diluted in water until a light blue tint is obtained, collect the resulting solution in a spray bottle and spray the fur.

We clean the fur from dirt and dust

Cleaning faux fur from minor contaminants like dust can be done with a vacuum cleaner with a nozzle for cleaning furniture.

Also, to get rid of natural street dirt, you can knock out a fur coat with a carpet clapper, laying a fur coat on a moistened sheet, fur down. Or use a special brush and comb out the dirt.

Bringing back the natural shine

To restore its former shine to artificial fur, you can wipe it with a cloth moistened with glycerin.

An ordinary hair shampoo diluted in water will help to freshen up a fur coat and give it shine. It is applied to the fur with a cotton pad, aged for several minutes and removed with a disk, but already moistened with water.

Table vinegar (for example, apple cider vinegar), in the form of a weak solution, is also able to restore and enhance the shine of the fur. Its use is similar to the methods described above.

Faux fur care

1. For a decent look of a faux fur product, it must be knocked out at least once a month from dust from the inside, and cleaned from the outside with a clothes brush.
2. The fur coat should be stored in a ventilated place, in a hanging position and preferably not right next to other clothes, this will get rid of bruises in the pile. For long-term storage, it must be closed with a paper case or bag.
3. Bags should not be worn on the shoulder over the shoulder and on the sleeve. Faux fur wears faster than natural fur, besides, it falls off, and will look shaggy, and baldness may also appear.
4. Fluffy pile can be smoothed once a week with a comb, and short - with microfiber.

Precautionary measures

1. Any option for cleaning faux fur should be tested on an inconspicuous area first to determine its reaction to the cleaning ingredients.
2. It is strictly forbidden to use powders for industrial use against rust and other aggressive substances.
3. During cleaning procedures, make sure that all products in vials, containers, jars are closed and kept away from the fur coat.

An otter or beaver fur coat will last you the longest: up to 20 seasons. Slightly less durable mink: 10 seasons. Squirrels and rabbits have the shortest lifespan: 2–4 years. But at proper care fur things can keep gloss much longer.

How to understand that the fur is dirty

Spots and yellowness are immediately visible. To determine the degree of general contamination of a thing and find the most greasy areas, a test with a hairdryer will help.

Hang the fur coat on a coat hanger and direct the cold air from the hair dryer onto it. Do the villi scatter freely, and then easily fall into place? The fur is clean. If not, it needs to be cleaned.

But first, remember that in no case should you do with fur products.

Taboo when cleaning fur

1. Fur cannot be washed! If the mezdra (the skin that holds the fur) gets wet, it can become rough and cracked. In this case, the product is deformed and bald.
2. The fur must not be dried with a hair dryer, on a radiator or in direct sunlight! You can only outdoors or in a well-ventilated area.
3. Fur is not allowed! Even from the inside out.
4. Fur cannot be cleaned household chemicals for removing rust, washing powders with enzymes, bleaches.

Before using any other product, test it on a small, inconspicuous area of ​​the product. For example, under the arms.

How to get rid of dust

Even in a well-closed case, a fur coat or vest can become dusty. Therefore, before putting away the fur item for storage, as well as before wearing it, refresh it.

Spread a damp white cotton sheet on the floor. Put a fur coat on top and knock it out well, first on one side, and then on the other side. After that, hang it on a coat hanger and comb it.

If the fur is tangled and matted, spray the item with warm water from a spray bottle and let it dry. Then comb. The pile will fall into place. For the same purpose, you can carefully walk on the fur with a steamer.

How to restore shine to fur

To make a fur coat or collar sparkle in the sun again, treat them with a solution of lemon juice or table vinegar (not essences!).

Dilute lemon juice or table vinegar in water in a ratio of 1: 1. Use a sponge or soft natural cloth to process the fur. It is important that the sponge or rag is well wrung out. The pile should not be wetted, but wiped.

When the product dries, comb it. The effectiveness of this tool is especially noticeable on the mink.

Another way to bring back shine to fur is to use walnuts. Grind the kernels, wrap them in gauze and rub the fur. The released nut oil will refresh the look of the product.

In most cases, the measures described - knocking out and returning shine - are enough to make a fur coat, hat or vest look like new. But with natural fur, more serious problems can arise. It can turn yellow, greasy, stained.

How to get rid of yellowness

Over time, light fur, as well as fur with white pile at the tips (silver fox, chinchilla and others) acquires a yellow tint. The product immediately loses its presentability.

There are several ways to clean the fur from yellowness.

1. In a glass of warm water, dissolve 1 tablespoon of table salt and ½ tablespoon of ammonia. Apply the solution with a well-wrung soft cloth. Dry and comb.
2. Dissolve 1 tablespoon of hydrogen peroxide in a glass of warm water. Apply the solution to the product, let dry, comb.
3. Dissolve 1 tablespoon of pet shampoo in a glass of warm water. Beat the foam and use a sponge to apply it to the pile. After 5 minutes, remove the foam with a sponge or cloth soaked in clean water. Dry and comb.

Products with a short pile can be wiped both on wool and against it. Cleaning products are applied to long fur according to its growth, after which the pile can be ruffled.

When removing greasy deposits and stains, color is also important. natural fur.

How to clean white fur

Starch, talc and semolina help fight greasy and greasy spots on white fur. They absorb dirt and odors.

Take starch (semolina or talc) and pour it on the contaminated area. Using a soft brush, distribute the substance between the villi or gently rub the fur with your hands, as if you were washing it. Shake the item well to remove any residue.

The dirtier the fur, the darker the starch, talc or semolina will be. The procedure must be repeated several times until the substance stops getting dirty.

It is even more effective if starch, talc or cereals are heated before cleaning. This can be done in a dry frying pan or in the microwave.

It is important to remove all residues of the product, otherwise it will become food for moths. Therefore, the product can not only be shaken well, but also vacuumed with a low-power vacuum cleaner. For example, one that is used to clean the keyboard.

How to clean dark fur

To combat pollution on dark fur, the same method is used, but with different absorbents.

1. Rye bran. Suitable for coarse fur (nutria, goat, wolf).
2. Sawdust. Ideal for muskrat and otter fur. But in no case should sawdust of coniferous wood be used: they contain resins.
3. Sand. It copes well with dirt on the fur of mole and beaver.

How to remove stains from fur

Spots on fur clothes can have a different nature and origin. For example, natural suede bags willingly give color to fur when worn on the shoulder. You can get dirty with sauce when you eat on the run, or put a blot with a clerical pen.

You can remove a stain from dark fur with gasoline (white will turn yellow). Refined gasoline with a high octane number. Sometimes it is applied in its pure form, but more often mixed with starch or washing powder without enzymes to the consistency of sour cream. A couple of minutes after application, the mixture must be removed with a sponge dipped in clean water, and the product should be dried and combed.

Stains from light fur can be removed with acetone or alcohol, as well as mixing liquids with starch or baking soda.

The stronger the dye and the older the stain, the more difficult it is to deal with it at home. If these methods do not work, do not experiment: take the fur coat to.

How to care for mezdra

If you notice that the leather base of the fur product has coarsened, do the following procedure.

Dissolve a little glycerin or vaseline with egg yolk in a liter of warm water. With the resulting mixture, wipe the product from the inside out. Lightly remember and stretch the core. Then remove the rest of the mixture and lay the item to dry inside out.

How to clean faux fur

With faux fur products, everything is easier and more difficult at the same time.

Easier because they can be washed. Preferably by hand, but it is also possible in a machine with a delicate mode (up to 40 degrees, up to 600 revolutions) using gentle powders and without wringing.

More difficult, because it is difficult to guess with a mechanical cleaner.

Do not use vinegar or acetone to clean faux fur.

Otherwise, you can use all the same methods as for natural fur.

Do you know other life hacks for caring for natural and faux fur? Share them in the comments.

A fur coat made of natural fur is the ultimate dream of every fashionista, because this special thing looks expensive and presentable. Although today it can be perfectly replaced by high-quality artificial material. However, luxurious clothes require delicate care. The cost of services of modern dry cleaners in relation to fur products is prohibitively high, besides, no one guarantees a successful result. Therefore, the owners of such magnificence should know how to clean a fur coat at home from natural fur. Artificial, in turn, also requires some attention.

Our article with video describes the main methods of cleaning and gives useful recommendations that will help restore your favorite clothes to their former gloss, color and well-groomed appearance.

When to clean outerwear

Even the most expensive and high-quality thing can sooner or later be wrinkled, rubbed, and dirty. No exception and decoration made of animal fur. Such a product must be monitored carefully and scrupulously, it must be cleaned or restored in time.

Signs that it is time to put the fur in order are the following factors:

• The manifestation of uneven color of the product.
• The presence of visible particles of debris between the villi.
• Plaque and dust pollution, as well as stains.
• Clumped fur.
• Loss of shine.
• Stale smell.

Advice: hang the fur coat on a hanger and direct the air flow from the hair dryer onto the villi. If they are easily scattered, then cleaning is not yet required. With sticking and crumpled fur - it's time for special care.

How to clean dark natural fur

A quick and budgetary way to restore such a product to its original appearance is to use rye bran or crushed crackers. These products are able to adsorb impurities well. The cleaning process is as follows:

1. Pour thick food powder into the villi of a fur coat.
2. Thoroughly but gently rub the fur between the palms.
3. Shake the thing and remove the remnants of the product with a soft brush or a vacuum cleaner turned on at low power.

Such effective method suitable for durable products, for example, from the fur of a wolf, goat, nutria, raccoon.

They also use clean sand, they perfectly remove dust and dirt from a beaver or otter fur coat.

And soft furs, such as muskrat, foxes, need more gentle processing. Small sawdust from trees of different species is ideal in this case. However, you should not use this material from spruce or pine - it contains resins that can only damage the structure of the pile.

How to clean light natural fur

Cleaning white fur is quite delicate and not as easy as it seems at first glance. She has her own secrets and peculiarities.

Use powders that absorb dirt and grease - starch, semolina and talc. These products should be used as follows:

1. Lay the fur coat on a flat surface, with a stain on the front side.
2. Heat the adsorbent in a dry frying pan for 3 minutes.
3. Sprinkle the contaminated area with the resulting powder.
4. Use a soft brush or cloth to spread the product among the lint.
5. With your hands, gently rub the cleanser into the fur.
6. Remove any absorbent residue that has absorbed dirt. To do this, shake the product well several times.
7. Carefully comb the fur coat with a thick comb.

Advice: if immediately receive desired result failed, repeat all the steps until the absorbent to be removed turns white again.

Perfectly removes stains and dirt from light fur clothes, talcum powder or starch (potato), diluted with refined gasoline. It is prepared in the form of a homogeneous slurry without lumps, and then applied with a sponge to problem areas, allowed to dry completely. Then the product should be shaken, the remnants of the mixture should be removed with a stiff brush.

To effectively clean light fur, mix 50 ml of 3% hydrogen peroxide with the same amount of water and pour the solution into a spray bottle. You need to sprinkle the pile, let it dry completely and comb it.

How to remove dust and light dirt

If the fur clothing is dusty, then this problem can be quickly eliminated by performing the following simple steps:

1. Lightly dampen a white cotton sheet and lay it out on any flat surface such as a table, bed, or floor.
2. Spread the fur coat evenly on the fabric with the pile down.
3. Knock out all the dust with small taps using a carpet tool or a rolling pin.
4. Then hang the fur coat on a hanger or coat hanger, dry a little, but avoid direct sunlight, comb the fur.

If your favorite outerwear is slightly dirty, then a solution that is prepared from a mixture of such substances will help restore its cleanliness:

• 2 tsp alcohol;
• 1 tsp table vinegar;
• 100 ml of water.

Wipe contaminated areas with a soft sponge moistened with the product or a clean cloth. After drying, ventilate the product to remove the smell of vinegar, and comb through. To prevent the pile of a fur coat from sticking together, before you start working with a comb, lightly walk over it with a steamer.

Advice: to reduce dust on the fur coat, store it in a special bag for clothes.

Dry cleaning option

The method without adding any moisture involves using only starch, talc, sawdust, baby powder, salt, and a soft brush or cloth.

The algorithm of actions is no different from the procedure with talc or semolina - the fur should be thickly sprinkled with an absorbent substance, left for half an hour, and then shake the product well. Salt, for example, perfectly absorbs oily stains, as well as various street dirt.

Advice: Dry clean your natural fur coat once a month. This will help avoid premature deterioration of the item.

The use of river sand in the cleaning process also refers to dry methods of getting rid of fur pollution.

1. Lay the product on a flat surface. Pour hot sand over it.
2. Rub it thoroughly into the villi, and then shake it off.
3. Pour the component again, and shake out the fur coat again. The procedure must be done until the fur is clean.

Mechanical removal of dirt with a comb or wire brush is also a “dry” method. For greater effect, a piece of cotton wool is put on their cloves.

Wet cleaning options

These include those that use liquid products and solutions to clean products. For example, for a “cosmetic” wet treatment, the following composition is prepared:

• 0.5 l of warm water;
• 1 teaspoon of ammonia;
• drop of liquid powder.

Cleaning should be done like this:

1. Spread an oilcloth or an unnecessary sheet on the table. Lay out the fur product on it.
2. Dampen a soft sponge in the solution and walk over the contaminated pile several times.
3. Wipe off residue with a damp cloth or a clean cloth slightly dampened with water.
4. Dry the product thoroughly, and then carefully comb it.

Important: natural fur should never be washed. The base of the skin, to which the villi are attached, can crack when in contact with water, and the fur can crumble in the future.

How to clean a natural fur coat from yellowness

Yellowing is an unpleasant defect that catches the eye, especially on light fur products. It usually occurs from exposure to direct sunlight or heat. It is impossible to get rid of the flaw completely, but there are several ways to make it less noticeable.

• In 0.5 l of a little warm water, dilute 3 tsp. regular salt and 1 tsp. ammonia. After soaking a rag or sponge in the solution, apply it evenly on the pile. After the fur dry and comb.
• Use hydrogen peroxide (3%). You will need a tablespoon of the drug, diluted in a glass of water at room temperature. Further, the algorithm is the same as in the paragraph above.
• You can sprinkle the pile with a solution of water, alcohol and vinegar in equal proportions. Then blot the surface with a dry cloth.
• The fur is also treated with a slurry of starch and soapy water. The mass is rubbed with hands into the pile, allowed to dry, and then brushed off. The thing needs to be shaken and dried.

Advice: before using any cleaning agent, you should check what its effect will be by treating a small, inconspicuous area of ​​\u200b\u200bthe product.

How to bring back the shine

If a natural fur coat or its collar has lost its gloss, shine, stopped shimmering, then you can return their former presentable appearance with the help of some home remedies.

The solutions are different, but the method of processing the product is approximately the same.

The following substances are effective:

• Lemon juice, glycerin solution. Both ingredients, or separately, are applied with a sponge to the fur. Then remove with a dry cloth.
• Acetic or alcohol solutions in equal proportions with water.
• Composition of 1 liter of hot water, 100 g of fish oil (or pork) and 10 g of soap. After cooling the composition to room temperature, add 10-12 drops of ammonia. The mixture is applied to the fur without rinsing.
• An excellent result of the restoration of gloss is obtained by the method already described above of treating the product with gasoline combined with starch.
• Walnut. The kernels are crushed and placed in a bag of gauze, which is carried along the pile of a fur coat. Fur starts to shine again.

Important: all the described means, except for glycerin, should be applied only to the pile, avoiding their contact with the mezra.

How to clean artificial material

Modern faux fur coats, thanks to new manufacturing technologies, are difficult to distinguish from natural ones. However, it must be remembered that the care of this product must be just as careful, thorough and timely.

To make a complete cleaning of this fur item, stock up on a basin, warm water, a sponge, a rag, powder or liquid soap, and a clean, dry towel. Follow this instruction:

1. Dilute detergent in water (about one tablespoon per liter), beat until a thick foam forms. Apply it with a sponge to the surface of the fur.
2. Lightly rub the contaminated areas.
3. Remove the remaining foam with a damp cloth. After the thing is transferred to terry towel and keep it that way until completely dry.
4. Finally, use a soft brush to comb the pile from top to bottom.

Faux fur clothes can even be washed in the machine, but on a delicate cycle and without using the spin cycle. The thing should be dried in the fresh air, hanging on a hanger.

An effective cleaning solution is also a mixture of alcohol and water, taken in equal amounts (250 ml each) and a teaspoon of glycerin. The composition is applied with a cloth, and removed with a dry washcloth.

How to properly care for a fur coat

Since a fur coat is not only an addition to your image, but also an element of style and taste, it should always look perfect. Please be aware that multiple factors can cause damage to this product, including:

• Wearing things in snow or rain, as a result, the fur sticks together, becomes untidy and scanty.
• Careless use of cosmetics or perfumes. Foundation, powder or lipstick can leave marks, for example, on the collar. Any perfume or toilet water apply on clothes under a fur coat, otherwise the alcohol base will corrode the color of the product.
• Detrimental to fur and friction with bags, briefcases, clutches, belts, jewelry. This leads to thinning of the villi of the fur coat. In addition, some colored haberdashery products can shed and leave stains on a light-colored item.
• If a fur coat has not been ventilated or worn for a long time, and has been in the closet for several months, it can be an excellent “delicacy” for moths.

Compliance with the rules of wearing and storage will significantly extend the life of your favorite thing.

Care according to the type

The first thing to remember is the expiration date of the products. Animal furs different kind are stored each in its own way, and for an unequal amount of time. For example, a rabbit will last no more than 5 years, and you can show off in a fur coat made of arctic fox for 7-8 years. The most durable are beaver and otter. They are worn up to 20 years.

For the best preservation of any type of natural product, the following measures must be strictly observed.

1. The thing must be kept in a dark, dry place, it is best to put on a clothing cover beforehand.
2. It is also recommended to put a proven moth remedy there for the safety of the fur.
3. In order not to damage the fibers and not wrinkle the fur coat, hang it on a hanger. At the same time, do not pinch with other things - the product should hang freely.
4. Before sending fur clothes for long-term storage in a closet, dry them in the open air, but protect them from direct sunlight.

arctic fox

1. Before each exit to the street, comb the fur from top to bottom with a stiff brush.
2. After wet cleaning, dry the furs at room temperature, hanging on a hanger. Never use a hair dryer or radiator for this.
3. When fighting moths, try not to use sprays and naphthalene. The smell is pungent, and is strongly absorbed into the fur, it is then extremely difficult to remove it. It is recommended to purchase tablets or sachets.
4. If you do not know how to clean fox fur and remove dirt at home, then it is better to trust the professionals and take the product to dry cleaning.

Mink

1. The collar of a mink coat requires special treatment. So don't use lipstick or Foundation so as not to stain the fur, otherwise it will be almost impossible to remove such pollution. It is best to wear a shawl or scarf underneath.
2. Mink should never be dried in the sun, it will burn out and deteriorate irrevocably.
3. The owner of a fur coat must take into account the delicacy of the product. Do not stand in lines so that you do not rub against the fur, do not sit on dirty benches and chairs. Do not carry bags or briefcases.

Rabbit, goat, nutria and wolf

1. These products are lighter in weight. This is due to the fact that they have a thin layer of mezdra - skins. Therefore, furs from these animals cannot be worn in the snowy or rainy season.
2. For this outerwear, dry clean only. Use starch or cornmeal. Rub the composition into the fibers, then shake well.
3. Be sure to keep the fur coat in a case with the addition of a small amount of moth repellant, otherwise in winter you will find a thing pretty eaten by insects.

Otter, beaver and mole

The fur of these animals is considered not only the strongest and most durable, but also the most frost-resistant.

1. Natural otter and beaver products are very expensive because of the many positive characteristics and long wear, but you pay a tidy sum for high quality and durability.
2. If you wet the fur, then it is unpretentious in drying. It is enough to place the product near the battery, hanging it, for example, on a chair. After comb the fibers.
3. Over time, things from a beaver or mole can become greasy. Use a solution of alcohol and warm water in a ratio of 1:10 to wipe the fur, then dry and comb it in the same way.

How to store

Pay special attention to the fur thing before cleaning in the closet. Inspect clothing and inspect for stains, soiling, yellowing. If any defects are found, correct. Next, ventilate the thing well during the day. Remember to avoid direct sun exposure.

Stock up on a durable clothing cover and moth repellant - they will help your “darling” wait for the next season. Immediately before packing a fur coat, wipe it with glycerin. This will keep the shine and elasticity of the fur for several months. Warm up the product and rub it in your hands, walk your palms over the entire surface in the direction of the pile. Now the luxurious thing will be preserved for a long time and will wait for the next “publication”.

Important: a fur coat should not be stored in a plastic bag, and other clothes should not be folded on top. Avoid touching things that may shed.

Using homemade or "folk" products to clean and care for natural or artificial fur products, as well as following the recommendations for their proper storage, you will not only prolong the life of your luxury clothes, but also save a lot of money on professional dry cleaning services. However, in complex or neglected cases, it is better to turn to specialists to restore a fur coat damaged by stains or dirt.