Good snowy day, friends. Why snowy? Today your warm windless houses will be filled with bewitching snowflakes. Precipitation indoors is unlikely, I will just reveal the secrets of creating various "ice" crystals. The methods are suitable even for those who failed to pacify the scissors during school labor lessons. Follow the tips, then do-it-yourself angular sloppy paper snowflakes will become sophisticated ornate works of art.

For a graceful carved craft, you will need 3 simple ingredients: sheets, sharp scissors, plus fantasy. The rules here are observed only when preparing the base, and the pattern can be absolutely anything: Christmas trees, stars, monograms, hearts, rhombuses, intricate lines.

I tell you how to cut snowflakes out of paper with your own hands in stages:

To a beginner, the scheme will seem complicated, confusing. But the principle of work will definitely come during the process, you just have to take a sheet and make 1-2 correct blanks. short practice - The best way figure out how to cut snowflakes out of paper with your own hands in stages.

The folded "semi-finished product" must be filled with a pattern. It is drawn in advance with a pencil or improvised - each craft will turn out to be unique. The cuts at the base correspond to the edges of the finished product, at the top of the triangle - to the middle, on the sides - to the "body".

Keep in mind: the sheet has been folded several times, all the notches made will be mirrored, duplicated in each segment of the circle.

Simple schemes for beautiful paper snowflakes

Is fantasy letting you down? Creativity inspires distrust? Use existing cutting patterns to create crafts. Snowflakes are created along lines kindly built by other people. The drawings are printed as a whole or redrawn on a folded triangle and unnecessary segments are cut off.

There are a lot of options for schemes. The surface of the improvised "icicles" is filled with abstract patterns, flowers, figures of people, animals, cartoons, fairy-tale heroes. Here are the easiest guides.

"Herringbone"

From the top to the middle of the base, draw a straight line 0.2-0.5 cm wide, focus on the size of the sheet. On both sides, draw several equidistant segments to the "equator" at an angle of 30 °. The resulting series of strips must be cut through one. Leave the vertical line intact, otherwise the product will fall apart in two.

"Angels"

More difficult option, but the presence of the necessary scheme is the question "How to cut snowflakes out of paper with your own hands in stages?" removes instantly. Draw the outlines of 1-3 angels, if desired, complete the pattern with lines. Cut off unnecessary material. When you go around the contour of the figure, leave thin paper "bridges" - the character must stay on the body of the craft.

"Monogram"

Monogram "icicles" are amazing with a minimum of effort. The pattern is repeated throughout the product, it seems too intricate, difficult for a person to perform. Take the diagram, fill in the blank with any monograms you like or a lot of intertwined lines. It remains only to get rid of excess material and unfold the sheet.

See what other results you can achieve with. The process of creating products corresponds to simple principles - we translate the drawing, we use scissors. The result looks like a real frosty miracle.

Cut out beautiful paper snowflakes according to the schemes: 3 tips

My beautiful paper snowflakes did not start to turn out right away, at first I had to ruin several dozen sheets and sacrifice pride. Through countless trials and errors, a list of rules for creating crafts appeared. I use it when I plan to surprise others with the ability to control scissors, and I advise you to follow the points.

1. Choose the right material. For crafts that are attached to windows, walls, it is better to take thin sheets. You can stop at notebooks, tracing paper, napkins. Suitable for hanging products office paper, craft, drawing paper. The materials are thicker and hold their shape well. Only cutting them is more difficult, the tool will need a strong, sharp one.
2. Spend more time on the product. The drawing doesn't have to be complicated. The main thing here is a lot of matching lines, notches. The more, the more complex the pattern seems, even if you cut through a dozen of the same stripes, like the Herringbone.
3. Find scissors with a thin blade. The graceful tip of the tool will allow you to remove small dots, stripes - the craft will only benefit. Some consider nail scissors to be ideal, but they will not take thick paper. Look for tools to suit your needs.

Volumetric paper snowflakes

Volumetric crafts are less sophisticated than carved counterparts, but they look more attractive as a decoration of the space. Didn’t understand how to cut snowflakes out of paper with your own hands in stages? Try to master the options below.

"Fan"

The creation of the "Fan" can be entrusted to a child or a person far from creativity.

1. Take some sheets. The more of them, the denser the craft will turn out.
2. Position one vertically in front of you.
3. Draw the sheet with horizontal equidistant stripes - optimally after 1-3 cm.
4. Change the length of the indent - the final look of the product will be different from the previous ones.
5. Next, fold the base with an accordion: bend the first strip to the left, the second to the right, the third to the left again - and to the end.
6. Squeeze the accordion, fold it in half vertically. Glue the adjacent sides.
7. Create several parts, connect to each other. Unusually beautiful paper snowflakes will turn out - a kind of pleated skirt.

"Flower"

The voluminous craft is ready, it remains only to hang it up. Manipulations in the process of creating the "Flower" are simple and understandable, the result is incredibly beautiful.

Are you going to fill the interior with a winter fairy tale? Simple creativity is still worth mastering. For me, creating "crystals" is a great way to relax, get distracted. Successful snowflakes make the fantasy work harder, come up with more and more intricate patterns, and tools make it more skillful to bend around thin lines. Try to captivate with household chores, New Year's mood, you are provided with comfort.

See you soon, share your successes and subscribe to blog updates in anticipation of new creative ideas.

DIY New Year's cards

DIY Christmas decoration

DIY Christmas compositions

How to make paper snowflakes

There are many ways to make a paper snowflake. You will learn how to make a regular and volumetric snowflake. Call the kids and let's get started. You will definitely succeed.

How to make a snowflake with your own hands (scheme)

1. Prepare a square sheet of paper and fold it in half diagonally.

2. Fold the resulting triangle in half again.

3. Notice how the new triangle is being formed. This is done by eye. The main thing is that one side of the triangle is in contact with the opposite fold.

4. Cut off the lower part of the figure and you can draw a path along which you will cut further

Here are some pattern options.

How to make a snowflake (video)

Step 1: make blanks

Step 2: Draw the pattern and cut out the snowflake

How to make a volumetric snowflake

You will need:

Paper of any color (preferably not too thin);

Scissors;

Stapler (you can use glue or tape);

Simple pencil;

Ruler.

1. Prepare 6 paper squares. The squares must be the same size. Fold each square in half diagonally.

* If you want to make a small snowflake, then the side of each square can be 10 cm, and if large, then all 25 cm. For large snowflakes, it is better to use thick paper. For beginners, it is advisable to make the first snowflake small.

2. Using a ruler and pencil, mark 3 parallel lines. The distance between each line should be the same. When making a large snowflake, you can make more stripes.

* In the image, the lines are drawn with a red felt-tip pen to make it easier to see.

3. Start cutting the paper from the edge with scissors, not reaching a little to the middle (about 3-5mm).

4. Turn the paper back into a square, and begin to roll the first row of strips into a tube (see picture).

* Strips can be stapled or glued together.

5. Flip the paper over to the other side and staple the next two strips together, also securing them with a stapler, glue, or tape.

6. Turn the snowflake over again and connect the last strips.

7. The same process must be repeated with the remaining five paper squares.

8. When all parts of the snowflake are ready, they need to be connected with a stapler in the middle. First you need to connect the half of the snowflake, that is, its 3 parts, and then the remaining 3 parts.

9. Staple both halves together, as well as all the places where the snowflakes touch. So the snowflake will not lose its shape.

10. Start decorating the snowflake however you like. You can use stickers, glitter, etc.

* Your a beautiful craft You can hang it on a window, wall, or Christmas tree.

How to make a big paper snowflake

You will need:

Thick paper of any color;

Scissors;

1. Cut 12 strips of paper 1cm wide and 20cm long.

* You can slightly increase the size of the strips - width 1.5cm, length 30cm.

2. Cross the two strips in the middle and glue them together as shown in the picture.

3. Add 2 more strips vertically and horizontally, interlace them and secure with glue if necessary.

4. Glue the corner strips together as shown in the picture. We get just such a figure, which is half a snowflake. Using the same technology, prepare the other half of the snowflake.

5. Now it's time to glue the halves together. To do this, turn each 45 degrees. Glue the loose strips to the corresponding corners of the petals (see picture).

* You can glue the halves in the middle so that the snowflake looks like a flower.

How to make beautiful pasta snowflakes

You will need:

Pasta of various shapes;

Acrylic paints;

tassel;

Decorations to taste (sequins, stickers, artificial snow (you can use sugar or salt instead), etc.);

* For convenience, unfold pasta on a large flat plate.

* In order not to stain the table with glue and paint, cover it with paper.

1. Before you start making a snowflake, you need to come up with a shape, i.e. how it will look. At this stage, it is also worth considering which form will be strong and not stick out.

2. When you have come up with a shape, you can start gluing. In this case, Moment glue is used, but if you don’t have it, you can try replacing it with PVA glue.

2.1 Glue the inner circle of the snowflake first. After that, you need to leave the glue to dry and this small part of the snowflake will get stronger.

2.2 Start gluing the next circle.

* According to the same scheme, you can "build" several circles, but remember that the material is fragile, which means you should not get excited and make huge snowflakes.

2.3 After gluing, leave your snowflakes for a day.

3. Time to paint the snowflake. For this you can use acrylic paint. Maybe, the best option there will be paint in a spray can, but it is better to apply it outdoors and not indoors.

* Do not use gouache - it will not only take longer to dry, but may also crack if applied in a thick layer.

* If you are using acrylic paint, you should also choose a brush that can penetrate all the cracks in the pasta.

* It is advisable to have several brushes different sizes, for comfort. If necessary, a second coat of paint can be applied.

4. We decorate the snowflake. You can use glitter or artificial snow, for example.

* Snowflakes do not dry out quickly, so it is better not to rush to hang them on the Christmas tree immediately after production. You can hang such snowflakes both on the Christmas tree and on the wall.

How to make a snowflake from a toilet paper reel

One such reel is enough for just one snowflake.

Press the bobbin down and cut it into 8 equal parts (each will be about 1 cm high).

Simply glue the resulting rings together.

Now you can decorate your snowflake however you like.

How to make a very beautiful snowflake from buttons or rhinestones

In stores, you can buy ready-made dense snowflakes made of cardboard or felt.

But you can make such a snowflake yourself. Just draw your snowflake on cardboard and cut it out. You can draw each detail separately and then glue everything together.

You can decorate these snowflakes with rhinestones or buttons. different colors and shades. You can also use small figures by gluing them to the snowflake.

Everyone is happy about the new year, especially children. New Year holidays they are waiting impatiently, and the expectation can be brightened up - to occupy their hands with something interesting and useful, for example, to make decorations on the windows or on the curtains in the form beautiful snowflakes. But not always children's hands can cope with intricate patterns on snowflake patterns, such fingers need something simpler, and we have something. These are schemes simple snowflakes suitable for preschoolers, well, or first-graders. The most important thing is to meaningfully bend the workpiece, understanding where we will have the middle of the snowflake, and then it remains only to cut the edge in the right way.

To begin with, it is better for a child to practice on plain paper, it is more pliable. And when you learn, you can start making light and translucent snowflakes from paper napkins. It is not worth training on napkins, it is more difficult to bend the workpiece evenly, the edges move relative to each other and the child will not be satisfied with the craft, practice is important here.

Classic snowflake:

If you also cut off a sharp corner, you will get a hole in the center of the snowflake.

Ice Snowflake:

Also, as if from ice crystals, but with a hole in the center:

These are such simple and easy snowflakes to make. If it doesn't work out, try again and you will definitely succeed :)

How to teach children to cut paper snowflakes?

Paper folding patterns for snowflakes

Description

3. Fold the resulting square diagonally, bending the lower left corner up.

4. Cut off the left sharp corner in a semicircle

Paper folding patterns for cutting rhombuses

1. Fold a square sheet of paper vertically.

2. Fold the resulting rectangle horizontally.

3. Fold the resulting square diagonally, bending the upper right corner down.

4. The resulting triangle is the basis for cutting rhombuses and squares.

Lesson 1. Cutting an asterisk

1. Fold and cut a square sheet of paper as shown in the diagram. Cut out two large isosceles triangles along the arc to form the edge of the star.

2. Cut out small triangles on both sides, as shown in the diagram. They form patterns within the star.

3. Cut out two right triangles near the sharp corner to create a pattern in the center of the star. Expand the star and compare what you have with the image in the book.

Lesson 2. Cutting a snowflake

1. Fold and cut a square sheet of paper as shown in the diagram. Cut out several shapes in an arc to form the edge of the snowflake.

2. Make cutouts on both sides, as shown in the diagram.

3. Make the rest of the cutouts on the sides and around the sharp corner.

Lesson 3. Cutting a napkin

1. Fold a square sheet of paper according to the pattern for cutting diamonds. On the left side of the triangle, outline and cut out the overall shape of the flower.

2. Cut out the "petals". Make cutouts along the bottom side of the triangle.

3. Make small cuts along the long side of the triangle, leaving small gaps between them.

The second option for making paper snowflakes

DIY paper snowflakes

We cut out a circle from thin white typewriter paper and fold it in half, then in half again, we got a skirt for mom (1). From this blank Dunno wanted to sew a festive shirt for himself (show a real shirt with buttons). He put on one half of the shirt correctly: exactly to the middle (2). But since Dunno didn’t know how to dress on his own, he put on the other half topsy-turvy and back to front - we bend the workpiece in the opposite direction (3). When Dunno realized that the shirt did not work out for him, he decided to make shorts out of it. At the bottom in the middle of the workpiece, he cut out a small triangle (4). But he didn't get shorts either. Then he took scissors and rounded one leg on the workpiece (5), and cut out long “wolf teeth” from the second (6). And he liked it so much that he cut out semicircles and "wolf teeth" first on the left side of the workpiece (7), then on the right (8). At the same time, the “teeth” could grow side by side, one from the other, or directly from the roundings. And when there was very little paper left, Dunno unfolded the blank, which turned into a beautiful openwork snowflake with six large rays. Pay attention to the children that the top of the triangle cannot be cut off, as the snowflake will lose its shape.