Every woman wants her beloved man to look neat, and his shirts are always perfectly clean and ironed. Although many, especially young housewives, do not know how to iron a shirt with long sleeve Right. Although there is nothing complicated in this. With the knowledge of some secrets, this activity will not take much time and effort.
Basic Rules
There are several rules on how to properly iron a long sleeve shirt. Fulfilling these conditions, the ironing process will become a pleasant procedure for women.
Shirts should be ironed as follows:
In addition, each product has a label indicating the optimal ironing mode. Therefore, before ironing, you can clarify which mode is required.
Preparatory process
Before you start ironing, you need to prepare improvised tools that you may need. Namely, an iron, and a spray gun. It is desirable that the board has a special device for ironing sleeves. It is she who allows you to iron the sleeves of a shirt without arrows. But you can replace this device with other improvised means, for example, a rolled towel.
If the iron does not have a steam function, then you will need a spray bottle with water. And also two towels, but a must light color so as not to stain the white shirt. One must be spread on the surface of the ironing board. Through the second, it will be possible to iron the shirt so that stains do not form on it and it cannot lose color.
Correct ironing mode
Each material requires its own temperature and humidity. And if the composition of the fabric from which the shirt is sewn is not known, then it is best to start ironing from the minimum setting.
The correspondence of materials to the ironing regime is as follows:
- cotton products (100%) - 150 degrees, the material can be steamed;
- crinkled cotton - 110 degrees, but it is impossible to steam;
- linen shirts - 210-230 degrees, strong steam;
- - 120 degrees, no steam.
Silk products are generally ironed very well, but it is better to do this without steam, as the shirt may become shiny. It is necessary to iron such a product only from the wrong side on the lowest setting.
The process of ironing a men's shirt must begin with small parts. First of all, you need to steam the collar and cuffs from the wrong side. The iron is advanced from the edge to the center so that wrinkles do not form. After that, you need to turn the product over and repeat all the manipulations. You can not iron the collar along the fold, this will give it an irregular shape and spoil appearance men's shirts.
After the collar, the cuffs are ironed. The ironing technique is the same as in the case of the collar. First, the sleeves must be unbuttoned and straightened. If the product has double cuffs, then they are first ironed in the expanded state, and then ironed along the fold.
Next, the most difficult part of the men's shirt is ironed - the sleeves. It is necessary to do this so that arrows do not form on them, they must be perfectly smooth and even. For this, the sleeves are straightened on an ironing board and folded in half. It is necessary to focus strictly on the seam of the product.
Ironing is done from the shoulder line towards the cuff. But do not iron very close to the edge, it is from this that unnecessary arrows appear. After one side is ironed, the product is lifted and unfolded so that the seam is at the bottom, and is located exactly in the middle. Then, the rest of the sleeve is ironed. The same manipulations are performed with the second sleeve.
The easiest way to iron the sleeves is on a special device that is included with modern ironing boards. You can also use a rolled towel for this. This will not only help to avoid arrows, but also significantly speed up the ironing process.
Then they begin to iron the shelves, while they begin to smooth the side on which the buttons are located. First, the area around them is smoothed, while it is impossible to iron over the buttons, since after such ironing ugly marks form on the shirt. After that, the rest is ironed, it is necessary to move strictly from top to bottom. But the pocket, on the contrary, is ironed from the bottom up, such actions help to avoid the appearance of wrinkles. Do the same with the second shelf.
The back is ironed last, this is the lightest part of the shirt. To do this, it is necessary to lay out and straighten the product on the ironing board so that wrinkles do not appear after ironing. In this case, you need to position the thing so that the sleeve is near the long edge of the board. All movements with the iron should be made from top to bottom. Start from the line of the shoulders and gradually move to the edge.
After ironing one half, it is necessary to turn over men's shirt. Moreover, this must be done so that the second sleeve is already at the edge of the ironing board. The ironing technique is repeated. At the very end, they iron the middle of the back, as a rule, a very thin strip remains there. After that, the shirt can be hung on a coat hanger or.
The men's shirt is ironed, but before putting it on, you need to hang it on a hanger and carefully look for any unironed areas on it. If there are none, then the work has been done perfectly.
It is very important to properly care for men's shirts so that they retain their original appearance for a long time. To do this, you need to know how to properly iron men's shirts, how to wash and fold them. First of all, you need to study all the information on the product tag indicated by the manufacturer and strictly adhere to it.
It is very nice when your man wears a perfectly clean shirt without a single wrinkle, which indicates what a caring woman you are and what kind of person you are. good hostess. To do everything right, you need to know a few secrets about caring for men's shirts, which we will reveal in this article.
Expert opinion
Helen Goldman
Male stylist-image maker
The collar and cuffs get the most dirty when wearing a shirt, due to close contact with the skin of the hands, but it is not recommended to rub them with brushes or hands so as not to deform the cuffs and not provoke tissue destruction. It is necessary to soak these places in special tool for washing shirts.
Handwash
Shirts must not be dipped into a basin of boiling water. If you do not follow this rule, then colored fabrics will quickly lose color saturation, and light fabrics may turn yellow. The baud temperature should not exceed 40 degrees.
After washing, the shirt should not be twisted to avoid excessive wrinkles that will be difficult to iron. Also, do not use bleaching agents when soaking, which destroy the threads of the fabric.
Important! If the fabric from which the men's shirt is sewn fades, then only hand washing is suitable for it. Otherwise, you risk ruining other things that will be erased along with it.
In the washing machine
Modern washing machines have gentle modes that minimize signs of wear on the shirt fabric during regular washing. There is no need to pack the shirts in a pillowcase or turn them inside out. Such methods have long been discouraged. The only disadvantage of machine washing for a long time is that the color of the fabric of the product may change. But this problem can be easily solved with the help of a quality powder suitable for the type and color of the shirt fabric.
Advice! Shirts should be sorted by color before washing. Light models are washed separately from color ones. To avoid deformation of the collar and cuffs, it is recommended to fasten the buttons before washing.
Remember all the rules on how to wash men's shirts in washing machine not difficult. It is important to additionally process the most contaminated places before washing, fasten all buttons and do not clog the drum of the machine to failure. After washing, shirts must be immediately hung on a coat hanger to dry in order to prevent the formation of a large number of wrinkles, which will greatly simplify the ironing process.
Selecting the ironing mode depending on the type of fabric
Before answering the question of which shirts are well ironed, it is necessary to figure out at what temperature it is better to iron certain fabrics. If you choose the wrong temperature for ironing, then the risk of spoiling the thing increases for another initial stage process. Each tissue responds to a certain temperature, which must be known in advance.
So , it is necessary to iron a men's shirt carefully, and for this it is worth looking at the composition of the fabric. If it is mixed and consists of 50 to 50 cotton and polyester, then the heating temperature of the iron should not exceed 110 degrees. Chiffon and silk models should be ironed at a temperature of 80 to 110 degrees.
Natural cotton shirts will not be ironed at a temperature of less than 150 degrees, and for linen fabrics it will be necessary to turn the temperature up to 220, while additional wetting of the fabric during the ironing process is welcome.
Wool must be ironed strictly through the fabric in the same temperature regime like mixed fabrics. In this case, it is recommended to use the steam mode. It is better for young housewives to start with cotton things to hone their ironing skills. Natural fabrics are easier to iron.
How to iron properly?
Experienced housewives start the process from the back of the shirt, but girls who are just mastering the technique are advised to start and small parts. The ironing system runs in the following sequence. We start with the collar, then move on to the cuffs, sleeves, back and shelf of the product.
For reference! It is necessary to start ironing the shirt, at the moment when the fabric is not yet dry, it should be slightly damp, then the process will be easy and fast. If the fabric is dry, then before laying it on the ironing board, it is recommended to wrap the product in a damp towel for several minutes.
How to iron the collar of a men's shirt? We begin to iron it from the wrong side and only then move on to the front. If the shirt is not made from natural fabric then in the process of ironing, stains may remain on it, therefore, before taking on the iron, the collar must be sprayed with a spray bottle. All movements should be slow with little pressure.
After that, we rise gently up the sleeve. This is the most difficult place where creases and folds are most often formed. The sleeve folds in half at the seam. We begin to iron from the seam to the middle of the sleeve. Next, you need to decide if you need an arrow on the sleeve?
IN classic models the arrow is ironed more often, for this, the fabric of the sleeve is simply gently straightened and ironed well over the entire surface from top to bottom. If the arrow is not supposed, then reaching the edge, the fabric gradually shifts. And it is best to use a special mini board for high-quality ironing of the shoulder area. After the work is completed on one side, it is necessary to turn the sleeve over and repeat all the manipulations.
The shirt shelves are straightened in the direction from the buttons. The iron moves from top to bottom. Separate attention is paid to the pocket, it is leveled in the opposite direction from the bottom up. Make sure that the hot surface of the iron does not come into contact with the buttons.
Do you iron shirts yourself?
YesNo
The back is the largest part of the shirt, so it will not work completely on the ironing board. She is ironed in two, or even three steps. The yoke and shoulder area are carefully smoothed with the nose of the iron, and then the iron moves down.
Special attention we give the joints of the seams so that there are no folds on them. Moving along the surface, it is necessary to ensure that creases and folds do not form. The yoke on the back is pre-treated with steam and smoothed down.
What are the nuances?
After the ironing process is completed, the shirt is hung on a coat hanger, while it is not recommended to hide it in the closet until the fabric cools down. In order for the collar not to lose its shape, it is better to fasten the top button immediately. Most housewives prefer to store shirts on hangers, but some fold them and store them on shelves in the wardrobe.
How to fold men's shirts?
To store shirts on the shelf and not be afraid that they will wrinkle, you need to know how to fold men's shirts correctly. To do this, take an ironed shirt, fasten all the buttons on it and place it on a flat surface with the back up. Next, we will consider the folding process step by step.
- We start from the left side. Carefully take your fingers in the middle of the shoulder. Then draw an invisible straight line down and grab a little fabric from below with the second finger. Ideally, about a third of the width of the back should be separated, which is folded up along with the sleeve.
- It turns out that the sleeve lay diagonally. So that the sleeve does not wrinkle during further folding, it is turned inside out, placing it parallel to the inverted sidewall.
- The same manipulations are carried out with the right side of the shirt. Both sleeves are neatly placed parallel to each other.
- Next, you need to take the bottom of the shirt and bend it up to the width of the palm. Fold the remaining length in half so that the fold line reaches the collar.
In this form, you can store shirts on the shelves for a long time and not be afraid that they will wrinkle.
Conclusion
Learning how to properly care for your man's shirts is not at all difficult. The main thing is to master the art of washing, ironing and learn how to fold a men's shirt in such a way that it takes up little space and does not wrinkle. Having understood the technical aspects of each procedure, any woman can save a lot of free time and at the same time be proud that her husband looks like a Hollywood star in a perfect shirt.
The ability to iron a shirt by yourself is a necessary skill for any man. Every time resorting to the help of a spouse, mother, sister and even mother-in-law is clearly not an option. Moreover, not all women (no offense) are able to do this correctly and as carefully as the person who will have to wear the thing. And if we are talking about your favorite men's shirt of a prestigious brand, of course, it is better to rely on your own strength. There is nothing difficult in this.
WHY A MAN CAN IRON A SHIRT
Achieve the most effective results. No one is more interested in the perfect shirt than the wearer.
Self-ironing will allow you to pay attention to the smallest details, the importance of which cannot be underestimated. Even slight creases on a shirt can spoil the impression of the best men's suit of a well-known brand.
The fair sex simply may not be around, for example, during a business trip. And every time to give a shirt to dry cleaning is not the best solution. Plus cost savings.
Reduced wear and extended service life. Ironing a men's shirt correctly is the ability to concentrate on problematic elements (collar, cuffs), and not put pressure on other areas once again.
Ironing a shirt takes very little time, and the skill remains for a lifetime.
WHERE TO START IRONING A SHIRT
In order to iron a shirt, a man must have the necessary equipment - ironing board And iron. It is advisable to use a good iron with a Teflon coating and a steam spray function. Place the ironing board in a convenient place to iron your shirt as comfortably as possible. Of course, the thing must be pre-washed and dried.
Before you start, check out the shirt care tips provided by the manufacturer. Usually such information is indicated on a special label on the inside of the shirt at the bottom left. Pay attention to the iron icon, which should not be crossed out. Perhaps this type of shirt cannot be ironed at all.
one point. The shirt is synthetic. Keep heat low (175 to 230 degrees).
Two dots. Silk or wool shirt. Keep heat at medium levels (250 to 300 degrees).
Three dots. Cotton shirt. Keep the heat high (320 to 400 degrees) and use steam.
Wait for the iron to heat up, turn the shirt inside out, turn on the music or TV and start ironing.
SHIRT IRONING - STEP-BY-STEP INSTRUCTIONS
Start ironing the back of the shirt, which tends to gather the most wrinkles while wearing it. To do this, completely undo the buttons and lay the shirt along the ironing board. First, take a good walk along the lower wide part and eliminate all the bumps. Then move on to the shoulders.
Pass one shoulder side through the narrow part of the board and, with moderate pressure, direct the iron to the bottom of the shirt, moving from top to bottom. At the same time, carefully hold the shirt and be careful. After all, it is necessary not only to get rid of old folds, but also to avoid the appearance of new ones. Use the ferry if necessary. Do the same procedure with the second shoulder and move on to the sleeves.
Ironing a long sleeved shirt is not easy. This is one of the most inconvenient elements. Start by laying one shirt sleeve on the board. With your hands, carefully align the edges of the sleeve at the seams and eliminate the unevenness of the material. Start at the lower armpit and slowly move towards the cuff.
In order to form an even arrow, carefully walk along the upper part of the sleeve (along the seam). If there is no such goal, then do not bring the iron to the very edge and, moreover, do not press hard. Steam well and iron the cuffs. After that, repeat the steps with the second sleeve and go to the collar.
If the design provides, remove the detachable collar and unfasten the buttons. Once flattened, place the collar on the ironing board with the back side up. Rinse well with water or steam and wait 30 seconds. Then work carefully with the iron in the direction from the center to the edges.
The collar material is usually thicker and stiffer than the rest of the shirt, so iron with a little more pressure. After that, fold the collar and lightly run the iron along the front along the seam to sharpen the corner.
The final step is ironing the front of the shirt. Pay special attention to the area near the collar, as this area is located near the neck and catches the eye.
Use the narrow side of the board. If you have a pocket, carefully guide the iron from the center to the edges (as with a collar) to avoid wrinkling. Slowly, so as not to damage, go through each section of the shirt between the buttons.
Ironing a slightly damp shirt will be more effective, especially cotton fabrics. If the item has had time to dry completely, use a water spray to eliminate wrinkles.
Take care not to iron on shirt items such as buttons, labels, metal fasteners or zippers (if any).
Keep your iron in good condition. The surface must be clean and free of mineral deposits.
Place the shirt on a hanger (at least the back of a chair) immediately after finishing the process.
Break various stereotypes about the division of domestic labor between a man and a woman. Learn how to iron a shirt yourself and add another useful skill to your basics. male style. Do not forget that you need to initially choose the right shirt and in the future to properly care for the thing.
Everyone needs to know how to iron a shirt properly. This item is in the wardrobe of almost any man and any woman, it helps to realize a strict and noble image. At the same time, the shirt looks impressive only on condition that it is well ironed.
In this article, we will present step by step instructions, which will help you achieve the perfect result when ironing and look great in a shirt.
Before you start ironing, you must read the instructions on the product label. An iron icon with one circle inside means that the fabric needs to be processed at a minimum temperature, two circles correspond to average values, three to maximum.
Remember that when ironing silk or synthetic items, it is recommended to refrain from using steam and use the most delicate mode. The best thing turn shirt inside out and only then proceed to processing. The same goes for any dark fabric, which may show shiny marks when ironed on the right side.
Buy clothes famous brands at low prices you can in the online store https://barbaru.ru/
Cotton clothing may be affected high temperatures and even steam. Linen fabric can be ironed at the highest setting and steam can also be used.
Experts do not recommend drying clothes with an iron - in this case, the fibers of the fabric experience a significant load and are damaged. Therefore, it is better to dry the shirt before ironing or leave it slightly damp. You can always dampen the fabric with a water sprayer or select the steam mode.
Of course, it is most convenient to use an iron on a special ironing board. Large boards often come with miniature ones, which are convenient to use in order to iron long sleeves without wrinkles.
To spend less time ironing, you need to make sure that the shirt does not wrinkle during drying. It is best to hang clothes on hangers after washing, so you don’t have to think about how to deal with creases.
Ironing sequence
The key to success when ironing a shirt is to follow the correct sequence of ironing the elements. You need to start with small details (collar, cuffs, shelves), and then move on to the sleeves, back and front parts. So there will be no creases on large parts.
Collar
Long sleeve shirts should be ironed starting at the collar. Do this from the wrong side, starting from the corners and gradually moving towards the middle. In no case should you smooth the crease on this element - the shirt will not look the best.
Do not leave the iron in one place for a long time - this may cause marks from the soles on the clothes. To prevent the fabric from stretching and deforming, all elements must be ironed in the direction of the shared thread.
Yoke
With further actions, the coquette may wrinkle a little, so additional processing may be necessary in conclusion.
Cuffs and sleeves
Before moving directly to the sleeves, smooth out the cuffs. You should unbutton all the buttons on them and start processing from the wrong side. Then turn it over to the front and also iron. Remember that the location of the buttons must be bent around with an iron.
Arrows on shirt sleeves are a sign of bad taste. How to iron this element correctly? The most obvious advice is to use a special mini ironing board. Gradually moving the fabric along the board, it is easy to perfectly smooth out the long sleeves.
Can be used handy tool – rolled up towel. The principle of operation in this case is the same - the roller is inserted inside the sleeve, and when ironing, the fabric is gradually moved in a circle.
Experienced housewives can achieve the perfect result with just one iron. It is necessary to fold the sleeve so that the seam is located in the middle, and iron the surface without touching the edges. At the next stage, the element is folded along the seam and ironed on both sides without smoothing the fold.
Especially carefully iron the folds located on the sleeve next to the cuff.
Men's shirts and women's blouses with short sleeve ironing is easier because they do not have cuffs. Otherwise, the procedure for ironing these products is the same.
Front (shelves) and back
First of all, the shelf with buttons is decomposed. It is better not to touch the buttons themselves with an iron so that they do not melt. Particular attention should be paid to the area next to the collar - this area of \u200b\u200bthe men's shirt is visible even when a jacket is worn on top.
After all the elements have been processed, you need to straighten the product and inspect it for unnecessary folds and creases. If necessary, problem areas are ironed, and then shirts and blouses are placed on the shoulders.
In order for the clothes not to wrinkle, they should hang freely. If you are ironing several shirts at once and have nowhere to hang them, use our tips to fold them properly.
How to fold a shirt
The sequence of actions when folding a shirt is as follows:
- all buttons are fastened on the product;
- lay out on a flat surface with the back up;
- arrange the sleeves as shown in the figure below;
- fold the lowest part of the shirt, and then the whole product in half.
A narrow strip of cardboard can be laid along the fold of the collar so that it does not shrink when the shirts lie on top of each other. They are laid on the cabinet shelf, placing the collars in different directions.
