Many couples start preparing for the wedding in advance, because there is so much to do: apply, find a place for a festive banquet, plan wedding photoshoot, create a guest list. An important detail of the preparation for the celebration is the order of a motorcade that will deliver the newlyweds with invited people to their destinations. According to tradition, wedding cars are generously decorated so that all passers-by know that young people are celebrating their marriage. The decor of the motorcade can be prepared by a vehicle rental salon or made independently.

How do wedding cars of young people and guests decorate?

The decoration of a wedding car largely depends on its brand, appearance, color, model. Vintage cars are almost not decorated: as a rule, they are only slightly decorated with items that give an understanding of their belonging to the wedding procession. These can be real or artificial flowers placed on the grille, or large rings on the hood. Limousines, as well as other “status” models of cars, are not recommended to be decorated with a lot of details - a few contrasting ribbons, a small flower arrangement or figurines of the bride and groom will suffice.

If the wedding procession consists of ordinary cars, the heroes of the occasion can use flower garlands, Balloons, bright ribbons, creating a unique decoration. Often, such motor transport escort of the bride and groom is made up of cars of friends, parents, acquaintances, so they all different colors and models. To make the whole procession look beautiful and harmonious, the newlyweds must follow several rules:

1. Cars driving ahead are as similar as possible in shades, preferably not too bright (black, white, gray, silver).
2. Cars of the most saturated shades complete the column - red, yellow, green, blue.
3. All cars must be decorated in the same style. The newlyweds will have to choose the decor of a calm classic color to match all the cars of the wedding procession.

However, there are exceptions to all rules. In some cases, the bride and groom may put cars at the head of the wedding escort. bright colors- it all depends on the style of the wedding, the tastes of the future spouses. It is good if the shade of the car and its decorations are in harmony with the outfits of the heroes of the occasion. So the wedding photographer will be able to take some beautiful shots outside while the newlyweds are inside the car. When decorating a car, you need to make sure that the decor does not look too colorful - use a maximum of two or three colors.

To make the decor look elegant, to decorate wedding cars dark colors you need to choose light, calm shades, and on cars of white, milky, sandy shades, contrasting bright details should be used. When ordering a motorcade in an agency, it is worth discussing the issue of decor in advance. The rules of some companies prohibit decorating wedding accompanying cars with their own hands. On cars covered with expensive paint, it is not recommended to glue or fasten anything. To avoid an unpleasant situation, everything needs to be discussed when contacting the agency.

In no case should decorative elements interfere with the driver's view. Lush flower garlands in front of the windshield look great, but increase the risk of an emergency - you should not put your health at risk. You also need to take care of reliable fastenings of jewelry so that rings do not fly off the hood during movement, the ribbons do not fray, and the balls do not fly off onto the track. For self-decoration of a wedding car, the following decor elements are used:

• satin, plastic, floral ribbons;
• fabrics (satin, organza, chiffon, silk);
• fresh flowers or artificial plants (which are more often used in winter);
• floral net, balloons;
• figurines or dolls of the bride and groom, figurines of rings, hearts, doves, other birds and animals;
• paper applications, posters, pompons;
• numbers with comic inscriptions: the groom's gang, the bride's mafia.

If the celebration is themed (a new trend), car decoration for the wedding should be associated with the style of the holiday. For example, if the wedding is nautical style- future spouses can decorate the car with shells, starfish. There are a lot of ideas for decorating a car with your own hands for thematic events, the main thing is to stick to the chosen direction for a harmonious appearance.

Wedding decor of the bonnet with ribbons and butterflies

There are several options for self-decorating a wedding car with butterflies and ribbons:

• In the first case, artificial insects are attached with special suction cups that prevent them from slipping off during movement. Ribbons should decorate the butterflies themselves or fix them on the radiator grill, on the door handles.
• The second design option for a wedding car involves the creation of a stretched "web" on the front of the hood of paper or nylon ribbons, where artificial insects are sewn.

Touching butterflies will be a wonderful symbol wedding celebration. Future spouses can independently cut out insects from cardboard, paper, or buy them in stores that sell needlework items. Graceful, delicate butterflies of all colors of the rainbow you can find in floristic salons - they are often decorated with festive bouquets.

How to decorate a car for a wedding with flowers and tulle

Floral arrangements are perfect for decorating a car during a wedding. Sometimes a small bouquet of live plants is enough to give the car a festive look. It looks beautiful when the cortege is decorated with flowers and fabrics at the same time. For example, a combination of flower arrangements is used along with tulle. The fabric is fixed on the hood or trunk, stretching from the glass to the bottom, where the tulle is fixed under the cover. As a rule, this design is asymmetrical. Decoration mounting options:

• Composition on the radiator.
• Flowers in the narrowest cluster of tulle near the windshield.
• Both mounting options.

Door handle decor

The handles of a wedding car are usually decorated in a concise manner. It can be a cute bow using satin, tulle, lace ribbons, a small flower boutonniere, artificial plants made of silk fabric. The heroes of the occasion can show originality by decorating the handles of vehicles with beads, rhinestones, sheathing them with openwork fabric. To make this part of the car look elegant, you do not need to overload it with decorative elements. For beautiful decoration one bright flower and a few falling ribbons are enough. See video for options:

Roof decoration on a wedding car with rings

Large wedding rings on a wedding car symbolize the marriage of the newlyweds, so they will be an ideal option for decorating a car for a celebration. The accessory can be mounted on the radiator, hood, but it also looks harmoniously on the roof of the car. Often the product is additionally decorated with bells. As a rule, rings "sit" on a pillow of fresh or artificial flowers. Another original version decorations - the use of two gold hearts instead of rings.

Master class on making wedding rings

Large wedding rings used as decorations for the newlyweds' car can be made by yourself. To create them, you will need the starting materials: water flexible pipes (about 2 meters), three AA batteries, a golden floral ribbon, two wooden rulers, artificial flowers, adhesive tape, superglue, scissors. Step by step guide to making wedding rings:

• Cut the hose into three pieces. All of them should be different sizes: from largest to smallest. The small and middle parts are future wedding accessories, and the large part will become the basis of the whole structure. The largest ring should not be larger than the prepared rulers in diameter!
• Insert an AA battery into each pipe on one side so that it sticks out halfway, then connect it to the free side of the pipe. Check if the ring is tight. If there is any doubt about the reliability of fastening, additionally fix the junction with adhesive tape or superglue.

• Wrap the resulting rings and both rulers with golden floral tape.
• Using superglue, attach the middle ring to the smallest one, as shown in the photo.
• Glue the rings with superglue or tape to the rulers, then secure them to the largest round pipe.

• It remains to steam the artificial flowers, smooth out the bumps in order to decorate the base-ring holder with them (see photo below).

• The accessory is ready to be mounted on the hood or roof of the wedding car.

How to make a heart out of balloons for a car with your own hands

Decorating the car with balloons looks solemn and festive. Future spouses can simply hang them on a web of tulle, nylon or satin ribbons, or create original compositions. Interesting idea to decorate a wedding car with balloons - a heart created with balloons. This symbol will be a wonderful decoration of the solemn cortege. Watch a video that will help you create such an original wedding accessory yourself:

Video: do-it-yourself car decoration step by step

Joint production of rings for the roof of a car, creating a huge heart with balloons, composing a flower arrangement with artificial plants - all this will help the heroes of the occasion save money, have fun, show imagination, working on a common cause. An interesting activity will unite the bride and groom even more before the wedding day, leaving a pleasant impression.

When the basic preparations are completed, it remains only to fix all the decoration elements on the wedding car. Future spouses can do this on their own or connect friends who will be happy to help them. Watch a funny video where young people decorate a wedding car.

When it comes to decorating wedding cars, the first thing that comes to mind for newlyweds is to hang balloons, wedding rings and artificial flowers on cars. This is due to the fact that this method is the most popular, but that is why it should not be used, because such cars rarely look really beautiful.

It is better to choose a fabric decor that will look restrained and sophisticated, hinting that the newlyweds spent time and applied their imagination to create it. Satin or tulle ribbons for a car for a wedding are the most common, because of their appearance, which harmonizes well with the theme of the holiday.

There are many ways to use satin ribbons to decorate a car, it all depends on the style in which the wedding is organized, so you must first decide which places will be decorated, and then choose the most suitable colors.

1. On the hood, place one or two oblique tapes that go from the radiator grille to the side mirrors. Depending on the additional decor in the form of figures or rings, the car can look both strict and elegant, as well as cute or romantic.
2. On the side mirrors or handles of cars - small ribbons of different colors will look good there.
3. On the roof of the car, around figurines with newlyweds or rings.
4. On the trunk and rear bumper: it is very beautiful if the ends of the ribbons flutter freely. But at the same time, it is necessary to monitor their length so that they do not interfere with other participants. traffic.

Ribbon decorations for cars of newlyweds and witnesses, as well as guests, are different.

For the Newlyweds, they make a pair or mirror decor - so that it is immediately clear that it is these cars that are carrying the bride and groom.

For witnesses, the width or number of fabrics is less, there are no other decorative elements, only floral arrangements are allowed.

And for the rest of the invitees, it is necessary to make a completely neutral harness on the hood or fluttering ribbons.

How to make a ribbon on a wedding car with your own hands - a master class

Often newlyweds do not want to spend money on Wedding decoration machines, because such decorations will be needed only once, and then they will gather dust.

Now for newlyweds it has ceased to be such a difficulty, because you can rent a harness - the choice is wedding agencies pretty big. The only drawback is that this decoration has been at many weddings, and if the appearance remained good, then it definitely cannot be called unique.

Therefore, if the groom, bride or organizers of the holiday want to get an inexpensive, but exclusive decoration of the wedding procession, then you can create it with my own hands. To make decorative elements from ribbons, you need to know which car the newlyweds will drive. After all, the size of the hood and body is different for different models.

If the exact parameters are not known, then you will have to make ribbons with a margin, and cut off the excess on the day of decoration.

Necessary materials:

• 8 m ribbon 10 cm wide, or 2 multi-colored ribbons 5 cm each;
• sewing machine;
• ball pen;
• 3 m of fabric tape, contrasting to the main piece of material, width 1–1.5 cm;
• 3 elastic bands 1 cm wide and 10 cm long;
• scissors;
• sewing threads.

First you need to fix an elastic band on the main tape, which will hold the decoration on the hood, as in the photo.

To do this, apply 1–2 cm of stretch to the end of the fabric and pass through several times. sewing machine forward and backward.

On the decorative tape, it is necessary to mark the middle. To do this, it is folded in half, and if possible, carefully carried out with a pen. A decorative ribbon is placed on the fastener, which will go along the entire length of the decoration, and also sewn on.

When all preparatory stages ready, begin to form waves.

To do this, 3 cm recede from the edge and pinch the main fabric. It should rise above the surface by about 1–2 cm. After that, they lay it with the top towards themselves and smooth the decorative tape on top. Now you can sew.

To form the next wave, it is necessary that from the top of the previous one to the bottom of the next one there should be the same length as the height of the wave. Then the whole tape will turn out uniform and beautiful.

Continue folding and sewing until you reach the middle of the decorative tape. There it is necessary to change the order of folding and bend the waves away from you. After that, they also continue to sew further until 3–4 cm remain until the end of the tape, into which it is necessary to attach an elastic band and fasten the entire structure.

It is important that there is a correct indent in the middle. It must be doubled, so that up to the mark on each side there is one ordinary segment of empty space.

When the entire ribbon is sewn, the last elastic band is tied in the middle of it, which will fasten the decoration to the radiator. Sometimes bows, flowers or figurines are installed at this place, for which fasteners are needed more powerful, from a silk tie 2 cm wide.

After everything is stitched and tied, the tape can be installed on the hood. It will diverge from the grille towards the side mirrors.

If you want to make the tape multi-colored, then the same actions are performed with pieces of fabric previously sewn together.

How to fix the tape on the car - easy ways

In addition, to select or create decorations, you also need to attach them to the car. This is a very important stage in the preparation of the wedding procession, because all the decor must be securely installed.

If this is not done, the most harmless thing that can happen is that he will simply fall on the road. But even this case with three-dimensional figures can be dangerous. With ribbons or fabric, newlyweds need to be more careful, because a piece of fabric that has flown away from the car can fall on the windshield behind a moving car, which will cause loss of control and an accident.

How to attach tapes:

1. The easiest way is to fix small ribbons on the mirrors or handles of the car, you can also decorate the rear wiper with them. It is enough just to tie them tightly, or to fasten them with a stapler for greater reliability. This is especially true when the ribbons hold up another decorative element.
2. The second most difficult is the fastening of the tapes on the hood. To do this, you only need to lift the cover, and fasten the ends of the tape next to the windshield. If there are protrusions on the inside and the ability to fix the elastic band, then this is done immediately without closing the lid. If not, then the ribbon is threaded through the radiator grill and tied tightly, while it is important to cut or hide the ends under the decor so that they do not spoil the appearance.
3. If the tape is light and is passed over a large area of ​​the car so that it does not move, both ends are firmly fixed. When one of the ends must be left free, strips of double-sided tape are used along the entire length of the tape.

Before using any of the methods, you need to make sure that pieces of fabric do not fall into moving or heating parts of the car. If they are going to use adhesive tape, then it is necessary to check in an inconspicuous place how it is cleaned, whether it leaves stains on the paint.

Tulle jewelry

If the newlyweds want a more airy texture from the fabric, then tulle is ideal. It is translucent, which allows it to be stacked in several layers, which will help to make a stronger accent in places.

Tulle can act as the main means for decorating a car, or be just a nice addition - it all depends on the imagination of the newlyweds.

How to decorate a car with tulle:

1. Place a strip of fabric on the hood, fixing it at the top and bottom. Due to the fact that the material does not wrinkle and keeps its shape, it is most often laid in small folds. It looks most advantageous when the decorators used two colors of tulle, which stand out most strongly against the background of the car's paint.
2. A voluminous tulle bow placed on the roof or the back of the car looks beautiful. It is also made of fabric in two shades, and is complemented by a satin ribbon that runs along the entire length of the roof. In order to make it look more advantageous, a bouquet of voluminous artificial inflorescences is placed in the core.
3. If all the decorations on the hood are made of other materials or are small in size, then you can beautifully decorate the side doors with tulle. The material is so thin that it attaches well and does not harm the rubber gaskets on the door. But to make everything look very unusual, you need to create small bows of satin or tulle, which will be strung one at a time on each strip. If possible, you can use a more sophisticated option - special buckles.
4. Use small tulle ribbons attached obliquely to the hood, and special stickers or magnets are applied to the side surfaces. A white car looks very unusual, decorated with burgundy abstract patterns and ribbons of the same color.

When only tulle is used, there is no need for an additional lining to protect the paint.

But if other, harder materials are present, then care should be taken to create a protective screen that will not be visible under the main decorative element. To do this, you can use a piece of dense fabric or a polyethylene substrate, which is sold in hardware stores.

This video will show you how to make your own wedding ribbon per car:

Decorating cars with ribbons or fabric is no longer considered a luxury - it is a common and beautiful way inform other road users that the newlyweds are driving inside. In addition, such cars cheer up everyone who sees them, so it is important to pay attention to even such an insignificant item of the program. How would you decorate the body of your wedding car?

A wedding is the brightest moment in life. I want this particular day to be extraordinary and unique, so that the bride and groom look like a real prince and princess from a fairy tale.
Decorating cars for a wedding is one of the important details wedding custom. Therefore, the design of the wedding procession must be approached no less responsibly than the decoration of the banquet hall.

So, how to decorate a car for a wedding? Traditional or creative? It all depends on your taste.

Often, a wedding cortege is made up of light-colored cars - white, silver, beige, pastel colors. But you can play in contrast. For example, put the bride in a white car, and the groom in a black one.

In this article, I will try to satisfy your interest in this topic to the maximum and offer a lot of options for decorating a car for a wedding - decorating cars for a wedding with fresh flowers, butterflies, ribbons, balls, fabric, hats. I will also talk separately about the design of cars for the bride, groom and friends - wedding guests.

The main cars in the "wedding train" are the cars of the bride and groom. They must stand out from the mass of cars of the wedding procession. In the aggregate, it is desirable to design all cars in the same style. For example, if you want to order decorations for a car in the form of yellow sunflowers, then larger compositions are installed on the main crews, and small ones on the car where the guests will sit.

The photo shows an example of decorating the car of the bride and groom. This design is ideal for.

In order to highlight the cars of the bride and groom, they can be decorated with a large stylized composition of hearts, fresh flowers, balls, fabrics, wedding rings. You can also seat bears, dolls in wedding dresses, swans on the hood. Recently, the creative design of cars for newlyweds has been popular. For examples of such decorations, see the photo.

The cars of other participants in the wedding celebration can be decorated with balloons and ribbons to match the main composition.

Decoration of cars for a wedding with balloons.

This is the cheapest and most popular way to decorate cars for a wedding with your own hands. Buy balloons made of dense quality rubber and inflate them in a medium size so that they do not burst while driving around the city.
Balloons decorate any part of the wedding carriage.

By the way, if you decide to themed wedding V romantic style, for example, or retro, then it is the balls that will act as the most important bright decoration for the wedding procession.

Balloons look festive

Naturally, they should in no way obstruct the driver's view or interfere with people sitting in the cabin. Tie them to door handles, mirrors, car antenna. And if you want to place a garland of balloons on your car, then it’s a good idea to decorate the hood or roof of the car with it.

Decorating a wedding car with butterflies.

In specialized stores or wedding salons, you can buy a set of butterflies made of organza, plastic, fabric, nylon. Butterflies can be made with your own hands from paper, and then decorate.

Decorating cars with butterflies - cheap and beautiful

They will be an excellent decoration at a wedding and will give the main flower arrangement a magical look. "Seedlings" of butterflies can be placed on the back of the car.

Decoration of cars for a wedding with ribbons

Decorating with ribbons and balloons is the most popular and cheapest way to decorate cars with your own hands. Ribbons are usually bought for such purposes from nylon or paper. Often, three multi-colored ribbons are placed next to each other on the hood on only one side or both in the form of the Latin letter V.

You can buy ready-made ribbons in the wedding salon. In this case, three tapes will be sewn into one and special elastic bands are attached to them, which are attached behind the hood.

If you want to save money and make sets of tapes with your own hands, then you need to buy tapes based on: the length of the hood multiplied by 1.5-2. The length varies depending on how they are fixed. You can additionally sew ready-made fabric flowers to the ribbons. They can be bought in a specialized salon or in the store "All for sewing"

Video: How to make the tape itself for decorating cars?

Decoration of cars with fresh flowers.

The most beautiful way to decorate wedding cars is decoration with fresh flowers. Delicate and exquisite bouquets created by the hands of a professional florist amaze with their beauty. Of course, you cannot do without the services of a specialist. After all, only a florist knows a lot of secrets on how to prolong the life of even the most capricious and delicate flower.

A composition of fresh flowers, intertwined with textiles and ribbons, with the addition of green leaves, twigs with berries, will look brilliant.

Decoration of cars for a wedding with artificial flowers.

If you decide to choose the option of decorating wedding cars with artificial flowers, then it is important that all the components of the composition are designed in a harmonious way. color scheme and made from beautiful expensive fabrics. Only then will the bouquet look elegant and expensive.

Artificial roses with organza

For example, a composition of pink roses with a white tulle bow in the middle with the addition of pink satin ribbons and green leaves will look very gentle on a black car.

Video: Decorating cars for a wedding.

Car decoration with cloth.

Surprisingly, cars are also dressed up with cloth. With the help of fabric, you can make beautiful bows, original weaves. By combining fabrics of different textures, it is really possible to create real masterpieces.

An interesting idea for decorating a car with a cloth

Creative decoration of wedding cars: top hats and hats

Do you want to turn your wedding into an unforgettable celebration filled with unusual ideas? Dress up the groom's car by installing a cylinder on it, perhaps the most creative idea. You can install a white hat or tiara on the bride's car, and a black top hat or hat on the groom's carriage.

Small cars - bride and groom

Car decoration for a wedding: photos, ideas

Creative car decoration with gerberas

Thinking through the details of the wedding celebration, the newlyweds should definitely decide what kind of transport they will order for the wedding and how it will be decorated. And if earlier the wedding cortege was made up of cars of friends and relatives and colored ribbons were hung on the car, then modern brides and grooms want to go to the registry office in a beautiful car that will take your breath away. AND we are talking both about the brand itself and the prestige of the car, and about its decoration. And even if you decide to give preference to a wedding procession without cars, then it will also need to be beautifully decorated!

If you like to be creative, then the Wedding.ws portal invites you not to order the design of a motorcade, but to decorate a car for a wedding with your own hands! How to do this, learn from the following master classes!

How to decorate a car for a wedding with your own hands?

There are many ideas for creating decorative elements for wedding cars. You just have to decide which design suits you best:

Wedding car decoration with tin cans

In American films, you can often find such a variant of decorating the newlyweds' car as a bunch of ringing tin cans that “notify everyone” that the bride and groom are driving along the road. If you also like to appear spectacularly in public, then you can decorate the car for a wedding with your own hands in the same way.

• empty tin cans;
• printed paper;
• screwdriver;
• glue;
• marker;
• hammer;
• twine.

Time: 30 minutes.

Detailed instructions:

Such car decorations as thematic banners placed on the rear window of a car rented for a wedding look interesting and original. They can be made with your own hands from cardboard or self-adhesive vinyl paper, or you can simply draw them. How exactly? Find out in the next tutorials!

• White list;
• white marker on a chalk basis;
• water and sponge.

Time: 30 minutes.

Detailed instructions:

A similar option is a banner based on self-adhesive vinyl paper:

For creative inspiration, here are two ready-made templates"Just Married" banners that can be used to decorate wedding cars. One of them can be printed on vinyl paper, and from the second one you can make a garland in the form of flags.

Live and artificial flowers are favorites among the elements used in the decoration of the celebration. And we are talking about both the design of the banquet hall and the wedding cortege. Do you also like this kind of jewelry for a wedding car? Then feel free to get down to business to create a beautiful floral garland with your own hands!

• garland with artificial greenery;
• fresh flowers (peonies, hydrangea, ranunculus);
• wire;
• floral sponges in the frame.

Time: 20 minutes.

Detailed instructions:

A wedding is a special day in the life of the newlyweds. And, of course, they want everything to be perfect. This also applies to the appearance of their car. To do this, its design must be approached with all care. Those who want to save themselves from additional troubles simply rent the attributes necessary for registration. But if you want your wedding car to stand out from the rest, then it's best to make your own car decoration. After all, this good way save.

wedding car decoration

To give the car a solemn look, it can be decorated with a wide variety of materials. Basically preference is given satin ribbons, which can have a specific color, width, and length. You can make great bows for your car out of them.

Another popular option for decorating wedding vehicles are flowers. Using live plants for this purpose is not a very smart solution, as they will quickly wither. It is best to purchase artificial ones.

If you are determined to make Wedding accessories on the car with your own hands, then you will have to prepare a specific list necessary materials. Among them you will need:

Even if there are no tools or materials in your house, you can always get them at any hardware store.

car hood decoration

Preparing the wedding car for the upcoming celebration begins with the design of the hood. If you want the car to look luxurious, then you need to strictly adhere to the following algorithm:

Door decoration

You should not have any problems decorating the car door. This can be done in two ways:

Wedding rings on the roof

A fairly common accessory that decorates a wedding car is large shiny rings. It’s also very easy to decorate a car with them beautifully.. So that you can quickly cope with this task, we give detailed instructions:

Inner part

Every couple of newlyweds wants a festive atmosphere to reign at the wedding. This can be achieved, among other things, due to the correct design of the machine. It is necessary to pay attention not only to her appearance but also the inner content. First of all, you should think about this if you are planning to shoot the bride and groom inside the car.

For starters, you can draw a steering wheel. A ribbon will be an excellent decoration for him., but do not forget about the color that should match the style of the wedding. Glasses can be decorated with luminous garlands, and if desired, they can be supplemented with stickers or photographs of young people.

Mirrors will look great with a figurine of swans, hearts or love couples. If you have sufficient financial resources, then for such a solemn event, instead of the usual ones, you can wear covers that are more consistent with the overall color scheme of the holiday.

Ideas for decorating a wedding procession

If during the celebration you are going to organize an engine system, then you will have to issue each of the cars participating in it. But first, find out how many people will come to the wedding in their own transport. So you can at least roughly estimate how much decor you need. You can do it easier and ask guests to arrange their own cars. Although in this case you cannot be sure that you will be able to withstand the overall style of the celebration. Therefore, it is best to make simple decorations and distribute them to guests in the morning.

Your main task is to make the car of the newlyweds the most beautiful and stand out from the rest of the transport. At the beginning of the column, it is recommended to put light or cars close in shade, and dark and bright models should complete it.

Balloon decoration

If you do not want to spend extra money on expensive decorations, then you can stop at the cheapest decor - balloons. This option of decorating a car is present at almost every wedding, and many even managed to get bored, but despite this, they continue to use it.

If you can't think of anything out of the ordinary, then you can just blow your ligaments. balloons and fix them on the roof, bumper or grille. But know the measure - there should not be too many balls. Also, do not forget that the balls tied to these places can get rid of at any time.

Also, various designs can be made from balls. Hearts, bows and flowers will look especially unusual. If your fantasy works well, then you can come up with something more original. A self-made structure must be tied to a dense twine and pulled between two reference points on the trunk, roof or hood.

Fabric decoration

In principle, you can use any material you like to decorate a car, but we still recommend choosing proven solutions, which are organza and tulle. These are light and transparent fabrics that hold their shape perfectly.

Get them a car Can different ways. One of them involves stretching the fabric on the hood in the form of a neat drapery, followed by fastening from the inside with a linen elastic band.

You can give an unusual look to the car by decorating it with garlands made of fabric. For this decoration, strips of 200 × 20 cm are cut out. Next, the fabric is collected on a needle and thread every 20 cm, and flowers or other decorations are sewn in the places of the formed bends.

Another original version wedding decoration on a car that you can make yourself - pom-poms. Cut tulle or organza into 70 cm strips long and 20 cm wide. Then sew them along the center with a thread and pull them off. Such pompoms can be used as independent elements or as an addition to the existing main decor.

We decorate the car with ribbons

You can decorate a car with satin, nylon or paper ribbons. The classic composition involves the use of three different colors that decorate the hood on one side. Combinations of the following shades will look great:

• White blue red;
• blue, cyan, pink;
• yellow, red, blue;
• red, pink, crimson;
• three shades of pink or any other color.

To make it easier to calculate how many centimeters you need for the tape, do the following. Measure the length of the hood and multiply by 1.5. At the finished tape, one end must be tucked in half and a piece of linen gum should be sewn to it. After that, the workpiece can be attached to the hood. Finally, the free ends of the ribbon and elastic are sewn to each other.

Another option is also possible: you must perform the same steps, but without using a needle. In this case, you will need to tie the ends of the elastic and ribbon together.

Such decoration will also give the car a solemn look. Additionally, it can be decorated with roses and bows, which will look great on the trunk lid, handles and mirrors.

We use flowers

Remember that it is best to use artificial flowers to decorate wedding transport. Living plants will retain their attractive appearance for a very short time and quickly wither, unable to withstand frost or extreme heat. Before placing the vegetation on the car, we advise you to assemble a beautifully designed composition from it.

For greater expressiveness, plants in the area of ​​\u200b\u200bthe stems can be tied with floral tape. Such a bouquet will look great on the hood or roof, where it can be fixed with a linen elastic band or tape.

More secure mounting option is a floristic sponge with suction cups, into which flowers and leaves are stuck over the entire area. And be sure that such a design will remain in its original form throughout the day until the end of the celebration. As a fastener wedding bouquets Magnets can also be used for the car, but first they should be wrapped with a soft cloth to prevent scratches on the paintwork.

A car is a mandatory attribute of any wedding and must be decorated in a certain way. If you want everything to be perfect on this day, then we advise you to think in advance about decorating for road transport. There can be many design options. The easiest solution is to rent ready-made wedding car accessories.

But if you want the holiday to be remembered for a long time, then spend a little time and make decorations for the car yourself. Having shown a little imagination, you will surely be able to create with your own hands an original decor for the car, which will not only remain in the memory of young people and guests, but will also make passers-by pay attention to the wedding transport.