A white lily flower every time attracts the attention and views of others to its beauty. Undoubtedly, she bears the invisible status of the queen of flowers. This article will continue the topic of Japanese kanzashi technique, using the example of making a chic white lily. You will learn an easy way how to make it from satin ribbon.

Before you start this amazingly beautiful master class with step by step photos and description, you will need to prepare all the required materials, as well as accessories. And most importantly, be patient and good mood, because the kanzashi technique also requires some attention. So here is the list you need:

Here detailed instructions on making a flower, which will be clear even to beginners. The first step is to make patterns for the petals. To do this, take the cardboard and cut out the template eight centimeters long and six centimeters wide. Eighteen petals will be involved in one bud at once. Five of them should be made with the tips deeply cut.

The petals must be singed alternately over the fire of a candle or lighter. As soon as you have burned one element, immediately begin to stretch its tips in different directions with your hands so that they turn out to be wavy, as shown in the photo.

It remains to give the blanks texture. To do this, put them on a towel. Then heat the knife over the fire and run the blunt side over the petals, pressing them a little. You should get longitudinal stripes that resemble veins. Petals, in which matter was additionally cut out in the amount of five pieces, should be tinted in emerald color. Food coloring, or rather a few grains of it, will help you with this. With your own hands, rub these grains into the satin, making it as homogeneous as possible.

Now it's the turn of the stamens. Cut the line into small lengths of five centimeters. Dip their edges first in glue, and then in dry semolina. When the blanks are dry, you will need to dip the stamens again in glue, and then in decorative golden sparkles.

We start assembling the kanzashi lily. Fasten the first tier to the felt in the form of a circle, in which there will be six petals. After the design dries a little, proceed to gluing the next tier, which will also have six petals.

Elements that have been tinted in green color, fold in the center. The first row will consist of three pieces, and the second of two. After that, drop a little hot glue into the middle of the bud and immediately attach the stamens. You need to hold the stamens with your fingers until the glue is completely dry.

A chic kanzashi-style flower is ready. Now it can be mounted on any surface. It can be a hairpin, an elastic band or a headband. Also, this craft can perfectly replace the brooch. You can make a bud not only white. For example, a kanzashi lily will look great in both pink and yellow. She will become the central figure of any panel or picture. The main thing is that it will definitely be noticed and appreciated.

So let's get started.

We cut off rectangles 7 cm long from the ribbon. For one flower, we need to make 30 petals.

Fold the rectangle in half along the long side.

Cut out the petal. This is how the petal should turn out. We do this with all 30 rectangles.

We take a lighter and singe the edges, but we don’t singe all at once, since we need to make waves on the petals. We singe about 1.5 cm, and stretch the tape in different directions with our fingers.

Next, we fold the petal in half again, fix the edge of the fold with tweezers, take the lighter again and run fire along the edge, do it quickly so that the tape does not melt, so our leaflet has a vein in the center. (The vein can be made both along the entire length, and not to the end, I have veins to the middle of the petal).

Bend the lower edges to the center, fix with tweezers, burn with a lighter and clamp with tweezers. Here are the petals.

When we have done this with all 30 petals, we begin to collect the flower.

We cut out a circle with a diameter of about 4 cm from a square of ribbon, singe the edges, and glue the petals.

Here in that order. This order is convenient for me personally. I think you will like it too.

First row 9 petals.

The second row is glued in a checkerboard pattern, also 9 petals.

The third row of 6 petals, we try to glue in a checkerboard pattern so that it is visually beautiful and there is no imposition of a petal of one row on a petal of another row.

The fourth row glue 3 petals in a checkerboard pattern, only skipping one gap.

And the fifth row is also 3 petals, also in a checkerboard pattern, just for the gaps that we previously missed.

Let's start creating stamens. We cut from a dense fishing line 6 identical segments of 5 cm.

We apply glue from a hot gun to the tip of each and quickly, until the glue has cooled and hardened, we dip it into a jar of sparkles, and twist it with our fingers, giving it an oblong shape, and these stamens should turn out. I think the pictures will make it clear.

The lily flower attracts the eye with its extraordinary beauty, aroma and tenderness. Craftswomen use the kanzashi technique to make it. The simplicity of the structure of the bud makes it easy to recreate a satin copy of this flower. The lesson will describe in detail the manufacture of a white lily from a satin ribbon using the kanzashi technique.

The Japanese kanzashi technique has long been a part of applied art. Silk served as the main material for crafts, but over time, needlewomen replaced it with satin and rep fabric strips. They are great for practicing kanzashi technique. For needlework, you will need to prepare materials and tools:

• silk or satin ribbon six centimeters wide;
• glue of a thick consistency;
• glue gun;
• candle;
• semolina;
• food coloring dark green, cotton wool;
• gloss with a golden tint;
• thin wire or fishing line;
• a piece of felt fabric, a towel and a knife.

Cut out the template for the lily petals. Take thick cardboard and draw a pattern on it. Plastic is also suitable for these purposes, and it will last longer. The length of the template is seven, and the width is five centimeters. One flower bud consists of seventeen petals. Five elements from this set must have a deeper cut than the others.

Cut the petals according to the template you made, and singe them one by one over the candle fire. At this time, try to pull the satin in different directions so that it acquires a wavy shape.

Then give the blanks more expressiveness. Lay out the elements on a towel, heat a knife over the fire, and run the sharp end along the petals, pressing them down until longitudinal stripes - veins are formed. Five petals, which should be deep cut, paint with green food coloring. Take a handful of grains, and start rubbing them into matter. It is easier to do this with a cotton pad. If such a dye is not available, take a dark green pencil and chop up some lead. The effect will be almost the same.

To make the stamens, cut the fishing line into 6 cm pieces, dip the edges in glue, and then in semolina. Repeat the procedure so that the semolina sticks better. Dry the stamen blanks, then cut the fishing line shorter.

The first row of the lily consists of six kanzashi elements. Glue them one by one to the felt piece. Dry the workpiece, and then glue the second tier of six petals.

In the third row, glue three elements painted green. In the fourth row, add two more pieces. When the craft is dry, drip glue in the center and insert the stamens. Hold them down so they stick well.

Kanzashi lilies are often decorated with hairpins, headbands or hair ties. It is possible to arrange several similar lilies in a beautiful bouquet.

Lily looks not only in white. Home interiors, decorative panels and gift wrappings are decorated with similar flowers. Show your imagination, and you will succeed. Watch the video of composing a lily flower using the kanzashi technique.

Video: DIY lily making MK

Lily using the kanzashi technique attracts many needlewomen with its beauty and ease of manufacture. You don't need to fold or sew anything. It is enough to have a ribbon and a lighter on hand. To speed up the process, make a cardboard petal template and use the kanzashi master class.

The Lily master class will require the following materials:

Video tutorials on creating a kanzashi flower

Video tutorial number 1 on creating a kanzashi lily on the headband

Video tutorial number 2 on creating a small kanzashi lily

Video tutorial number 3 on creating a large kanzashi lily

The procedure for making petals

Attach the shape to a wide white ribbon and circle it. Cut out 17 petals, 5 of which cut off the sharp edge on one side. These petals will form the center of the flower. Run a lighter flame along the edge of each petal, and while the cut is still hot, stretch the ribbon.

Following the instructions of the master class, you will get wavy petals.

When all the sheets are ready, proceed to the "painting" of the flower. This MK involves the use of classic embossed petals. Fold a towel in several layers and place the petals on it. It is necessary that when pressed, the upper part of the towel deepens greatly.

Heat the knife over the fire and run the blunt side over the leaf. You will get a groove that looks like a vein. Paint the rest of the petals in the same way.

flower assembly

Cut out a circle from felt or thick dublerin and glue 6 petals to it. When the workpiece dries a little, glue 6 more petals. Try to place them in a checkerboard pattern between the petals of the first row. Before gluing the 3rd row, it is necessary to tint the petals.

To do this, take food coloring and soak a cotton ball with it. Run a cotton swab across the bottom of the petal. If there is no dye, use a blade to make powder from the core of a green pencil.

Take a small amount of powder on a cotton swab and rub it on the bottom of the petal. After that, you can glue the last row of lilies. If you find it difficult to make lilies according to the instructions, watch the video.

To make stamens, you will need fishing line or nylon thread.

Spread the edges of the threads with glue and dip in semolina. After the stamens have dried, dip them again in glue, and then dip them in golden sparkles. Glue the stamens to the flower.

Such a lily can be fixed on a clip and used as a hairpin. If you decorate a lily with rhinestones, then you can fasten it to a jacket or a strict dress.

The fine art of kanzashi is a traditionally feminine craft that creates original hair ornaments. They are made not only from fresh flowers, but also from artificial ones. In Japan, the kanzashi technique is combined in work with origami techniques. The most popular flowers are orchids, roses, cherry blossoms and, of course, lilies. We invite you to repeat all the steps of the master class on creating a white lily using the kanzashi technique.

This delicate color can also be created from other materials, for example, weave white or beaded.

Before starting the master class, prepare everything necessary materials who will be involved in the work:

• satin ribbon 5 cm wide;
• PVA glue and glue gun;
• lighter;
• semolina and emerald food coloring;
• sequins, fishing line, piece of felt and scissors.

The first stage of the master class begins with the manufacture of a sample for lily petals. To do this, you need thick cardboard or a thin plastic sheet. The sample should be seven centimeters long and five centimeters wide. To make one kanzashi lily flower, you need to cut seventeen petals. In five blanks, one edge needs to be cut a little deeper than the rest. Scorch each element with fire. During this procedure, it is necessary to stretch each petal to give it a wavy look, as shown in the photo.

In order for the kanzashi petals to have the necessary texture, you need to perform the following steps. Fold a simple towel in several layers and place all the petals on it. The knife should be heated over the fire and the blunt side should be drawn over the workpieces, pressing the tool a little until characteristic vein stripes form. The petals, which were made deep cuts in the amount of five pieces, are tinted in green. To do this, use food coloring, which is gently rubbed with a cotton pad. If you don't have food coloring at the moment, you can grate the green crayon and rub it into the satin petals as well.

The next stage of work in the kanzashi technique is the creation of stamens for the lily. Cut a thin fishing line into small cuts, the length of which will be five centimeters. Dip each end of the segment first into the glue, and then into the semolina. Such manipulations can be done several times until you get a full-fledged stamen. The final stage of work on the stamen is covering it with gold sparkles. Such blanks should dry out, and after that it is necessary to cut a few pieces shorter.

Glue the first tier of petals onto the felt and leave the future lily to dry for a while. Then a second tier of six pieces is attached.

The colored petals of the lily will be placed in the center. Make the third tier of three pieces, and the fourth of two petals. After the kanzashi lily dries, it is necessary to drop glue into its central part and attach the stamens made with your own hands. Hold them for a while until the glue hardens.

As a result, you will get such a wonderful snow-white lily in the style of kanzashi, which is worthy to decorate any hairstyle or headband with a hairpin. You can make a few more buds and make a chic flower arrangement of lilies.

Lily is not only white. If you connect your imagination, you can create a whole range of satin ribbons different color buds. Their shape, splendor and structure will depend only on you. Kanzashi lily can become not only an accessory, but also an element of a flower panel, as well as an indispensable part of your interior. There are a lot of possibilities where lily should be applied. Most importantly, such work will not go unnoticed by your loved ones, who will appreciate your skills in the kanzashi technique.