Elena Dmitrieva
For Christmas tree making you will need:
Green sequins.
Foam cone.
Carnations for beads.
Beads number 12 different shades.
Hot glue.
Silicone thread.
Christmas tree making.
We start making a Christmas tree that we glue the silicone thread. For her, we will hang a toy on the Christmas tree.
We start to fasten sequins. We take a carnation and put on it 2 beads and 1 sequins. sequins we fix it on a foam base in a circle, starting from the base of our future Christmas trees.
Carefully fill the entire surface of the cone, while trying to keep the gaps to a minimum. You can come in sequins on top of each other, however, care should be taken that all sequins were at equal distance.
Then we begin to fill the bottom of our Christmas trees. To do this, we take a carnation and put it on it. sequins without beads. Posting sequins around.
Carefully fill in the bottom. sequins can go to each other.
Like this we got a Christmas tree.
Related publications:
As is customary on New Year's Eve, in anticipation of a miracle, dress up a fluffy beauty - a Christmas tree! Therefore, we decided to decorate not only one Christmas tree.
New Years is soon! New Year is a long-awaited holiday for everyone, especially for children. And to feel the magic and festive mood.
Scenario of the New Year's holiday "Visiting the Christmas tree" for children 2-3 years old"Visiting the Christmas tree" For children 2-3 years old Children, to the music of "Little Christmas Tree", enter the hall, walk around the hall, sit on the chairs. Presenter:.
Pyatak Alena Sprigs of beads and sequins Master class MASTER CLASS on the topic "Sprigs of beads and sequins" Teacher of additional education.
So the New Year is approaching, the long-awaited and such a magical holiday! There are only a few days left. And what is a New Year's holiday without a Christmas tree.
And even though the New Year has already passed, we still have a New Year's mood! My children and I decided to make a Christmas tree from natural material - pine.
On one of the wonderful days of my care and attention, and most importantly, pleasant communication with my beloved granddaughters, Sashenka brought a set for the children.
Summer is the long-awaited time. What to do with children? Children are interested in everything that you only offer, and even better if you yourself participate in these processes. This.
The Christmas tree is an integral symbol of the New Year, a small craft in the form of a forest beauty can be placed absolutely anywhere, even if there is no place for a large Christmas tree in your house. A small decorative spruce can be made from many materials: wool, yarn, thread, sisal, decorative mesh, paper, or even polymer clay. But today we will tell you how a Christmas tree is made from sequins and beads with your own hands, the photo master class in this article is dedicated to this particular craft. The path of working with such a small material does not scare you, thanks to our detailed instructions, you will definitely succeed, and you will be able to decorate your home with a miniature Christmas tree made of sequins and beads.
To make crafts, we need
- wire;
- green beads;
- green sequins.
Let's start making a Christmas tree from sequins and beads with your own hands
We take a piece of thin but strong wire about 20 cm long. At the beginning and at the end we collect 3 beads. Next comes 1 sequin sequin, then 2 beads, then we collect 1 sequin again. Thus, we collect 6 sequins-flakes.
By the way, you can also weave from beads, which will look great near the Christmas tree.
We twist the ends of the wire, such a loop needs 1 piece.
We create the same loop, only we put on 1 sequin more (7 elements on the loop). We make 3 such loops.
Then we make 4 loops of 8 sequins, and in each subsequent blank we increase the number of loops and the number of elements in them - 5 loops of 9 flat spangles, 6 of 10, 7 of 11.
The next step in our photo master class is to assemble a Christmas tree from sequins and beads. To do this, take 1 loop with six sequins-sequins and 3 loops with seven elements. We put a loop of six sequins-flakes up, and we fasten the loops of 7 shiny flat elements to the upper loop in a circle.
Then we take loops from 8 sequins, etc. ascending elements.
We divide the ends of the stem into 3 bundles and twist them, we get 3 legs, this will be the stand for the Christmas tree made of sequins and beads.
So our do-it-yourself Christmas tree made of sequins and beads is ready, a photo master class was prepared by Lomakina Lyudmila.
2015 brings blue-green colors. This range is always positively associated with natural shades. They appear in water, sky, foliage, grass. Green calms the nervous system, while blue inspires. On this positive wave, I decided to make a Christmas tree out of sequins using blue and green colors. It is very well suited to the New Year's table, as well as a gift. Such beauty will find a place in any interior, cheer up and give a New Year's holiday atmosphere. A do-it-yourself Christmas tree made of sequins, a master class with a photo on the manufacture of which is quite voluminous, requires perseverance. But in the process of creating crafts, you will be charged with positive thoughts and emotions, especially if you do it for people dear and beloved to you. I think they will be pleased to receive such a composition, in the form of a New Year's gift, which you will make with your own hands. I wish you to easily make a Christmas tree from sequins with your own hands and give it to your loved ones with great pleasure, or decorate your interior with it.
To make a blue-green Christmas tree with your own hands, you will need:
- a foam cone;
- blue sequins;
- pins with a green eye;
- blue organza ribbon;
- blue crepe paper (available at any office supply store);
-glue Moment Crystal;
- a small disposable cup;
- a simple pencil;
- green sequins;
- green and blue beads;
- green satin ribbon;
- blue acrylic paint;
- brush for paint;
-scissors;
-alabaster.
How to make a Christmas tree from sequins and pins
Pour the diluted alabaster into a glass and insert a pencil into the center. 
In the foam cone at the bottom, make a hole with scissors, glue the cone to the pencil. 
We decorate the trunk with a green satin ribbon. 
Cut off a small piece of corrugated paper. 
Glue the cut corrugated paper to the cup. 
Now you can start painting the cone.
By the way, it turns out to be very beautiful, which you can also easily make with your own hands according to our detailed instructions.
We begin to paint the cone with acrylic paint from the top. 
We completely paint the entire blank for the Christmas tree from sequins with blue acrylic paint. 
Set the cone aside until completely dry.
While the cone dries, prepare the decorative elements. To do this, we thread it into a sequin in a pin. 
We pin the pins to the foam cone, starting from the top. 
We pin the pins from top to bottom. We leave somewhere 2 cm from the bottom of the cone without sequins. 
We decorate the upper part of the pot with sparkles. 
We cut the blue organza ribbon into strips of about 8 cm. 
Fold the cut organza ribbon in half and fasten it to the foam cone with a pin. 
We make a blue organza skirt for our sequin Christmas tree. 
Thus, we get a fairly fluffy skirt. 
The sequins on the pot are already dry, you can glue beads on them, and glue a green satin ribbon around the pot. 
We tie a bow from a blue organza ribbon and a green satin ribbon, and glue it to the top of the Christmas tree. 
Glue the sequins to the skirt. 
We glue them to each blue ribbon. 
Glue a bead to the center of the sequin. 
Our handmade sequin Christmas tree is completely ready.
Christmas tree with golden nuts.
Materials:
Beads green and brown,
wire 0.4, threads,
floss, for winding branches, and trunk.
stiffer wire for the frame.
gypsum
PVA glue,
decor,
acrylic varnish.
Several tiers of branches, you can repeat, but increase downwards. to create the correct shape. I wrapped the trunk with thread, not all of it. when I put it in a plaster stand (a stand made of gypsum combined with water), the lower part was smeared with a mixture of gypsum and PVA glue (one to one, the mixture is thick, but not very, applied with a brush, or not very thin stick, creating an image of bark). I put it to dry overnight, and in the morning, covered with acrylic paints, the trunk, and the stand. After that, she decorated with moss, stones, beads.
Author luna
Beaded Christmas tree in needle technique.
For work we need:
Bead-cutting 2-3 colors, I took 2 colors, it took me about 80 grams;
wire 0.3 mm - 3 coils, it is advisable to have pliers on hand, as it will be easier to pull the wire.
Our branch will be done according to the following scheme:
"needle" of 7 beads in the center, around it 4 needles of 5 beads (arbitrary alternation of colors).
Then we put 2 beads on both ends of the wire and make the next row of needles, 4 pieces of 5 beads each, then again 2 for passing and another row.
To make a needle, we pass the free end of the wire in reverse through the 4 lower beads, pulling them tightly to the base.
The branch should not "fall apart".
3-4 small branches can be twisted into one large one.
We leave one in the center, this will be the crown, we begin to form a circle around it, carefully braiding the trunk with wire. After all, there will be no trunk as such, the branches fit snugly against the wire in the center.
Make 5-6 rows in a circle for a small Christmas tree, or more if desired.
When the Christmas tree is ready, we will make the base. Do not rush to straighten all the needles, you will do this later.
I need a fairly large base, because the tree will go as a gift and it will be necessary to make an inscription on it, but it can be made smaller.
A box of baby juice came up to me, into which I poured gypsum mortar and inserted a Christmas tree. When the plaster hardened, I cut the box and took out the Christmas tree.
Base decor - according to your desire, you can make grass, you can make snow - anything!
After painting, you can straighten the branches and give the work its final look.
The cabin sparkles amazingly!
And if you put a few drops of spruce essential oil on the base, it will turn into a healing forest guest!
Author Inna Vuymina
Christmas tree from the cabin.
To make one beaded Christmas tree with your own hands, you will need:
Green cabin - 50 gr.
brown cabin - about 5g.
brown wire (or copper) about 50m
alabaster
colored stones (or other decor)
two pearl beads
glass beads
stand
The Christmas tree consists of 10 tiers. Each tier has four branches.
We start weaving a Christmas tree from the top. We cut off a wire 45 cm long. In the middle of the wire, you need to string a gold-colored bead and a group of white glass beads, gold and silver beads, 1 green-colored bead-cutting. Pass the second end of the wire through the entire group. String 4 green beads on each end of the wire:
After that, twist both ends of the wire together for 3-4 turns. At each end of the wire, dial 4 green beads, 2 brown, 4 green, twist into loops.
Twist the ends of the wire 2 turns and make the same two loops as shown in the following photo:
We turn to the manufacture of the second tier of the Christmas tree from beads with our own hands. We cut off 4 pieces of wire 25 cm long. We make 4 branches of them with three loops each with a set: 3 green beads, 2 brown, 3 green.
From loop to loop, twist the wire 4-5 turns, from the last loop 3 turns.
Let's start making branches for the third tier of a Christmas tree woven with our own hands. To do this, from 4 pieces of wire 30 cm long, we make 4 branches of 5 loops. The first three loops, as on a branch from the second tier, in the next two loops, instead of three green loops, dial 4:
As you understand, you need to weave 4 such branches, as in the photo above. After that, we prepare branches for the fourth tier of the beaded Christmas tree. This will require 8 pieces of wire 30 cm long. You need to make 8 branches with five loops in each:
The first three loops, as can be clearly seen in the photo, are the same as on the branch from the second tier, in the next two loops, dial 6 green beads each. After the last loop, twist the wire down 4-5 turns. From two such branches, collect one by screwing them with a spiral for 3-4 turns:
5 tier: from 4 pieces of wire 35 cm long, make 4 branches of 7 loops. The first three loops, as on a branch from the second tier, in the next four loops, dial only 6 green beads.
6th tier of the Christmas tree: we start it in the same way as the 4th tier (8 pieces of wire, 8 branches of five loops each) But we collect the branches in pairs a little differently. It is necessary to cut off an additional piece of wire 20 cm long. From the last loop, wind 12 turns with a spiral with additional wire. Then screw the second branch into 15 turns with a spiral:
Twigs for the 7th tier of a Christmas tree made of beads: cut 4 pieces of wire 60 cm long. Make the first loop in the middle of the wire. Next, dial 6 more loops, as on the 6th tier, on the same end of the wire so that the other end remains long.
After the last loop, twist 6-7 turns. On the other (long) end of the wire, also make 7 loops:
With additional wire, twist the branch with a spiral down 8 turns.
8th tier: cut 4 pieces of wire 60 cm long and 4 pieces of 30 cm each. Twist branches from 60 cm wire, as for tier 7, from 30 cm wire - branches with five loops:
From these two branches, collect one, screwing them with a spiral. First, start a spiral on a branch with two ends - 15 turns, then screw a small branch into 15 turns:
Tier 9: same as for Tier 8, only increase the number of turns of wire from 15 to 18.
10 tier: cut 4 pieces of wire 70 cm each, 4 pieces 35 cm each. Make branches in the same way as for tiers 8 and 9. Only dial 8 and 9 loops in a large branch, 7 in a small branch. Number of turns spiral increases to 22.
Now the branches for all the tiers of our beaded tree are ready, you can start assembling the tree.
Take an additional wire (do not cut off from the coil!) And, starting from the top, wrap the ends of the wire down.
An additional rod is not required, because. due to the number of tiers (and branches in each of them), the trunk thickens and does not bend.
The distance between the tiers is from 0.8 cm (from the top) to 1.2 cm (towards the bottom).
After assembly, it remains to plant the Christmas tree in a stand. To do this, you need to dilute the alabaster and stick a Christmas tree into it, wait until the alabaster dries. Then, using transparent glue, decorate the frozen alabaster soil with colored pebbles, moss, cotton wool with sparkles, and beads.
Here is our resulting green beauty, it even seems that the festive aroma of pine needles is in the air:
A Christmas tree can be made not only from beads or cuttings, but also from glass beads. In addition, the Christmas tree can be dressed up:
Author Elena Bashkatova
Little green tree.
To make a small green Christmas tree from glass beads, you should prepare for work:
Copper wire 0.3mm (for twigs);
- copper wire 0.5 mm (to stiffen the branches);
- aluminum wire 3mm (for the trunk of the Christmas tree);
- green glass beads (for a fifteen-centimeter tree you will need 300 grams);
- floral tape (green or brown);
- PVA glue, alabaster, wood stand.
The Christmas tree shown in the photo can be made in a week, with a load of 3-4 working hours a day. For a set of glass beads on a wire, it is convenient to use an automatic bead stringer.
Initially, we mix all the glass beads in a special container. We begin to collect glass beads on the wire, we collect about 4 meters, without tearing the wire from the coil, we begin to make the first branch.
We put 2 pieces of glass beads put on the wire together. We fix for 1-2 turns. On the other hand, we do the same.
Thus, we should make strips:
4 strips for the branches of the first row and crown of 5 cm.
3 strips for the branches of the second row of 6 cm.
3 strips for the branches of the third row and crown of 7 cm.
We put on a 5 mm copper wire folded in half along the strip, tighten the strip a little (up to about three centimeters - on the branches of the first row), twist everything - the branch is ready.
For the manufacture of branches of the fourth and further rows, we proceed according to the following scheme: From about the fourth to the eighth row, we make branches consisting of two small ones. Try to keep the branches of each new row longer than the previous ones, by about 1 centimeter.
The branches of the remaining, lower rows are made of three branches. In this case, the central branch will be twice as long as the side branches.
It is not necessary to do all the branches in advance. The Christmas tree is not made like all beaded trees. It is more convenient to collect it right away - so you will see how many branches are required in each row, and how long they should be made.
We fix one branch on the wire - this is the trunk and crown. On the sides we fix three small branches of the first order, wrap with floral tape.
Below, stepping back a centimeter, we fix 3 branches of the second order.
Thus, we fix all the branches from top to bottom, wrap the trunk with floral tape. Since the trunk of the Christmas tree will not be visible, it does not need to be painted.
We fix our Christmas tree in a stand, using children's plasticine (for stability). We impose a mixture to fix the Christmas tree in the stand (alabaster 2 parts + PVA 1 part + water). After the mixture has not completely dried, we decorate the pot with multi-colored pebbles, they will stick. The mixture will dry and our Christmas tree is ready!
Fluffy beaded Christmas trees:
Different shades of green beads will come in handy for work.
You can mix different colors, so the Christmas trees will get a special, individual look. One tree requires a minimum of 60 grams of Chinese large beads (number 8).
Be sure to take the wire reinforced, thick, so that it can hardly get into the bead.
Thick copper wire is the key to the beautiful shape of the branches of our Christmas tree.
In addition, we need floral tape, gypsum, gouache, pliers, aluminum wire (for the trunk) and decorative elements for the final decoration of the New Year's crafts.
How to make a Christmas tree from beads. We use a spinner to string the beads onto the wire. It is necessary to collect ALL the beads on the wire IMMEDIATELY.
Let's start weaving in loop technique. The essence of weaving is simple - we need to make a large number of loops from all the beads, constantly increasing their size. We start with loops of 12 beads.
In the second loop we will make 13 beads, in the third - 14.
You can increase the number of beads in the loops, not counting, "by eye".
As a result, such a complex structure should be obtained from parallel-running, constantly increasing loops.
For the crown, we will make a small bud. We weave an element of 5 loops, the legs of which are assembled at a single point.
So that the wire does not attract attention, we will make it invisible. Paint the wire with green acrylic paint, wait until the paint dries.
Now you can begin to form the tree itself. To do this, take a piece of aluminum wire and bend the loop on one side. On the other hand, we will attach the top of the spruce.
It is necessary to securely fix the crown - wrap the entire trunk of the tree with floral tape.
Now we wind the wire with dialed loops. Closer to the crown, you need to place the end of the element with small loops.
We fix the attachment point again with floral tape.
Finally, we can form our Christmas tree! Carefully wrap the wire-barrel with our loops-twigs.
Each loop will have to be gracefully bent, this will give the tree the necessary volume.
Mix gypsum or alabaster with water - from this mixture we will make the lower part of the tree. We pick up a round mold, cover it with a bag, pour the mixture into it, and install a beaded spruce in the center.
When the plaster hardens, the tree can be removed and freed from cellophane.
Let's give the foundation a little rest. For now, let's decorate the crown. For this, multi-colored rhinestones are useful.
We glue rhinestones on branches of beads. We use simple PVA glue.
While the rhinestones are sticking, we will continue to work on the base of the Christmas tree. We will direct a little gypsum mixture and coat the lower part of the beaded Christmas tree trunk with it.
The barrel can be painted with green acrylic paint.
Do not forget about the "bottom", paint it white.
We apply white acrylic paint to the base of the tree.
When the paint dries, let's turn on the fantasy. The base can be varnished, decorative primer and decorations can be glued onto it.
Fairy tree.
We need for 2 Christmas trees
Wire (thickness 0.4 mm length 10m),
beads (10 g),
sequins (20g pack),
scissors,
cork from a plastic bottle,
gypsum,
decor fabric,
braid,
ribbons
We string beads, sequins, beads on a wire 16 cm long ...... 3 branches of 10 sequins each (note that we start with beads and finish with beads, and the sequins should also be convex side in one direction) 5 branches of 15 sequins, 5 branches of 20 sequins, and 5 branches of 25 sequins (10 g of beads and 20 g of sequins are needed for 2 Christmas trees)
I string alternating beads and sequins in a row, and when I twist the branches, count the sequins, I shift the bead, move it away, cut off the desired length (it should not be small, then it’s convenient to twist) and twist the twig, string the next bead, count the sequins, etc.
This is what should happen, we twist the Christmas tree 1 row - a branch of 15 sequins, the second row - 3 branches of 10 sequins, the third row - 4 branches of 15 sequins, the fourth row - 5 branches of 20 sequins, the fifth row - 5 branches of 25 sequins ( if you wish, you can continue 5 branches of 30 sequins each ....). We take a cork from a plastic bottle, dilute the gypsum and fill in our Christmas tree
Author Lyubov Zenkina
Christmas trees made of sequins and beads.
It was convenient for me to string beads with sequins like this: I poured a few sequins into a bowl with beads, "poked" the wire into the sequins and immediately passed among the beads (mostly one of them was strung)
This is how the Christmas tree is going in tiers.
Under each tier, we twist all the wires a little
Here's how I made the stand:
When all the tiers are assembled, we twist all the wires together and string a bead with a huge hole (I had dark wooden ones);
- Carefully unwind the wire BEFORE the beads and divide it into 3 bundles;
- We twist each bundle separately.
We combine the beams, measure somewhere 3 cm and cut off the excess;
- We bend the legs, bend the ends.
These are the kind of sympathizers turned out.
And I decided to experiment with this - I made it from mother-of-pearl sequins-flowers. But since there were few of them, then the number of sequins was reduced, and the number of beads was increased. It worked out well too :)
In this version: we string on a wire: beads (2 pcs), sequins, beads (2 pcs) ... We start with beads and finish with beads.
1st row - a branch of 7 sequins, 2nd row - 3 branches of 5 sequins, 3rd row - 4 branches of 7 sequins, 4th row - 5 branches of 9 sequins, fifth row - 5 branches of 11 sequins.
I offer my own packaging.
So, from a plastic bottle with a narrow neck, cut off the upper part using the "cutting off the excess from the bottom" method. We cover the Christmas tree and see that it is not too crowded "under the dome" and that it does not "flop" much.
According to the shape of the bottom of the finished "dome", we cut out the BOTTOM from plastic for our packaging (put the "dome" on the plastic, circle it, cut it out).
We fasten the bottom to the "dome" with pieces of adhesive tape as follows: in the place where the bottom will be fixed in the open state of the package (photo on the right) - just a piece of adhesive tape, and where we will open the bottom - we leave a "tongue" at the end of the adhesive tape from the side of the bottle ( just fold a piece of tape over and stick it to itself
It is impossible to glue the bottom tightly, because. You can't get the Christmas tree through the neck of the bottle.
Author Yonya
Christmas trees from sequins
We will need:
Beads (you can match the sequins, or you can use a different color)
sequins
braiding wire
hard wire for barrel
winding threads
a container for planting a Christmas tree (I have an ordinary cream stopper decorated with candy foil)
The Christmas tree consists of 17 branches + crown.
First, we string sequins on the wire, alternating beads. Then we count 17-20 sequins and twist the loop. This will be the crown of the Christmas tree
The first row of branches consists of 4 loops of 10 sequins twisted close to each other
Second row: 4 branches of 3 loops. The loop consists of 15 sequins
Third row: 4 branches of 3 loops. The loop consists of 20 sequins
Fourth row: 4 branches of 3 loops. The loop consists of 25 sequins
Fifth row: 4 branches of 3 loops. The loop consists of 30 sequins
When all the elements are woven, we collect our Christmas tree. The distance between the branches during assembly is 0.8-1 cm. After assembly, we plant our Christmas tree in a suitable container, decorate and admire our beauty
Author vfhecz32
Little tree.
For work, we take green and white beads. We collect 11 beads in the middle of the wire in the following sequence: 4 green, 3 white and again 4 green.
We twist the loop.
In the same sequence, we collect beads on one end of the wire
And we form a loop.
In the same way, we form a loop at the other end of the wire.
Thus, we form branches for the top. The branch consists of seven loops. We will need 4 of them (do not pay attention that there are more of them in the photo!) We twist all the branches together and form the top (sorry, there is no photo). We wrap the ends of the wire with floral tape.
And twist them together.
We bend the loops to the edge.
We wrap the ends with floral tape. We need 5 pieces of such blanks for one tier.
When all 5 blanks are ready, we fasten them to our top with the help of florentine.
The top with the first tier is ready!
For the 2nd, 3rd and 4th tiers, weave branches as for the top - from seven loops. For one tier - 10 branches.
We twist the branches in pairs - we get 5 blanks for one tier. Wrap with florentine.
We fasten the branches to the Christmas tree. The second tier is ready! Similarly, we do the 3rd and 4th tier. But for the 5th, the number of white beads in the loop is increased to 5. Those. our loop consists of 13 beads: 4 green, 5 white and 4 green. The number of loops on the branch is 7. For the 6th row, we form a loop from 15 beads: 4 green, 7 white and 4 green.
In principle, your Christmas tree may have more tiers, but it seemed to me that 6 is quite enough. After we have finished the last tier, we select a suitable "vessel" - in my case it is a candlestick. Then we dilute gypsum with water 1: 1 and "plant" our Christmas tree. When the gypsum dries, you can cover it with a shiny varnish and sprinkle with white beads - it will be beautiful. And you can come up with a more interesting decor. Create! New Year is not far off! Please your loved ones with such a New Year's surprise of your own making!
Author mari-m26
New Years is soon.
To do this, we need beads, wire cutters, wire and always a good mood.
String beads and twist into a spiral.
Optionally, we connect two, three spirals, more. It all depends on your taste.
Author Marina Zyablova
Christmas trees-beauties from beads.
Pendants-decorations for a fluffy beauty.
For work you will need:
Green beads (mixed 2 colors light and dark) as the main color of the Christmas tree;
- colored beads for the "garland" near the Christmas tree;
- wire (I have thin copper);
- a bead (at the top of the Christmas tree);
- (for the leg) little thing, see as in the diagram above:
We take 3 pieces of wire, approximately 25-30 cm each, put them together and twist them in the middle by cm 2.
We bend in the middle, form a loop and twist it about 1 cm down.
We put on a bead (of any beautiful shape) on this twist and straighten all 6 wires under the bead - the twist remains only under the bead.
We string beads onto our 6 wires - 2 wires with green beads, then 1 with colored beads, then again 2 with green and 1 with colored ones (everything is visible in the photo). Somewhere along cm 6, segments with beads turned out.
You can make any colored "garland" (for my version, see photo No. 11)
To prevent the beads from flying off the wire, we make a twist loop at the very ends (then it will be cut off).
We add our wires strung with beads (all of the same length - I have 6 cm each) in the same order - 2 green, 1 colored ... as in photo No. 8. And twist all the wires together (where there are no beads).
We bend the wires in the form of "pepper".
Holding the top with one hand, the bottom with the other, twist as in the diagram (photo No. 3) where the number is 7
Under the Christmas tree, just twist the wire
 |  |
 |  |
Author Yonya
Master class "Do-it-yourself decorative Christmas tree made of beads and sequins."
Author Ivashchenko Galina Alexandrovna, teacher of additional education, MBOU DOD PGO "Bazhovsky Center for Children's Creativity", Polevskoy, Sverdlovsk Region.
The master class is intended for teachers of additional education, technology teachers, lovers of needlework, adults and school-age children.
Live, fir-tree!
They bought me a tree!
They bought me a tree!
In the forest at the edge of the forest, they did not cut it.
And they made a Christmas tree at a good factory
Good uncles, funny aunts.
Come quickly
Take a look
On a Christmas tree made of thin silver threads:
All in shaggy needles,
Brilliant and lush
Per day -
And she will ring out barely audibly.
And the forest tree remained alive,
Standing on the edge
Nodding.
To whom?
Nobody!
Just - the wind, blizzards,
Just as beautiful
Uncut spruce!
I. Tokmakova
Target: Making a decorative Christmas tree from beads and sequins.
Tasks:
Educational:
- Introduce the loop technique of weaving from beads and sequins,
- Develop skills in working with beads and sequins,
- To instill interest in decorative and applied art.
Developing:
- Develop fine motor skills of the hands,
- Develop artistic taste, creative imagination.
Educational:
- To cultivate accuracy in the performance of work,
- Cultivate patience, perseverance,
- Learn to enjoy the creative process.
Purpose: Interior decoration, New Year's souvenir, handmade gift.
1. For work you will need: beads (the color of your choice is green, white, silver, gold), sequins (I have them in the form of flowers, but you can also have a different shape), needlework wire, cardboard, Master glue, scissors, containers for beads and sequins.
2. On a wire about 70 centimeters long, we put 8 beads and sequins in turn. Please note that if the sequins are not flat, then they should be worn in the same way: either from the convex or from the concave side.
3. We fix the dialed row. To do this, we pass the wire in the opposite direction, excluding the last bead.
4. It turned out the top of the Christmas tree.
5. Next, we collect a row of 3 beads, 6 sequins, alternating them with beads, 2 beads.
6. we fix the row, passing the end of the wire into the first bead. We tighten the loop.
7. We make 4 such loops, from which we get the first tier of Christmas tree branches.
8. For the loop of the second tier, we collect 5 beads, 7 sequins, alternating them with beads, 4 beads.
9 We fix the row by passing into the first bead with the end of the wire. We make 4 loops, the second tier of the Christmas tree is ready.
10. For the third and subsequent tiers, we collect 8 beads, 8 sequins, alternating them with beads, 7 beads, fasten them with a loop.
11. We make at least 20 such loops, the size of the Christmas tree depends on the number of loops (I have 45). Carefully straighten the loops.
12. We twist the cone from cardboard, glue it, cut off the bumps so that the cone stands.
13. Lubricate the top of the cone with Master glue, glue the crown of beads and sequins to it, let it dry.
14. Lubricating the cone with glue, gradually wrap it with a ribbon of beaded-sequin loops, let the glue dry.
15. Cut off the excess part of the cone, if any, leaving a strip of about 1 cm, cut it with a fringe, bend it inside the cone, glue it with a circle of cardboard that is suitable in size.
20. The Christmas tree is ready.
Joyful creativity to you and a happy New Year!
