Karaoke lovers and people who connect their lives with the creation of music often wonder how to remove vocals from songs. The cost of professionally executed "cons" is very high. What to do if there is not enough money, but you really want to buy a song without vocals? A program for creating a backing track will help you get a "voiceless" track. The user only needs to be patient and apply imagination.

FL Studio

The application is suitable for those who need a utility for high-quality processing of tracks with a large number of options. FL Studio is a program for creating a backing track from plus. The application is quite difficult to master. The developers have tried to make the interface as accessible as possible. The utility allows you to create and process music on your PC.

The program has a large number of different effects. The user has the option of internal mixing. The application has support for DirectSound and ASIO drivers. If the user wishes, the sound of a synthesizer, piano and other instruments is added to the track. During operation, the program for creating a backing track can cut high frequencies.

To make the interface clearer, along with the utility, you should download the crack, which is freely available. The cost of the license is $99. In the trial version of the program, you will not be able to save the result. The application is suitable not only for professionals, but also for novice music creators.

Cubase

This the best program to create backing tracks (in Russian). The Cubase application is one of the main competitors of the FL Studio utility. The program has many high-quality project templates. The user can work with the built-in mixer and a set of filters and effects. latest version The utility was released in Russian.

The authors of the project offer many tools for working with notes. If necessary, you can load several tracks into the program at once. Thanks to VST extensions, a professional studio has almost unlimited functionality. A program for creating backing tracks from songs is often used to change the sound of tracks in real time. Among the shortcomings, it should be noted the exactingness of the PC hardware and the high cost of the license.

Audacity

This utility is the most popular program for creating backing tracks (in Russian). Using the application, the user can record sounds from any source, digitize analog recordings, apply special effects, turn on the timer, and edit tracks and metadata. The program allows you to load several audio tracks at once. Songs can be mixed into one audio file. The user has the option of aligning tracks according to various parameters.

The most commonly used functions are creating a backing track by removing vocals from a recording, eliminating noise and silence, adjusting the volume level and turning on the equalizer. Among the shortcomings, it is worth noting the inconvenient interface. To export the file to the desired format, you will have to download the LAME codec.

Sony Acid Pro

The program for creating a backing track provides the user with the opportunity to get professional quality music. There is no limit on the number of songs you can download in the app. The compositions are based on looped fragments and MIDI tracks. With the help of VSTi software synthesizers, you can create an audio track with a surround sound effect and add sound to your video. The application is stable in operation.

Songs created with Sony's utility can be exported to various file formats. The installer size is 145.2 MB. The program for creating a backing track is distributed free of charge. Utility interface in Russian.

Adobe Audition

With this program, music creators remove noise and vinyl "clicks". A professional digital studio can also be used to create a backing track. In order to get the desired result, you need to cut songs without vocals and “glue” them into a single whole. You can create a separate track for each instrument, and then mix the melodies. To make a backing track in the application, you need to run the program and cut the first part of the song with a voice.

Then you need to find a fragment that best matches the track with vocals and delete it. Then you need to compare the resulting segments so that silence does not fall into the backing track. Next, you should mix the fragments into one file. To remove the "traces" of vocals, you need to hold down the Alt + Z keys and determine the main frequencies of the voice. The exact value is selected in the Notch filter.

It is opened by pressing the Ctrl key. Then you need to copy the music to the end and mix it. The second verse is edited in the same way. It is unlikely that it will be possible to make a full-fledged "minus", but it is worth a try. The result should be saved in any supported format.

GoldWave

Users who are interested in a program for creating music (backing track) often come across this paid application. The utility differs from analogues in a large number of musical effects. The user can experiment with trial version utilities. To do this, you need to open the main window and transfer the sound file there. Then you need to select the "effects" section in the menu and check the "stereo" item.

On the last tab, the user will have to work with the “reduce vocals” effect. Here you can also remove the voice or frequency. The desired result will not appear immediately. The user can turn on the Stereo Center effect. Then you need to select the line "delete vocals".

The FFT setting allows you to achieve the most acceptable ratio between distortion and echo sound. With the overlay option, you can do smooth transition between fragments. Next, turn on pre-listening and save the resulting file. To make a backing track using the "channel mixer" function, you need to select the "cut vocals" line in the submenu. It is worth noting that different effects may be suitable for each individual track.

AIMP3 player

This is familiar to many users. free app. Utility interface in Russian. The player is designed for listening and recording music. Not everyone knows that the program allows you to create backing tracks. To perform this task, you need to run the utility and select the desired track.

Then you need to go to the "sound effects" section in the settings. Then you should switch to the “Voice Manager” tab and select the “Vocal Removal Filter” line. The player will create a backing track from any added track. Among the shortcomings of the utility, it is worth noting the inability to save the result. A user who wants to disable this feature must uncheck the corresponding item in the settings.

From the minus song, you can use the Audacity music editor. If you do not have this program, then download and install it on your computer. Launch the editor and click the "File" tab, in the window that appears, select the desired audio recording and click "Open".

Once opened, the music editor will convert the audio recording into a spectrum of peaks. Then, in the track management menu, click the "Split" command, so the track will be divided into two channels - right and left. To ensure that the sound in both tracks is the same, select Mono for each channel in turn.

When the audio recording is divided into two channels (upper music, lower voice), select the lower channel, click on the "Effects" - "Invert" tab. In the main menu of the program, click the "Play" button and listen to the resulting minus. If the result satisfies you, then select the track and through the "File" menu, selecting the desired format, save the backing track on your computer.

You can also convert a song into a backing track using the SoundForge program. Download the program, install it on your computer and run it. Transfer the audio recording to the editor, in the control menu, click on the tab "Processing" - "Equalizer" - "Graphic". In the equalizer window that opens, you need to select the 20 Band display mode, since this mode has the maximum number (20) of sound change levers.

Now you need to remove from the audio recording the voice that falls in the middle of the equalizer (lever 7 - 16). Lever 11, located in the middle of the equalizer, must be lowered to the very bottom, and levers 10 to 7 should be aligned in ascending order to lever 6, the same should be done with levers 12 to 16, smoothly lining them up to lever 17.

When the equalizer levers are set in the correct order, press the Preview button, this will cut out the frequencies of the voice and automatically listen to the resulting composition. If you are satisfied with the quality of the backing track, then click on the "File" control menu and save the track in the desired format on your computer.

note

Usually, backing tracks songs created in recording studios by professional sound engineers. But this service is quite expensive. To an aspiring musician who can't afford to pay to create backing tracks you can create it yourself on your home computer.

You will need

• Computer, Adobe Audition

Instruction

First, let's decide how we will create it. You can pick up the parts of each instrument by ear using the MIDI editor. However, later on the MIDI track will have to substitute the sound of the VST instrument (“revive”). You can also create a backing track from a positive phonogram by erasing the voice using special programs. Let's consider this method in more detail.

You can remove a voice from a soundtrack using Adobe Audition. Having launched the program, we open all the previously created copies in it one by one. Having opened all the windows, we proceed to editing the “original” track. To do this, double-click on the track name in the left part of the window. Then, in the “Edit View” section, we select the wave image of the track we need by double-clicking the left mouse button.

Next, on the “Effects” tab, go to the “Filters -> Center Channel Extractor” section, in which you can select the “Karaoke” preset.

In this window, you can use the “Center Channel Level” knob to change the volume of the center. And with the help of “Discrimination Settings”, adjust the cutting width. You can also select the desired preset.

Now, click on the “Preview” button to preview the recording. And if everything suits you, it remains only to click on the “OK” button.

Related videos

Sources:

• How to make a backing track, backing track?
• how to make a backing track

Mp3 is the most common format playback. Files with this extension can be played on a computer. music center, player and even on cell phone. In order to convert an audio file to mp3, you can use one of the simple methods.

Instruction

In case the music is on a plain CD, use Windows Media Player to convert it to wma format. Run the program and insert the CD into the drive. After that, the windows media player module will start, copying music on computer. If this does not happen, start the module manually and copy the tracks to your computer. Wait for copying to finish, then proceed to the next step.

In order to complete the conversion, use a program for multiple track processing. The easiest to use is WMA to MP3 Converter. Download it at http://www.wma-mp3.org/. Install it on your computer and then add the tracks you got from the CD in .wma format. This converter supports batch processing of files, so you can immediately add all the files that you have copied from the disk. Upon completion of the conversion, listen to the resulting tracks. If the quality does not suit you, go to the third step.

Download and install Adobe Audition or Sony Sound Forge. These are professional audio editors that have high quality processing and user-friendly interface. Unfortunately, they don't support converting multiple files at once, so you'll have to process the files one at a time. Launch the audio editor, then open the track you need through the "File" menu. Listen to it and make sure its volume suits you. If this is not the case, use the "Normalization" tool. Normalize the track to 110% and listen. If the track goes without noise and cod, save it. Treat all files copied from the CD in this way.

Related videos

Helpful advice

Audio editors convert files much better than batch processing programs, so use it only if you are pressed for time.

Sources:

• how to convert music format in 2017

To convert the stove into a fireplace, it is necessary to make a number of reconstructions: demolish the furnace firebox, lay out the fireplace. This is a very time-consuming process and one cannot do without certain skills. Therefore, before proceeding with the disassembly of the stove, think carefully about all the details of the future fireplace.

You will need

• - simple brick;
• - refractory brick;
• - cement;
• - sand;
• - boards for the shelf;
• - facing material.

Instruction

The easiest way to convert a stove into a fireplace is to simply install a Finnish glass door instead of a cast iron stove door. At the same time, all the heating properties of the stove will be preserved, but the functions of the fireplace will additionally appear. This option is the most economical, both financially and in terms of labor intensity. After reinstalling the door, decorate the stove beautifully in folklore style. And on cold winter evenings, you can spend time contemplating the flames of fire through the glass door.

First, disassemble the old furnace to the ground. You can use old bricks to build a fireplace podium. It will burn fuel. Carry out construction on a cement-sand mortar. In the very body of the podium, lay niches for firewood. Overlap them with three rows of ordinary bricks or a row of ordinary bricks and refractory bricks placed on edge.

Arrange a portal on the podium, this is the place where the combustion process itself will take place. Determine the portal according to the overall dimensions of the room. In a small room, it should not take up too much space. Be sure to correctly calculate the size of the furnace window. If you make it much larger than provided, you will get constant drafts and hypothermia of the room. And such a fireplace usually smokes a lot.

Calculate the smoke hole of the fireplace. It should be 10-15 times smaller than the opening area of ​​the furnace part. You may need to narrow the chimney a little.

Perform the depth of the firebox of the fireplace in relation to the height of the portal as 1 to 2 - 2 to 3, because a smaller depth will cause smoke, and a larger one will reduce heat transfer.

Cover the portal opening of the fireplace with brick lintels. Arrange them on a special formwork (circle). Start your work by laying the heels. Support the circle with temporary supports. After the support feet on the wheel, install the central brick and continue laying simultaneously on both sides. Lay out the overlap of curved vaults and the smoke box no more than 6 cm.

Modern models snowmobiles quite expensive, so a great solution to save money would be a snowmobile converted from motorcycle. In addition, a snowmobile is a very bulky thing and takes up a lot of space in the garage. And this problem will also be solved by a motorcycle that will help out both in summer and winter.

You will need

• - motorbike;
• - ski for a snowmobile;
• - caterpillar tape;
• - lugs;
• - protective cover;
• - trunk;
• - Stretch marks and shock absorber rod.

Instruction

Remove the steering wheel motorcycle and replace it with an articulated snowmobile ski. In order for the ski to be movable and steerable, you must connect its front part to the steering “fork” motorcycle. The back of the ski must be attached to the frame.

The front wheel that you removed needs to be installed behind the rear wheel and connected to the frame with a shock absorber rod and braces. Thus, unnecessary details during the transformation motorcycle does not stay in the snowmobile.

Now you can put the track on the resulting wheel structure. The tape should run exactly along the rims of the wheels. Tape grouser can be made of aluminum and have dimensions of approximately 25 mm by 25 mm. The lugs allow the snowmobile to have good grip on snow and ice. Without them, on a slippery road and at high speed, it will be almost impossible to brake.

Related videos

note

Before operating a homemade transport, check it for reliability and safety. At first, it is not recommended to develop a high speed on a homemade snowmobile in order to avoid accidents. On frosty winter days, there is a high risk of moisture getting into the fuel supply system. Care must be taken to ensure that this does not happen.

Helpful advice

To make a snowmobile out of a motorcycle without any special skills, you can use the EXPLORER MOTO system. This design is good because it is installed directly on the motorcycle and does not involve dismantling it. And most importantly, the EXPLORER MOTO system provides a variable center of gravity of the snowmobile. If you move the track back, you will be able to overcome difficult obstacles created by deep snow.

The reversibility of electromagnetic phenomena allows the use of some types of electric motors as generators. This makes it possible to build on their basis power plants with foot, wind and other drives.

Instruction

Use the permanent magnet commutator motor on the stator as a generator without any modifications. When bringing its shaft into rotation with a frequency close to the nominal, it will generate a constant voltage, also close to the nominal. The polarity of this voltage depends on which direction the shaft is rotated. To filter the output voltage, that is, to remove bursts of self-induction and interference from sparking from it, use chokes and capacitors. Electrolytic capacitors can only be turned on with respect to polarity, and if they are present in the filter, the generator can only be untwisted in one direction corresponding to this polarity.

A universal collector electric motor, in which electromagnets are located on the stator instead of permanent magnets, first redo it a little: disconnect the stator winding leads so that they are no longer connected to the brushes. Apply a constant voltage to this winding - first from a battery that is charged from the same generator, and when voltage appears on the brushes, it will be possible to power the excitation winding from the generator itself. To prevent the battery from being discharged through the alternator when it is not spinning, use a reverse current relay (or diode), and to prevent overcharging the battery, use a regulator relay. Both relays must be rated for the same voltage as the generator, and their switching circuits are given in their passports or on their cases.

An asynchronous electric motor will not switch to generator mode when the shaft is untwisted, unless special measures are taken. Connect to it three non-polar capacitors in such a way that the resonant frequency of each oscillatory circuit, composed of a winding and a capacitor, is equal to the synchronous frequency. Connect the capacitors as follows: the first is between phases A and B, the second is between phases B and C, the third is between phases A and C. The generated AC voltage will also be three-phase.

Stepper motors differ from all of the above in that they need to be rotated at a low frequency. Connect two diodes to each of the outputs of such an engine: one with the cathode to the output and the anode to the minus of the filter capacitor, and the other with the anode to the output and the cathode to the plus of the filter capacitor. Thus, the total number of diodes will be twice the number of motor leads.

Currently, on various sites you can find backing tracks for almost all famous songs. Some of them were recorded in professional studios, and some were created by folk craftsmen who synthesized sound effects on home computers.

The largest and most famous sites from which you can download backing tracks are: http://a-minus.org/, http://x-minus.org, http://b-track.ru/ etc. They differ from each other only in the interface and the set of tracks available for download. There are no problems in how to download the backing track of a song to your computer, from one of these resources. You don't even need to register. Using the search system installed on the site, you need to find the necessary track and download it with one click. At the same time, the site can have several backing tracks of one song at once, differing in their quality. Therefore, you can choose the most suitable option.

If none of the sites listed above has the backing track you need, or it has an unsatisfactory sound, then do not despair. Continue your search on the Internet, most likely the record you need can be found on some resource. It may be that the song is new and the backing track is simply not available for it yet, then you just need to be patient and wait.

However, there is another option, you can try to create a backing track from an existing song yourself. This can be done using a special program, such as Adobe Audition, or on the site http://x-minus.org/remove-vocal-online. This service allows you to "suppress" the vocals in any track. The performer's voice will not be removed completely, but will become much less noticeable.

Related videos

A program for accounting for income and expenses of personal finance with the ability to generate reports. Planning the accumulation of money for various purposes. Control of loans and monthly payments. Everything for those who care to know: where does the money go? Great for family budgeting.

What can be printed on a 3D printer Ideas and examples of all kinds of products that every user of a 3D printer can make at home: dishes, shoes, plastic car parts, accessories for mobile phones, toys and much more.

• creating a backing track for creative musical or vocal performances;
• creating a phonogram for recording your own mp3 compositions;
• to create karaoke files;
• for DJs, creation of tempos, mixes and when designing other types of music tracks;
• I just like the music, but I don't like the song, etc.

Considering different purposes, different users with different levels of knowledge in music should be taken into account. Therefore, we need different programs with different levels of complexity and functionality. In order to cover all needs and enable each user to achieve their goal, this article offers some of the best programs for removing voice from songs. And some of the programs that are presented here can even separate vocals from music, but they are already for professionals.

Issues when deleting artist voices from songs.

Physically removing a voice from a song in an mp3 file is sometimes easy, sometimes very difficult. It all depends on how it is recorded: voices and music. For example, if we need to extract background music from a movie, this can be achieved even with the simplest program for removing voices from songs. In the film, the background music is recorded on a separate audio track. Getting it is not difficult. The voice of a song in mp3 files is most often recorded in a studio with simultaneous playback of music and is placed on one sound track. To remove singers' voices from songs in a common audio track, the task is already more complicated and requires fine user settings in functional software from this area. But fortunately, not every song recorded the vocals of the performers at the same time along with the music. There are many compositions of modern music, where a separate stream is allocated to the voice. In such compositions, the music together with the song lie in separate sound streams. For example, the accompanying MC voice most often lies apart from the music. Therefore, before you start removing vocals from a song, you should analyze whether vocals and music are separated in an mp3 file. If not, then you should work on it well with special programs. Many music sites and forums write that the software removal of a voice from a song does not allow you to get a 100% high quality backing track. And that's why you need to turn to professional musicians who will pick up a melody and create it from scratch on their instruments for a fee. But the latest program in this package eliminates such expense and complexity. In the last paragraph of the article, a surprise awaits you.

Effective programs for removing voice from a song.

ANTARES AUTO TUNE - for complex work with the performer's voice. This software product is the absolute leader in removing vocals or adjusting them in songs. The program constantly monitors the input channel, analyzes and allows you to edit so that you get an improved result at the output. The program is designed to correct a performer with a poor musical ear and make him a professional singer. It corrects defects in the voice and not getting into the notes of the performer. Adapting the program to remove the artist's voice from songs is not difficult. The entire analysis process takes place automatically. With incredible accuracy, the program determines the tone of the performer, which can be removed to zero, thus removing his voice from the song. The working range of the program is from A0 to C6. important distinctive feature in the program is a graphical mode of analysis and editing of vocals. The voice in the song is visible at a glance. The graph shows the pitch and moments of playback of the voice of the performers in the songs. Everything is very informative and convenient. If necessary, you can add sound special effects for vocals.

Simple software solutions help you remove voice or music quickly.

Here are the simpler and quick programs, which remove vocals from songs. At the same time, they do not require special knowledge from the user and give a 100% result. In those cases, the voice and music are recorded on different audio tracks:

1. Karino Audio Tools - a program designed to remove voice from a song and perform simpler tasks in the field of processing mp3 files: change the playback speed; ripping audio CD with subsequent conversion to Wav and Mp3 formats; adding sound effects. Karino Audio Tools does not change the structure of the mp3 file when removing a voice from a song and works very quickly.
2. Yogen Vocal Remover is a software tool designed exclusively to remove the artist's vocals from a musical composition. Analyzes multithreaded music files in WAV and MP3 formats. The program automatically determines on which track the vocal is recorded and deletes it.
3. Elevayta Extra Boy Pro. This set of programs includes a package of several utilities from Elevayta for sound processing. We are interested in the Extra Boy Pro module, it tries to remove the voice even from single-stream musical compositions. Very often achieves high results. The processing process is similar to mixing with an equalizer to suppress the performer's voice. The principle of operation of the utility is based on the selection of parts of the audio signal of a stereo track based on spectral and spatial characteristics. Extra Boy Pro is able to remove or change the level in these parts. Especially this utility will be useful for DJs.

Remove the voices of the vocalists from the song with a result of 100%.

WIDI Recognition System Professional is designed to convert music, voice and all sounds into notes and MIDI commands. The program recognizes music even where there are many simultaneously sounding voices. For example, a choir or an opera. What musicians do for hours when creating backing tracks, the program will do in a few minutes. But the user is required to edit and clean up unnecessary sounds to achieve a flawless result. For this, the program provides a convenient editor in which you can not only edit sounds, but also their duration or pauses. In this program, you can create a 100% backing track from any mp3 file without the help of musicians. The only drawback is that the music output is only 128 MIDI instruments or less. It all depends on which instruments you assign to which sounds. The program is ideal for creating karaoke, instrumental backing tracks or backing tracks for vocal and instrumental performances. Define a task, choose a program and develop creatively.

— Work more productively with sound

Audacity is a powerful free audio editor that, in our opinion, is able to satisfy almost all the requirements of the average user in the field of editing music content. A huge advantage of the program is its cross-platform, i.e. once you understand the logic of the application and learn how Audacity works, you will not need to spend time learning similar software when you change operating system. In this article, we propose to learn how to cut the artist's voice from any music track. But first, let's install the program on your computer.

1. Installing the program

The Audacity installation package is best taken from the official website of the program. On the main page of the project, click the link "Download Audacity... for Windows, Mac, or GNU/Linux" and select the distribution we need.

Note: On the download page of the program, we strongly advise you to download "LAME, MP3 encoder" as well. This will allow us to fully work with MP3 audio files in the future.

Hello reader. Every day you hear a lot of songs and there are moments when they are to your taste, but the words spoil everything. Therefore, in this article I will tell you how to get rid of the words so that only music plays. Let's figure it out.

I really like one song very much, and now I want to find a backing track for it, however, no matter how I searched and searched somewhere, I didn’t succeed. It seems that the song was famous, from whom I did not recognize everyone knows it, but no one had a backing track and many of my comrades also tried to find it. I had only one way out: to build everything myself, that is, to cut out the voice from the song I needed, using different software tools.

So now the description of the programs will go, those that we will need in the future.

Immediately it is desirable to warn that you will not be able to do everything cleanly, somewhere, but the voice of the singer will be heard.

Program to remove voice from a song

So, let's get to work. In the beginning we'll get along with the program "Audacity", with its help we will be able to make a backing track from the song you need.

• At first everything is elementary. We select it on the Internet, download and install it on a computer.
• We open software. Naturally, a window appears where we are invited to familiarize ourselves with the product. We close it.
• Click on "File" then select "open" and find the song you need.
• Now, where the name of the song you have chosen is written, on the right side there is a small black triangle - click on it.
• If you did everything as described above, you should have the same column as in the previous place, with the same triangle. Click on it again. Then you need to select "Mono", you need to do this in both cases!
• Then, select the "Effects" tab at the top. Click and set the function "Invert".
• If you can't wait, toil with the question: "What did I get?". You can listen. Just don't be discouraged if you don't get what you expected, because that's not all! Further more.
• Press the key combination "Ctrl + A". Then "Tracks" then "Merge to last track"
• We are almost done with you. Then click the "File" tab and find the "Export" function there. Next, select the save path, confirm that we plan to save and click "Ok".

Actually, this was the final step in converting the song into a backing track. By default, the file saving format is Wav, which, by the way, is not suitable for many because of the poor sound quality. When saving a file, you can choose any format convenient for you. It is also possible to convert a finished Wav file into another format using different programs, for example, Format Factory. The advantage of this program is that it is possible to cut music from a video file.

Further there is a video in order to better study the material. Everything is shown on it.

How to make a backing track with AIMP3

Now let's tell a little about another program in which it is possible to make a backing track in a couple of clicks. This is a familiar AIMP3 player. However, unfortunately, it has a serious disadvantage. It is possible to mute the voice in the song, but it will be impossible to save this file (in any case, I have not figured out how to do this yet). Yes, it has its advantages too. In particular, if you need to make a large number of backing tracks and there is no need to save them, then with the help of AIMP3 this can be done elementarily.

So, let's begin:

• Everything is elementary here, we find software on the Internet, download and install it.
• We find the song you need on the computer and create it in the playlist. This can be done in another way: click on "Menu", then "Open File".
• To the right of the Menu there is an image of a small wrench, everything is fine, this is "Settings". I click on it.

• The Functions Menu opens. On the left, in the list, look for "Sound Effects". Press, then select "Effects Manager" then "Voice Removal Filter" (and then we check the box)

It's simple, as already mentioned, with the help of AIMP3 you will make a minus in just a few clicks. Now those songs that you add to the playlist will become backing tracks themselves. This will be until you remove the bird near the "Voice Removal Filter". I note that there is no difference between that program and this one. The quality of the backing track is the same.

I want to note, no matter what software you use to create backing tracks, you will not succeed absolutely cleanly. Even with the help of Adobe Audition or SoundForge (and these are the best music editors at the moment), you will not get perfectly clean backing tracks, while the quality will undoubtedly be better.

That's all, I hope this article helped you.

If you find an error, please highlight a piece of text and click Ctrl+Enter.